Printable View
OK well someone said to
Update display driver files with the original: dispdriver_fota.dat and dispdriver0.dat
Use XS++ to upload to your phone and to this location ifs\settings\display
But im a total noob at this and want to know how to do this? please give full descriptions :D
It would be easier to just reflash your phone then put the original driver back in the phone. I had the same problem and tried the replacing method and still no change. So I decided to reflash and it fixed the problem. Hope this helps.
This is a very common issue with w580i's. You will have to reflash your phone with XS++ or setool or JDFlasher till this issue is fixed :S It's very annoying... Also watch your battery level when doing this! Flashing an almost empty phone is dangerous.
ok guys, i think i understand what the person was saying on my first post, but i need to know where to get teh original files from :O
Also @ plot
So you installed the driver and then it didnt work so you then reflashed your phone and it worked?
Thanks
***********FIXED*****************
All i did was flash it with the original drivers and it worked :D
Here is the spot to get the original drivers :D
w|fiveighty - the Slider with Style || Directory Listing
lol i was just going to tell you do that...but when i scrolled down i saw you already had done so >.<
I had this problem as well. Took me a while to figure it out but all you have to do to prevent this is to make sure you are using the correct firmware files. Use the same one that originally came with the phone. For example, if it is R8BE001, be sure to use a R8BE001 one.