Printable View
My K810 was having problems was kinda slow and was freezing some times so i decided 2 do a master reset... i dont know much about phone softwares just use them. when i did the master reset the phone after it restarted just says please wait and stays there doing nothing what do i have 2 do.
Try flashing your phone, if your cid lower than cid53 dont use SEUS. Except a200 phone....
1again: if your cid53 you can use far+jdflasher.
1again: if your cid 53 you can use far+jdflasher.
if reflashing does work please wait problems are normaly from a damged gdfs let us know 1st how u go with flashing
sorry but hheeh im kinda dumb with this stuff i spend like 4 hours trying 2 figure it out but i cant
2. Flash your phone using SETool 2 Lite
Quote:
Step 1: Shut down your phone and open SETool 2 Lite.
Step 2: Choose your phone model.
Step 3: Press the ADD button and select the Main&FS files (.mbn & .fbn). MAIN and FS can also be bin files. In fact the only important thing is that, they're unencrypted.
Step 4: Select the archive with the customization files (.zip).After it is recognized by the program , in the left side will appear informations about the customization.The archive(.zip) contain files from tpa/preset/custom.
Step 5: Press the FLASH button.
Step 6: Connect the usb cable while holding down the "c" button un your phone. Then wait for the process to finish.
Step 7: Disconnect your phone , get the battery out for 5 seconds , reintroduce it and start up the phone.It will appear a screen with "Please Wait...", wait 1-2 minutes and then the phone will start normally.
on this i think is easyest way 2 do what u guys telling me to do eheheh can som1 tell me for example well on step 3 use this (download link) and this(dl link)
and so on :$ im sorry i know is 2 much ask but im rly dumb you all here speaking chinese to me with all the gdf fs all those stuff i have no idea what it is
if u have msn pm me it and i will help u buddie