D 750 debrand , guide needed

Hi Good evening , i'm a newbite here ,

my D 750 need to debrand , guide needed pls advice

when i using XS++ foundout this phone IMEI: D 750 GDFS:W800,Main & FS is w800

and follow the further instructions the phone cannot connect to XS++ , my phone just turn on when i connect USB & press C , cannot use XS++ to back up my GDFS in other hands , SE lite can read GDFS but i was not sure if i use w800 new Main & FS will damage my phone or not ? pls give some advice for me , tks

Currently my phone use R1AA008
i live in Malaysia , KL
i gonna use R1BD001 with

W800_R1BD001_MAIN_EU_1_CA_RED49
W800_R1BD001_FS_EMEA_1_RED49



The report for my phone is like this

--------------------------------------------------------------------


20:55:30| XS++ v3.2 Dev1 (Crystal) Ready !
20:55:30| Executed on Microsoft Windows XP


20:57:02| Baseband ID: 8040
20:57:02| Protocol Version: 3.1
20:57:02|
20:57:02| Sending db2010_cid00_prodid_p3l.bin...
20:57:03| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
20:57:03| This is a PRODUCTION_ID loader
20:57:03| Activating GDFS...
20:57:03| Warning: IMEI name does not match GDFS name (IMEI:D750 GDFS:W800)
20:57:03| ...using IMEI name
20:57:03| Restarting phone - please wait...
20:57:03|
20:57:03| Disconnect phone from USB-port and wait for
20:57:03| further instructions.
20:57:03| You have 10 seconds.
20:57:03|
20:57:13| Open the battery-cover and reinsert the battery.
20:57:13| Hold C Button on phone and connect phone again.
20:57:13| You have 30 seconds.
20:57:13|

--------------------------------------------------------------------


and below this line i use SEtool2 ( LITE edition ) v 1.11

including Read GDFS & Read Flash

--------------------------------------------------------------------





Welcome to SEtool2 ( LITE edition ) v 1.11

>>>>>>>> Identify


supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:8040,EMP protocol:0301

OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:36 PAF:1 IMEI:35657600473102 CERT:RED
FLASH CID:36 COLOR:BROWN

Model:W800i
Brand:Generic Trade
MAPP CXC article: R1AA008 prgCXC1250174_CHINA_CA
MAPP CXC version: R1AA008
Language Package:APAC_1
CDA article: CDA102338/36
CDA version: R5A
Default article: cxc1250093
Default version: R1AA008

Operator: 000-00

USERCODE:0308

Elapsed:49 secs.



--------------------------------------------------------------------

>>>>>>>> Read GDFS

Will backup GDFS now.
ChipID:8040,EMP protocol:0301

OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:36 PAF:1 IMEI:35657600473102 CERT:RED
DCU60 flashing only supported for RED CID49 phones !
Elapsed:21 secs.


----------------------------------------------------------------------------


>>>>>>>> Read Flash

ChipID:8040,EMP protocol:0301

OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:36 PAF:1 IMEI:35657600473102 CERT:RED
DCU60 flashing only supported for RED CID49 phones !
Elapsed:17 secs.



----------------------------------------------------------------------------

Pls let me know that i was safe to Debrand it , thanks

You can´t use SETool lite because you got CID36, use XS++ v3.1 instead. Your phone needs to be converted from brown erom to red erom first, before you flash it, or you just flash a brown firmware.

Quote:

---

Originally Posted by MadMax71

You can´t use SETool lite because you got CID36, use XS++ v3.1 instead. Your phone needs to be converted from brown erom to red erom first, befor you flash it, or you just flash a brown firmware.

---

Grettings , Madmax , so for my D 750 more suitable if i use XS++ 3.1 ?

my phone CID was 36 , but base on SE Lite mine is CID 49?

or just ignore this just use XS++ 3.1 ? tks



PS: D 750 is already convert to w800

quite a time , sometime when i using it

got problem , so need to debrand it , tks ^^

Use XS++ and see log!

Grettings Madmax71

After i using XS++ 3.1 Darwin , got following problem

cannot backup / read my GDFS , pls give me some advice thanks


__________________________________________________ ___________________

21:31:42| XS++ v3.1 (Darwin) Ready !
21:31:42| Executed on Microsoft Windows XP
21:31:48|
21:31:48| Attempting to open the interface...
21:31:48|
21:31:48| TURN OFF PHONE!
21:31:48| Hold 'C' button on phone and connect phone NOW.
21:31:48| You have 30 seconds...
21:31:48|
21:31:53| Baseband ID: 8040
21:31:53| Protocol Version: 3.1
21:31:53|
21:31:54| Sending db2010_cid00_prodid_p3l.bin...
21:31:54| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
21:31:54| This is a PRODUCTION_ID loader
21:31:54| Activating GDFS...
21:31:55| Warning: IMEI name does not match GDFS name (IMEI:D750 GDFS:W800)
21:31:55| ...using IMEI name
21:31:55| Restarting phone - please wait...
21:31:55|
21:31:55| Disconnect phone from USB-port and wait for
21:31:55| further instructions.
21:31:55| You have 10 seconds.
21:31:55|
21:32:05| Open the battery-cover and reinsert the battery.
21:32:05| Hold C Button on phone and connect phone again.
21:32:05| You have 30 seconds.
21:32:05|
21:32:22| Baseband ID: 8040
21:32:22| Protocol Version: 3.1
21:32:22| Phone has restarted successfully...
21:32:22|
21:32:22| Profiling SEMC phone...
21:32:22| Platform: DB2010
21:32:22| OTP CID: 36
21:32:22| EROM CID: 36
21:32:22| EROM Color: Brown
21:32:22| IMEI: 35657600xxxxxx
21:32:22| Phone ID: D750
21:32:22| Region: APAC_1
21:32:22| CDA: CDA102338/36 R5A
21:32:22| Firmware Version: R1AA008
21:32:22| EROM: n/a
21:32:22| Ready for operation!
21:32:39|
21:32:39| Sending db2010_cid49brown_cs_v23.bin...
21:32:39| Prologue: Failed
21:32:39| Error: Failed to send CSLoader!
21:32:39| FSX Shutdown!
21:32:41| Disconnected... Unplug the phone

__________________________________________________ ___________________


PS: Just curious this cannot work becoz

21:32:39| Prologue: Failed ?????

wat is this mean ??

if some how show up like below

Sorry, your phone is NOT SUPPORTED

wat is this mean ?? thanks

Don´t worry about GDFS, because your phone is CID36, you can repair it with service-cable if it needs to.
First flash red erom with XS++ and DCU-60 cable, the normal one which comes with the phone, this should turn your "phone color" to red. You can try to back up GDFS!
Second flash firmware for K750 or W800 CID36 red.
Third finalize (customization).

G.Morning MadMax

flash red erom is means when i flash my phone already include in Main or FS ?

where can i find the red erom ?

Currently my phone use R1AA008
i gonna use W800 -> CID36 -> R1NA005

w800_r1na005_main_zone1_standard
w800_r1na005_fs_eu2

is this Main /FS suit for me ?

i can try to back up my GDFS at which step ?

can i convert mine phone to CID 49 ?

sorry i'm a newbite here many thing unsure so got lot of question , thanks for your help ^^

Use R1BC002 instead of R1NA005, because it´s the last official firmware released from SE.
You can try backing up your GDFS after you have flashed red erom.
The safest way to update erom should be with the kulankendi client, there is an option to update erom for free. After that it should be red- but still CID36, maybe CID49 you have to try that out and check after that with XS++.

Good day mate!

Quote:

---

Originally Posted by MadMax71

Use R1BC002 instead of R1NA005, because it´s the last official firmware released from SE.
You can try backing up your GDFS after you have flashed red erom.
The safest way to update erom should be with the kulankendi client, there is an option to update erom for free. After that it should be red- but still CID36, maybe CID49 you have to try that out and check after that with XS++.

Good day mate!

---

Tks Madmax , i will try it , thanks again for details , this help me a lot ^^

Oops, my fault: Kulankendi doesn´t support DB2010! So you can´t use it, sorry for that.