Printable View
Hi there,
I have an w850i and when I turn the phone on I get a white blinking screen...
I tried to flash the main and fs by folowing the tutotrail in this section and downloading the files from this site but still have the problem.
I also tird to repar the erom also by the tutotrail in this section
and tried to update the phone trough SEUS but nothing worked
Taked the phone battery for a minutes but didn't help
Any idea???
Its an Cid 52 red
Thanks in advance
Post log from XS++ here without IMEI numberQuote:
Originally Posted by appie
try to replace the ribbon if it reading as a k700
im guessing bad flash. cause that happened to mine. all i did was do a full flash again.
21:33:39| XS++ v3.1 (Darwin) Ready !Quote:
Originally Posted by seamonkey
21:33:39| Executed on Microsoft Windows XP
21:37:50|
21:37:50| Attempting to open the interface...
21:37:50|
21:37:50| TURN OFF PHONE!
21:37:50| Hold 'C' button on phone and connect phone NOW.
21:37:50| You have 30 seconds...
21:37:50|
21:37:57| Baseband ID: 9900
21:37:57| Protocol Version: 3.1
21:37:57| Warning: IMEI name does not match GDFS name (IMEI:W850 GDFS:K700)
21:37:57| ...using IMEI name
21:37:57|
21:37:57| Profiling SEMC phone...
21:37:57| Platform: DB2020
21:37:57| OTP CID: 49
21:37:57| EROM CID: 52
21:37:57| EROM Color: Red
21:37:57| IMEI: 35240101xxxxxx
21:37:57| Phone ID: W850
21:37:58| Region: EUROPE_3
21:37:58| CDA: CDA102677/94 R3A
21:37:58| Firmware Version: R1KG001
21:37:58| EROM: R3A016
21:37:58| Ready for operation!
21:38:56| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
21:38:56| Custpack: APAC (CDA102568/101) (W850)
21:38:56| Generic(non-branded) custpack: Yes
21:38:56| Allowed languages: en, ms, id, tl, vi, zs,
21:38:56| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
21:39:44|
21:39:44| Sending db2020_cid01_prodid_p3j.bin...
21:39:44| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
21:39:44| This is a PRODUCTION_ID loader
21:39:45|
21:39:45| Sending db2020_mem_patcher_cid52_r2a006.bin...
21:39:45| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
21:39:45| This is a MEM_PATCHER loader
21:39:45|
21:39:46| Sending db2020_cid52red_flash_r2a005.bin...
21:39:46| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
21:39:46| This is a FLASH loader
21:39:46| Now flashing firmware main...
21:39:46| Flashing c:\documents and settings\hamza\mijn documenten\w850_r1jg001_main_generic_cy_red52.mbn
21:39:46| Header type: BABE
21:39:47| 460 flashblocks
21:43:37| Finishing flash
21:43:37| Done flashing
21:43:37| Now flashing filesystem...
21:43:37| Flashing c:\documents and settings\hamza\mijn documenten\w850_r1jg001_fs_europe_3_red52.fbn
21:43:37| Header type: BABE
21:43:37| 229 flashblocks
21:45:32| Finishing flash
21:45:32| Done flashing
21:45:32|
21:45:32| Sending db2020_red52_cs_r3a009.bin...
21:45:34| Applet ID: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
21:45:34| This is a CHIPSELECT loader
21:45:34| Activating loader...
21:45:34| Activating GDFS...
21:45:56| This loader is UNLOCKED
21:45:56| Success! CS-loader has been unlocked!
21:45:56| Uploading customization files to phone...
21:45:56| Uploading /files_to_upload to phone...
21:45:56| Sending shutdown command to phone...
21:45:56| Customizing was SUCCESSFUL!
21:45:56| Disconnecting phone...
21:45:56| You may now unplug your phone.
21:45:56| Flashing was successful
21:45:58| Disconnected... Unplug the phone
I don't understand youQuote:
Originally Posted by philzfog12
Look at my other replay...Quote:
Originally Posted by chingy
Did you have backup of your phone GDFS,if you do write it to phone,because XS++ read your GDFS like K700Quote:
Originally Posted by appie
No I don't have that....:(Quote:
Originally Posted by seamonkey
Can I download it or somthing?
hey i need w810i firmwares. can any1 give