Printable View
i been playing about trying flash my phone and iv done the bit ware you plug it in and hold the c button !
But now it get a red flashing light at the power botton and i cant do the hold c button thing so i cant get it to work with the program??
any ides whats up?
your battery is charged?
oh
if u sure ur battery phone is full it seem it has erom problem.
use 2+5 instead of c
Hi thanks i did an identify check and i got this
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:3524***********CERT:N/A
FLASH CID:52 COLOR:RED
IMEI MISMATCH ! GDFS IMEI:35536301385133
Model:W850i
Brand:Sony Ericsson
MAPP CXC article: R1JG001 prgCXC1250200_GENERIC_CY
MAPP CXC version: R1JG001
Language Package:EUROPE_1
CDA article: CDA102568/10
CDA version: R5A
Default article: cxc1250489
Default version: R1JG001
Operator: 000-00
Elapsed:11 secs.
it say somethink about the ieei missmatch??? i think i mite of used the wroung gdfs files!
dam i wish i can get my phone back! please some1 help me
Must use Setool.Quote:
Originally Posted by Gary_w850i
1. Reinsert battery and do NOT turn on phone!
2. Start Setool and click Identify
3. Hold 2 and 5 together and in the meantime put the USB cable.
When hear that sound (though that connects USB flash memory) disconnect USB cable, reinsert battery and do NOT turn on phone!
4. Start XS++ v3.1 and click Connect.
5. Hold "C" button in the meantime put the USB cable.
6. Flash only Main ( W850_R1KG001_MAIN_GENERIC_CY_RED52), then again disconnect USB cable, reinsert battery and now can turn on phone - work fine as before.
Quote:
Originally Posted by senter
Hi i just tryed this and got
12:07:42| Did not receive 0x5a. Continuing
but it dont seem to continuing?
Reinsert battery.Quote:
Originally Posted by Gary_w850i
Reinsert battery?? you mean take it out and put it back in??
Iv done what it says and keep getting the
| Did not receive 0x5a. Continuing (iv tried removeing the battery and putting it back in at this stage too)
Why the f*** did you flash GDFS to the phone??
IMEI MISMATCH ! GDFS IMEI:35536301385133
If you do not have sec units/GDFS backup then there is not more you can do...
1. Change flash IC and do empty fill procedure
2. Repair with testpoint using SETool v. 037 (Not the lite version), besides it requires additional hardware before you can perform this
wbr