SE K800 on '3' HELP

Hi,

Ive followed all guides i can trying to unlock this phone.

k800 on uk '3' network.

Where am i going wrong.

What firmware and files do i need to unlock this pain in the backside?

17:39:33| Baseband ID: 9900
17:39:33| Protocol Version: 3.1
17:39:33| Phone name detected!
17:39:33|
17:39:33| Profiling SEMC phone...
17:39:33| Platform: DB2020
17:39:33| OTP CID: 49
17:39:33| EROM CID: 52
17:39:33| EROM Color: Red
17:39:33| IMEI: 35170701xxxxxx
17:39:33| Phone ID: K800
17:39:33| Region: HUTCH_1
17:39:33| CDA: CDA102511/69 R17A
17:39:33| Firmware Version: R1EJ001
17:39:33| EROM: R3A016
17:39:33| Ready for operation!

Any help would be appreciated.

Thanks in advance.

You need only K800_R1EJ001_MAIN_HUTCHISON_WI_RED52 and this tutorial:http://www.topsony.com/forum/showthread.php?t=6329, B. How to apply the generated patches to DB2020 CID52 phones

Tried the above, no joy, i either get insert correct sim, or invalid usim.

Any ideas

The step 8 from section I and III says:" When a dialog pop-up, click "Yes" to remove the patch. Click "No" to add the patch. In this case click on "No" button." Did you click "yes", or "no" ?

its now worked but with a small problem.

When backlight goes off, it stays off, even with key presses.

Any ideas?

thats a problem with the main softwere ive had it k800 loads off times just reflash it again if that doesnt solve it use a diffrent main and fs

you can use any flash it with any main as long its the k800 red52
note the FS has to match.
the custpack has to match with the phone and the language
then you can try the patch.

Quote:

---

Originally Posted by swindlerz

you can use any flash it with any main as long its the k800 red52
note the FS has to match.
the custpack has to match with the phone and the language
then you can try the patch.

---

Exactly!!!

You can use any firm, only see the CID!!!