Printable View
My W580 crashed over the weekend. It was vibrating none stop with a blank screen, so I took out the battery. Now the phone won't start up and only the red light comes on when the battery is inserted. If I reflash the phone will my phone contacts still be there? Is there a way to recover the phone numbers from the phone??
Check out the REPAIRING EROM GUIDES for most sonyericsson phones guide.
Do not flash the FS, and the user data, including the contacts will remain.Quote:
If I reflash the phone will my phone contacts still be there?
I tried using the xs++3.1 erom repair guide. It said it was successful, but the phone still can't start up.
20:52:11| XS++ v3.1 (Darwin) Ready !
20:52:11| Executed on Microsoft Windows XP
20:52:27|
20:52:27| Attempting to open the interface...
20:52:27|
20:52:27| TURN OFF PHONE!
20:52:27| Hold 'C' button on phone and connect phone NOW.
20:52:27| You have 30 seconds...
20:52:27|
20:52:30| Baseband ID: 9900
20:52:30| Protocol Version: 3.1
20:52:30| Phone name detected!
20:52:30|
20:52:30| Profiling SEMC phone...
20:52:30| Platform: DB2020
20:52:30| OTP CID: 51
20:52:30| EROM CID: 52
20:52:30| EROM Color: Red
20:52:30| IMEI: xxxxxxxxxxxxxxx
20:52:30| Phone ID: W580
20:52:30| Region: AMERICA_2
20:52:30| CDA: CDA102568/107 R8A
20:52:30| Firmware Version: R8BE001
20:52:30| EROM: R3A022
20:52:30| Ready for operation!
20:52:43|
20:52:43| Sending db2020_cid01_prodid_p3j.bin...
20:52:43| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
20:52:43| This is a PRODUCTION_ID loader
20:52:43|
20:52:43| Sending db2020_mem_patcher_cid52_r2a006.bin...
20:52:44| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
20:52:44| This is a MEM_PATCHER loader
20:52:44|
20:52:44| Sending db2020_cid52red_flash_r2a005.bin...
20:52:44| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
20:52:44| This is a FLASH loader
20:52:44| Now flashing firmware main...
20:52:44| Flashing c:\gadgets\se\erom\w580_red_cid52_r3b024_erom-fota_2007-03-12_11.bin
20:52:44| Header type: BABE
20:52:44| 4 flashblocks
20:52:46| Finishing flash
20:52:46| Done flashing
20:52:46| Flashing was successful
20:52:48| Disconnected... Unplug the phone
Is there anything else I can do??
Yes, reflash the MAIN firmware too. But ONLY the MAIN.Quote:
Is there anything else I can do??
simox,
I actually did re-flash the Main firmware with XS++ using W580_RED_CID52_R3B024_EROM-FOTA_2007-03-12_11.bin. But the phone is still red. Is there another file I used be using??
try a diffrent battry should solve it if u have done the erom and maind fs do u se tool try to do a read out from there and let me know if it has a imei missmatch in the read out
The W580_RED_CID52_R3B024_EROM-FOTA_2007-03-12_11.bin is the EROM and not the MAIN. Download a MAIN firmware for your phone (W580_R8BE001_MAIN_GENERIC_LA_RED52.mbn), and flash that too.Quote:
I actually did re-flash the Main firmware with XS++ using W580_RED_CID52_R3B024_EROM-FOTA_2007-03-12_11.bin.
So using XS++ v3.1
Here's what I performed:
1) Flashed EROM (W580_RED_CID52_R3B024_EROM-FOTA_2007-03-12_11.bin)
2) Flashed Main (W580_R8BE001_MAIN_GENERIC_LA_RED52.mbn)
3) Also tried using a different battery, but I still get that damn red light and it won't start up. Am I doing this right??
Here's the log.
00:10:26| XS++ v3.1 (Darwin) Ready !
00:10:26| Executed on Microsoft Windows XP
00:10:45|
00:10:45| Attempting to open the interface...
00:10:45|
00:10:45| TURN OFF PHONE!
00:10:45| Hold 'C' button on phone and connect phone NOW.
00:10:45| You have 30 seconds...
00:10:45|
00:10:56| Baseband ID: 9900
00:10:56| Protocol Version: 3.1
00:10:57| Phone name detected!
00:10:57|
00:10:57| Profiling SEMC phone...
00:10:57| Platform: DB2020
00:10:57| OTP CID: 51
00:10:57| EROM CID: 52
00:10:57| EROM Color: Red
00:10:57| IMEI: xxxxxxxxxxxxxx
00:10:57| Phone ID: W580
00:10:57| Region: AMERICA_2
00:10:57| CDA: CDA102568/107 R8A
00:10:57| Firmware Version: R8BE001
00:10:57| EROM: R3A022
00:10:57| Ready for operation!
00:11:15|
00:11:15| Sending db2020_cid01_prodid_p3j.bin...
00:11:16| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
00:11:16| This is a PRODUCTION_ID loader
00:11:16|
00:11:16| Sending db2020_mem_patcher_cid52_r2a006.bin...
00:11:16| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
00:11:16| This is a MEM_PATCHER loader
00:11:16|
00:11:16| Sending db2020_cid52red_flash_r2a005.bin...
00:11:16| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
00:11:16| This is a FLASH loader
00:11:16| Now flashing firmware main...
00:11:16| Flashing c:\gadgets\se\erom\w580_red_cid52_r3b024_erom-fota_2007-03-12_11.bin
00:11:16| Header type: BABE
00:11:16| 4 flashblocks
00:11:18| Finishing flash
00:11:18| Done flashing
00:11:18| Flashing was successful
00:11:21| Disconnected... Unplug the phone
00:12:03|
00:12:03| Attempting to open the interface...
00:12:03|
00:12:03| TURN OFF PHONE!
00:12:03| Hold 'C' button on phone and connect phone NOW.
00:12:03| You have 30 seconds...
00:12:03|
00:12:07| Baseband ID: 9900
00:12:07| Protocol Version: 3.1
00:12:08| Phone name detected!
00:12:08|
00:12:08| Profiling SEMC phone...
00:12:08| Platform: DB2020
00:12:08| OTP CID: 51
00:12:08| EROM CID: 52
00:12:08| EROM Color: Red
00:12:08| IMEI: xxxxxxxxxxxxxx
00:12:08| Phone ID: W580
00:12:08| Region: AMERICA_2
00:12:08| CDA: CDA102568/107 R8A
00:12:08| Firmware Version: R8BE001
00:12:08| EROM: R3A022
00:12:08| Ready for operation!
00:12:26|
00:12:26| Sending db2020_cid01_prodid_p3j.bin...
00:12:26| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
00:12:26| This is a PRODUCTION_ID loader
00:12:26|
00:12:26| Sending db2020_mem_patcher_cid52_r2a006.bin...
00:12:27| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
00:12:27| This is a MEM_PATCHER loader
00:12:27|
00:12:27| Sending db2020_cid52red_flash_r2a005.bin...
00:12:27| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
00:12:27| This is a FLASH loader
00:12:27| Now flashing firmware main...
00:12:27| Flashing c:\gadgets\se\firmware\r8be001\w580_r8be001_main_g eneric_la_red52.mbn
00:12:27| Header type: BABE
00:12:27| 460 flashblocks
00:16:22| Finishing flash
00:16:22| Done flashing
00:16:22| Flashing was successful
00:16:24| Disconnected... Unplug the phone
Hey buddy, looks like it was a coup which recivio the phone, this could aber damaged the ship flash, why not just turn on the lights and red LED, telephone contacts will not be able to recover, is an echo everything possible to repair it.
Besides your log is fine, but this tells us that the physical part in the ruling, it can not repair via software.
greetings.
So you mean, it can't be fixed to recover my contacts??