W580i Dead after changing battery

Hi All

My w580i has stopped working after i took the battery out which was nearly flat while phone was still switched on,

I put in a battery that was fully charged out of my other phone but now when i turn it on it vibrates once then about a second later vibrates again but nothing else happens it was working fine until i changed battery without switching it off.

I was going to flash phone but i cant get it to back up GDFS for some reason but the phone connects o.k



Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:359********** CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
only FLASH operation supported in that mode
Elapsed:11 secs.
Will backup GDFS now.


This is as far as it will go


Many thanks

Chris

Flash only MAIN - that should be work(you need the same MAIN like you have in phone)

Hi seamonkey

I flashed the main generic file but still have the same fault it just vibrates and sometimes the red light flashes when charger is plugged in .


Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3592******** CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35923******** CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\Administrator\Desktop\sony firmware Files\W580_R6BC002_MAIN_GENERIC_LA_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Elapsed:620 secs.


Is there anything else that can be done

Thanks Chris

Hi all

I reflashed phone like seamonkey said with main generic and fs and custom pack and the phone is back alive again.


Thanks very much for all your help

Chris:):):):)

Quote:

---

Originally Posted by chris2005

Hi all

I reflashed phone like seamonkey said with main generic and fs and custom pack and the phone is back alive again.


Thanks very much for all your help

Chris:):):):)

---

I got a same problem with my phone, can you please let me were did you download main generic and fs and custom pack from?? my phon is on Tesco Mobile. Many Thanks

from the download area