K800i unlock gone wrong?

Hello I started off with a K800i on Orange UK. R1CB001 CID 49

I ran xss++ 3.1 and it updated the cid to 52

I then downloaded the K800 R1CB001 CID 52 files from this site (all 3 of them)

After applying the "patch" to the main firmware I ran setools with bypass db2020 security with k800 selected and all 4 files (3 firmware and the vkp unlock file as misc).

The phone now turns onto an orange screen with please wait and sticks there. Any ideas? Also setoolkit now picks up phone as k700?

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDRB2020_PRELOADER_FOR_SETOOL2
LDRB2020 LOADER FOR SETOOL2
Flash ID check:2019
Flash props sent ok
writing C:\Downloads\setool2lite_db2020 & SIMLockPatchgGen\SIMLockPatchGen_v2[1].1\SIMLockPatchGen\K800_R1CB001_MAIN_GENERIC_WI_RE D52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9100
Will flash 455 blocks...
SSW loading returns:0
writing C:\Downloads\setool2lite_db2020 & SIMLockPatchgGen\SIMLockPatchGen_v2[1].1\SIMLockPatchGen\K800_R1CB001_FS_EUROPE_1_RED52. fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:4260
Will flash 213 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Downloads\setool2lite_db2020 & SIMLockPatchgGen\SIMLockPatchGen_v2[1].1\SIMLockPatchGen\vkp\Remove_SIM_lock_K800_R1CB00 1.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44700000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:730 secs.

Now identified by this
Model:K700
MAPP CXC article: R1CB001 prgCXC1250210_GENERIC_WI
MAPP CXC version: R1CB001
Language Package:ORANGE_GEN
CDA article: CDA102511/47
CDA version: R17A
Default article: cxc1250490
Default version: R1CB001

Network LOCKED
Operator: 234-33

Elapsed:13 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52

I reflashed with XS++ 3.2 and back into the phone :P I dont think setool activated the gdfs

1. Flash FS, CDA and Main with XS++
2. Unlock with Setool - use only Main and unlock patch.

Thanks dude already there. A steep learning curve for the beginner as so many vague and ambiguos tutorials out there!

Robbie

Try my tutorial(see my signature). It is suitable for beginners too.

files might have been wrong...
reflash the phone (main, fs, customization)
then apply the patch

PLEASE NOTE MAKE BACKUP OF YOUR GDFS (START) INCASE SOMETHING GOES WRONG.

redownload the firmware for download section and reflashed it again

have k800 dead after flash tried res file setool end result
trying to launch embedded boot loader
embedded flash loader not respond
any hlp plz can this brick be brought back to life thanx s guys

use a fully charged battery, it may be due to drain out battery or show us the log you got from setool