Phone Dead After Using Setools for patching

hi every body ,
i need your help about my w800 phone
i have using setool v1.11 for patching my phone with the patch:continue_radio_playing_w800_r1bd001.vkp
this is teh log :

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3557#++++++++ CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:890D
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R1BD001_CXC1250092_EU_1_CA
Restore from:R1BD001_CXC1250092_EU_1_CA
can't open file "D:\w80\tools\setool2lite v1.11\rest\R1BD001_CXC1250092_EU_1_CA"
Starting to process VKP patch script: D:\w80\custom\patch\R1BD001\ok\radio without headset.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $45120000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:109 secs.
Will backup GDFS now.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:182 secs.
Will backup GDFS now.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:150 secs.
Abort all operations.


After that my phone can't start and it cant be detected by setools or xs++
please help me

Hi
reinstall semc driver and if it doesnt work use 2+5 and click repair in setool2lite.
friste remove that pach and if doesnt work so just add main and flash ur phone.

Another problem is that there is no restoration file in [SeTool2Lite_folder]\rest folder for your MAIN. However you can make one with [SeTool2Lite_folder]\make_rest\ssw2rest.exe
Open a command prompt and invoke it as:

Code:

---

ssw2rest [path_to_MAIN]\[W800_MAIN_name] 44020000

---

You will get a R1BD001_CXC1250092_EU_1_CA file in [SeTool2Lite_folder]\make_rest\ folder. Copy it to [SeTool2Lite_folder]\rest folder. Reflash the MAIN firmware, then apply the patch again.

If you can't make the rest file by yourself, you can find it here: RapidShare: Easy Filehosting