Common errors using setool2lite. READ BEFORE YOU POST
CREDITS TO EDPAEZ FROM SPANISH FORUM
To avoid SPAM and repeating threads, I decided to create a section for common logs that setool2lite may have. With this, you can read first before you post and perhaps you can solve your problem.
This way we can avoid repeated logs and repeated answers.
1. For rookies (newbies)
First of all you should check the identify log programs might give you (XS++ or setool2lite)
How To Post An Identify Log? - Top Sony Forums
2. Before asking that XS++ or setool2lite does not recognize or can't connect a phone, you must check several things:
-USB Flash Drivers installed
-CHARGED battery
-USB or service cable in GOOD shape with GOOD contact.
-Clean FastPort
-Try different PC ports
-Try in recovery (bootrom mode): 2+5 pressed.
3. Setool2lite handles the following phones:
DB2010/12 CID49/50/51/52, RED
DB2020 CID49/51/52 RED
NOTE: If your phone is PNX5230 or CID 53, you can only customize or flash with Far Manager + JD Flasher.
COMMON LOGS
Code:
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35601911xxxxx CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed:9 secs.
Solution: Flash ONLY Main part of the firmware, probably recovery mode will be needed.
Setool does not recognize the phone and a red light blinks when you try to connect to the PC or try to turn it on? It does not power ON?
This means EROM damage.
Solution: Flash ONLY Main part in recovery mode (2+5)
Code:
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EK001_CXC1250316_GENERIC_HN
Restore from:R4EK001_CXC1250316_GENERIC_HN
can't open file "C:\Documents and Settings\Admin\Escritorio\FINWARE W810\Setool Lite v1.11 Mi Sony Ericsson\rest\R4EK001_CXC1250316_GENERIC_HN"
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader filesystem startup: executed
CSloader refused to start GDFS services,error is:29
loader GDFS startup failed, that is fatal
Elapsed:51 secs.
Solution: There is NO REST file or REST file is corrupted
1. Go to make_rest folder on setool.
2. Drag your Main (.mbn) over ssw2rest.exe, a file will be made.
3. Cut and paste this file (WITHOUT CHANGING NAME) on the rest folder of setool.
4. Flash MAIN and try again.
Code:
ChipID:9900,EMP protocol:0301
erom_readvar: can't read all data
erom_readvar: error reading unit 0/6
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
phone pre-boot failed,possible RECOVERY needed.
Elapsed:8 secs.
Solution: Phone is not making a good contact with setool. Check cables, fast port, usb ports. All must be clean. Try again.
IT IS ONLY CONNECTION PROBLEM.
Code:
Send superblock command NAK
Solution: Charge your battery and check your ports and cable.
Code:
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167301xxxxxx CERT:RED
FLASH CID:49 COLOR:RED
Can't read SCRC unit
Elapsed:9 secs.
Solution: GDFS damaged or corrupted, repair with setool box.
Code:
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDRB2020_PRELOADER_FOR_SETOOL2
LDRB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
CSloader version:
DB2020_FILESYSTEMLOADER_FOR_SETOOL2
loader startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:501 secs.
Solution: Flash only MAIN part, perhaps in recovery mode.
If not, flash the FS without CDA. If it turns on and gives configuration error, flash CDA.
Code:
OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744500007359 CERT:RED
FLASH CID:49 COLOR:BROWN
Model:W600i
MAPP CXC article: R7B039 prgCXC1123106_GENERIC_EE
MAPP CXC version: R7B039
Language Package:LAM_1
CDA article: CDA102453/9
CDA version: R2A
Default article: cxc1123107
Default version: R7B039
OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744500007359 CERT:RED
DCU60 flashing only supported for RED CID49 phones !
Elapsed:7 secs.
Solution: Phone is BROWN. It can only be customized with Far Manager or convert to red.
Code:
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501128276 CERT:RED
FLASH CID:53 COLOR:RED
Can't build loaders chain ;(
Elapsed:18 secs.
Solution: Phone is CID 53. Use Far Manager + JD Flasher
Code:
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4HA014_CXC1250719_GENERIC_ME
Restore from:R4HA014_CXC1250719_GENERIC_ME
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader GDFS startup: executed
Will write GDFS now.
will write 1005 variables
gdfsWrite err:11,block:1,unit:3CA
gdfsWrite err:11,block:3,unit:FA3
gdfsWrite err:11,block:3,unit:1389
gdfsWrite err:11,block:3,unit:138C
gdfsWrite err:11,block:4,unit:1774
gdfsWrite err:11,block:4,unit:1B5C
gdfsWrite err:11,block:5,unit:232B
gdfsWrite err:11,block:6,unit:2713
done
Phone detached
Elapsed:80 secs
Solution: You have a GDFS that is not original from your phone so it stays in please wait. GDFS does not match with OTP. The only soultion is to work it with service cable or box and rewrite security area of GDFS so that it works OK.
Code:
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4HA014_CXC1250719_GENERIC_ME
Restore from:R4HA014_CXC1250719_GENERIC_ME
writing D:\w300i\k310\K310-W200\W200_R4HA014_MAIN_GENERIC_ME_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:6340
Will flash 317 blocks...
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
Can't get packet properties.
verify block error
last blk:44940000,00010000
Elapsed:663 secs.
Solution: Most of the times this happens when battery is discharged during process. Use a charged battery and flash MAIN.
Code:
RESTORATION FILE NOT PRESENT
"R1DB001_CXC1250514_EU_1_CR"
YOU MUST PERFORM FULL FLASHING FOR PATCH UNLOCK
Solution: You do not have REST file.
1. Go to make_rest folder on setool.
2. Drag your Main (.mbn) over ssw2rest.exe, a file will be made.
3. Cut and paste this file (WITHOUT CHANGING NAME) on the rest folder of setool.
4. Try again.
5. ONLY DB2010 need REST files.
Code:
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EA031_CXC1123260_GENERIC_JE
Restore from:R4EA031_CXC1123260_GENERIC_JE
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader GDFS startup: executed
Will write GDFS now.
will write 67324752 variables
gdfsWrite err:A,block:14,unit:0
Exception in GDFS write. maybe bad gdfs file.
done
Failed.
Elapsed:111 secs
Solution: Fix it with a BOX. A GDFS part is damaged. Do NOT try to write a generic GDFS.
Code:
*HDR block not accepted,error:X
Solution:
-In DB2010, error 15 means no REST file
-In DB2020 it's MAIN error, flash only MAIN part
-If it is 9, 11 or 18 it means low battery, charge and try again.
Code:
FOR K790/K800/K810
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102568/111
MODEL:K790i
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:0000000000 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing I:\MODIFICACIONES PARA K790a\K790_R8BF003_MAIN_GENERIC_EV_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing I:\MODIFICACIONES PARA K790a\K790_R8BF003_FS_AMERICA_2_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:4340
HDR block not accepted,error:15
Elapsed:273 secs.
Solution: There is a problem with FS CID 52, they can't be flashed with any program.
1. Patch MAIN with quick access patch.
2. Flash FS CID 53 checking use quick access patch.
3. Then flash CDA.
It will still be CID 52.
NOTE:
All posts or threads that contain a log like these ones will be erased.
