Bricked w810i ??

Hi, I have been trying to fix my girls CID49 RED w810i using XS++ & setool2lite after a WSOD.

I did seem to be getting somewhere using various guides as the SE logo would come on when the charger was plugged in, but after flashing it again with the customize FS box checked it will not start at all and setool2lite will not even recognise the fone but XS++ will.

I backed up the GDFS before I did anything.
The files i used are
W810_R4EA031_MAIN_GENERIC_HN_RED49
W810_R4EA031_FS_EUROPE_2_RED49

Log from XS++


11:17:54| Attempting to open the interface...

11:17:54|

11:17:54| TURN OFF PHONE!

11:17:54| Hold 'C' button on phone and connect phone NOW.

11:17:54| You have 30 seconds...

11:17:54|

11:18:00| Baseband ID: 8040

11:18:00| Protocol Version: 3.1

11:18:00|

11:18:00| Sending db2010_cid00_prodid_p3l.bin...

11:18:01| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L

11:18:01| This is a PRODUCTION_ID loader

11:18:01| Activating GDFS...

11:18:01| Cannot open GDFS

11:18:01| Activating GDFS...

11:18:01| Cannot open GDFS

11:18:01| Activating GDFS...

11:18:01| Cannot open GDFS

11:18:01| Activating GDFS...

11:18:01| Cannot open GDFS

11:18:01| Activating GDFS...

11:18:01| Cannot open GDFS

11:18:01| Warning: IMEI name does not match GDFS name (IMEI:W810 GDFS:n/a)

11:18:01| ...using IMEI name

11:18:01|

11:18:01| Profiling SEMC phone...

11:18:01| Platform: DB2010

11:18:01| OTP CID: 49

11:18:01| EROM CID: 52

11:18:01| EROM Color: Red

11:18:01| IMEI: 35233601xxxxxx

11:18:01| Phone ID: W810

11:18:01| Region: n/a

11:18:01| CDA: n/a n/a

11:18:01| Firmware Version: n/a

11:18:01| EROM: n/a

11:18:01| Ready for operation!

11:20:20| ~~~~~~~~~~ Custpack information ~~~~~~~~~~

11:20:20| Custpack: EUROPE_1 (CDA102494/108) (W810)

11:20:20| Generic(non-branded) custpack: Yes

11:20:20| Allowed languages: en, pt, es, fr,

11:20:20| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

11:20:23| ~~~~~~~~~~ Custpack information ~~~~~~~~~~

11:20:23| Custpack: EUROPE_2 (CDA102494/4) (W810)

11:20:23| Generic(non-branded) custpack: Yes

11:20:23| Allowed languages: en, fr, de, tr, st, zu,

11:20:23| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

11:20:32|

11:20:32| Sending db2010_db2012_cid52red_flash_r2b012.bin...

11:20:32| Header: Error 0x10

11:20:32| Error: Cannot send flash loader

11:20:32| Error: Flashing failed

11:20:34| Disconnected... Unplug the phone

11:20:45| Shutting down...

SETool2lite log

ChipID:8040,EMP protocol:0301
erom_readvar: error reading unit 0/6
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
phone pre-boot failed,possible RECOVERY needed.
Elapsed:4 secs.

Cany anyone shed any light on this??? :confused:

Hello

Quote:

---

11:18:01| Profiling SEMC phone...

11:18:01| Platform: DB2010

11:18:01| OTP CID: 49

11:18:01| EROM CID: 52

11:18:01| EROM Color: Red

11:18:01| IMEI: 35233601xxxxxx

11:18:01| Phone ID: W810

11:18:01| Region: n/a

11:18:01| CDA: n/a n/a

---

A W810i with CID52 I never saw this. Try to restore the GDFS with XS++3.1

Thanks for the reply :)
Yeah I tried before and got the exact same as this

12:16:45| Baseband ID: 8040

12:16:45| Protocol Version: 3.1

12:16:45|

12:16:45| Sending db2010_cid00_prodid_p3l.bin...

12:16:45| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L

12:16:45| This is a PRODUCTION_ID loader

12:16:45| Activating GDFS...

12:16:45| Cannot open GDFS

12:16:45| Activating GDFS...

12:16:45| Cannot open GDFS

12:16:45| Activating GDFS...

12:16:45| Cannot open GDFS

12:16:45| Activating GDFS...

12:16:45| Cannot open GDFS

12:16:45| Activating GDFS...

12:16:45| Cannot open GDFS

12:16:45| Warning: IMEI name does not match GDFS name (IMEI:W810 GDFS:n/a)

12:16:45| ...using IMEI name

12:16:45|

12:16:45| Profiling SEMC phone...

12:16:45| Platform: DB2010

12:16:45| OTP CID: 49

12:16:45| EROM CID: 52

12:16:45| EROM Color: Red

12:16:45| IMEI: 35233601xxxxxx

12:16:45| Phone ID: W810

12:16:45| Region: n/a

12:16:45| CDA: n/a n/a

12:16:45| Firmware Version: n/a

12:16:45| EROM: n/a

12:16:45| Ready for operation!

12:17:06|

12:17:06| Sending db2010_db2012_cid52red_flash_r2b012.bin...

12:17:06| Header: Error 0x10

12:17:06|

12:17:06| Sending db2010_db2012_cid52red_cs_r3b009.bin...

12:17:07| Header: Error 0x10

12:17:07| Error: Failed to send CSLoader!

12:17:07| FSX Shutdown!

12:17:09| Disconnected... Unplug the phone

12:17:12| Shutting down...

I know XS++ didnt upgrade the CID to 52 because i said no to the upgrade, SEUS says my software is upto date.

I think the problem ist that XS++3.1 think your Phone is CID52. But it is not possible W810i has only CID49 and CID50.

Your log
12:17:06| Sending db2010_db2012_cid52red_flash_r2b012.bin...

My log (also W810i)
13:28:11| Sending db2010_cid49red_cs_r3a010.bin...

Try to restore the GDFS with SETool lite. You can also use the Backup from XS++3.1 to restore with SETool ;)

sry for my english :o

Same as before :(

SETool2lite log

ChipID:8040,EMP protocol:0301
erom_readvar: error reading unit 0/6
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
phone pre-boot failed,possible RECOVERY needed.
Elapsed:4 secs.

Your English is fine BTW.

Can you please make an Identify with SEtool?

Similar to the above.

ChipID:8040,EMP protocol:0301
erom_readvar: error reading unit 0/6
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
Can't load ID loader !
Elapsed:21 secs.

Quote:

---

Originally Posted by ganj4man

Similar to the above.

ChipID:8040,EMP protocol:0301
erom_readvar: error reading unit 0/6
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
Can't load ID loader !
Elapsed:21 secs.

---

First try to repair your EROM with this guide REPAIRING EROM GUIDES for most sonyericsson phones - Top Sony Forums and if you succed try to restore backup of GDFS with Setool2lite, but before restoring post log here

now i was looking and have seen this on you post

11:18:00| Sending db2010_cid00_prodid_p3l.bin...

it has no cid just 00 dont think it is ment to bo like that

it maybe the copy off xs try to download a new one if it has a cid 52 have u tryed to wright a diffrent gdfs to it or has some one eles b4 u got the phone ?as the highest cid is 50 for w810i :confused: