Printable View
I turned off my K800i and removed the battery and simcard.
After 1-2 minutes I dut in the simcard agian and the battery.
Now nothing happens when I try to trun it on :-(
It is not the battery, since I have tried woth other batteries.
Any suggestions ?
Best Regards
Henrik
Henrik _fck@hotmail.com
Must use Setool.
1. Reinsert battery and do NOT turn on phone!
2. Start Setool and click Identify
3. Hold 2 and 5 together and in the meantime put the USB cable.
When hear that sound (though that connects USB flash memory) disconnect USB cable, reinsert battery and do NOT turn on phone!
4. Start XS++ v3.1 and click Connect.
5. Hold "C" button in the meantime put the USB cable.
6. Flash only Main (K800_R8BF003_MAIN_GENERIC_WI_RED52), then again disconnect USB cable, reinsert battery and now can turn on phone - work fine as before.
Hi senter,
Thanks for your quick response. I will try that and let you know.
The K800 is now alive :-)
I did not have to flash it... only the step you mentioned until
the flash part.
THANX
Br
Henrik
why does this things happens when u haven't doen anything with the phone, i could understand if it had happend after u flashed the phone but u just took out the sim .