Eroor using xs++ 3.1

Hi

Trying to flash a W810i using phone xs++ 3.1, CID50. It detects the phone ok, then when i go to flash this comes up:

20:07:03| Phone name detected!
20:07:03|
20:07:03| Profiling SEMC phone...
20:07:03| Platform: DB2010
20:07:03| OTP CID: 50
20:07:03| EROM CID: 50
20:07:03| EROM Color: Red
20:07:03| IMEI: 35657301xxxxxx
20:07:03| Phone ID: W810
20:07:03| Region: EUROPE_2
20:07:03| CDA: CDA102494/86 R6A
20:07:03| Firmware Version: R4ED001
20:07:03| EROM: n/a
20:07:03| Ready for operation!
20:09:33|
20:09:33| Sending db2010_db2012_cid50red_flash_r1a002.bin...
20:09:33| Applet ID: 060712 1520 HAN_DB2012_FLASHLOADER_R1A002_CXC1250695
20:09:33| This is a FLASH loader
20:09:33| Now flashing firmware main...
20:09:33| Flashing c:\users\sam\documents\my received files\w810_r4ce012_main_generic_hn_red50.mbn
20:09:33| Header type: BABE
20:09:34| 342 flashblocks
20:09:35| Binary acknowledge failed with: 15
20:09:35| Command: Error 0x15
20:09:35| Failed sending flashblock 1. Returnvalue 0xFFFF250B
20:09:35| Finishing flash

Any ideas?????

Most probably the firmware you want to flash is corrupted so you need to download again or use another firmware. But to be sure, first check the MAIN firmware with a program called BabeCheck(search for it) to see if it is corrupted.

I think you're trying to flash :
W810_R4CE012_MAIN_GENERIC_HN_red50 and
W810_R4ED001_FS_EUROPE_2_RED50. Those files should be the same version.

Quote:

---

Those files should be the same version.

---

Even if the firmwares aren't matching, the flashing should succeed. Most probably it is corrupted...

...or is trying to flash with an older firmware! Sometimes this cannot be done...
I had this issue on my K770i, couldn't flash an older firmware. Instead I could flash the same version and newer.

I can see your current firmware is R4ED001 and you're trying to flash R4CE012.

use the firmware that simox said. if anything happens, post the log here and we will se what we can do