Debranding K810 problems

hi guys i tried to debrand a K810 (currently has nasty T-Mobile interface)

So i downloaded 2 files, after looking through some other posts

a) K810_R8BA024_FS_S_E_EUROPE_RED52.fbn
b) K810_R8BA024_MAIN_GENERIC_SM_RED52.mbn

I used XS++ to flash Main Firmware and File System. According to XS++ the whole operation was successful so i disconnected the phone and inserted a SIM card in it. It powered on which was good news but when i got to the PIN screen no stars were appearing as i was typing a valid PIN code in and when i typed it in and pressed ok, i got an error message saying

"Configuration error. Please contact your network operator or service centre.

Have i done something wrong here or am i missing something out...below is a log of the phone AFTER it has been flashed with the above mentioned flashes

16:05:34| Attempting to open the interface...
16:05:34|
16:05:35| TURN OFF PHONE!
16:05:35| Hold 'C' button on phone and connect phone NOW.
16:05:35| You have 30 seconds...
16:05:35|
16:05:38| Baseband ID: 9900
16:05:38| Protocol Version: 3.1
16:05:38| Phone name detected!
16:05:38|
16:05:38| Profiling SEMC phone...
16:05:38| Platform: DB2020
16:05:38| OTP CID: 51
16:05:38| EROM CID: 52
16:05:38| EROM Color: Red
16:05:38| IMEI: 35612701xxxxxx
16:05:38| Phone ID: K810
16:05:38| Region: T_MOB_INT_A
16:05:38| CDA: CDA102779/51 R6A
16:05:38| Firmware Version: R1KG001
16:05:38| EROM: R3A022
16:05:38| Ready for operation!

what can i do to correct what has happened? Thanks in advance

You must finalize your phone ( apply custom file ).

Look at example:

Quote:

---

Finalization = Completing flashing operations and storing basic settings that phone needs to properly operate [i.e. security certificates, (and this is why phone displays "configuration error" if it is not properly done)].

Firmware has two parts:
1. FS: It contains languages, images, sounds, animations, settings, etc. Anything that isn't pure software.
2. Main: It contains the software.

Note: MAIN and FS HAVE to be the same software version
MAIN R1BC002
FS R1BC002
Customization has to be same region as FS, in this case
FS = EU5 (EUROPE_5)
Customization =CDA102338/50 ( EUROPE_5 Sunrise Switzerland)

---

Nice day

Unfortunately I got the same problem. I am completely new to this, tried flashing my phone today from firmware version R8BE001 CID 52 to firmware version R8BA024 CID 52.
XS++ said operation was completed successfully but when I inserted a simcard I got the same error as above. "Configuration error. Please contact your network operator or service centre."

Just like @jasmin said after flashing you need to finalize your phone with CUSTPACK ,just go to download area ,find custompacks ,your phone model and custpack.

i'm being an uber noob now, will this work?

K810i_CDA102779_33_R4A_Customized_United_Kingdom

Quote:

---

Originally Posted by asalhan

i'm being an uber noob now, will this work?

K810i_CDA102779_33_R4A_Customized_United_Kingdom

---

With FS you have use this custpack Top Sony Forums
but what language you need

i need UK english, i can see that i apply the FS and main firmware through XS++, do i also apply the custom pack through there too? if yes, where do i put the "tpa" folder and how do i get the program to look for it?

Quote:

---

Originally Posted by asalhan

i need UK english, i can see that i apply the FS and main firmware through XS++, do i also apply the custom pack through there too? if yes, where do i put the "tpa" folder and how do i get the program to look for it?

---

Use these flash files:

1. K810_R8BA024_FS_EUROPE_5_RED52
2. HB1-06_Gen_CDA102568_14_R6A_GENERIC_EUROPE_5
3. K810_R8BA024_MAIN_GENERIC_SM_RED52

On step 2 make this:

Click Extract Here on HB1-06_Gen_CDA102568_14_R6A_GENERIC_EUROPE_5

Then move folder TPA in folder own_custpack ( if you haven't create New Folder with this name ).

Then must move XS++ and folder own_custpack in New Folder and make this:

http://img112.imageshack.us/img112/3434/01lv8.jpg

Great! thanks alot for the help, worked first time.