Printable View
Hi, my w300i had the blank screen of death. after flashing i'm able to use the phone, but the only problem now is that if i turn off the phone and turn it back on it will take around 20 min to boot. and sometimes it dosnt. In xs++ its saying ( EROM: n/a ) why is that? and how can i fix this problem, thanks for your help in advance.
Try to flash only MAIN
Quote:
Originally Posted by SeaMonkey
No still the same
Than try with full flash (MAIN,FS and CUSTPACK)
if you dont mind can you tell me witch ones to use
23:58:34| XS++ v3.2 Dev1 (Crystal) Ready !
23:58:34| Executed on Microsoft Windows XP
23:58:38|
23:58:38| Attempting to open the interface...
23:58:38|
23:58:38| TURN OFF PHONE!
23:58:38| Hold 'C' button on phone and connect phone NOW.
23:58:38| You have 30 seconds...
23:58:38|
23:58:38| Baseband ID: 8040
23:58:38| Protocol Version: 3.1
23:58:38|
23:58:38| Sending db2010_cid00_prodid_p3l.bin...
23:58:38| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
23:58:38| This is a PRODUCTION_ID loader
23:58:38| Activating GDFS...
23:58:39| Phone name detected!
23:58:39|
23:58:39| Profiling SEMC phone...
23:58:39| Platform: DB2010
23:58:39| OTP CID: 49
23:58:39| EROM CID: 49
23:58:39| EROM Color: Red
23:58:39| IMEI: 35384001xxxxxx
23:58:39| Phone ID: W300
23:58:39| Region: ROGERS
23:58:39| CDA: CDA102499/58 R21A
23:58:39| Firmware Version: R4EA031
23:58:39| EROM: n/a
23:58:39| Ready for operation!
W300_R9A036_MAIN_GENERIC_JE_RED49
W300_R9A036_FS_ROGERS_RED49
W300i_CDA102499_58_R21A_Rogers_Canada or go to download section - custom files - W300 and find your operator by yourself
mm now it boot fast but its only blank screen :confused:.
Post log from XS here
22:51:06| You have 30 seconds...
22:51:06|
22:51:06| Baseband ID: 8040
22:51:06| Protocol Version: 3.1
22:51:06|
22:51:06| Sending db2010_cid00_prodid_p3l.bin...
22:51:06| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
22:51:06| This is a PRODUCTION_ID loader
22:51:07| Activating GDFS...
22:51:07| Phone name detected!
22:51:07|
22:51:07| Profiling SEMC phone...
22:51:07| Platform: DB2010
22:51:07| OTP CID: 49
22:51:07| EROM CID: 49
22:51:07| EROM Color: Red
22:51:07| IMEI: 35384001xxxxxx
22:51:07| Phone ID: W300
22:51:07| Region: ROGERS
22:51:07| CDA: CDA102499/58 R21A
22:51:07| Firmware Version: R9A036
22:51:07| EROM: n/a
22:51:07| Ready for operation!
22:51:11| Sendinging shutdown signal to phone...
22:51:11| Done.. You may now connect again...
22:51:11| Shutting down...
Hey, I have a similar problem when my w300 boots, also Rogers, (fido).
How did you fixed it?
thanks.