Re: Very Dead S500i :( Help?
You Should can use XS++ and Flash Main and FS
Re: Very Dead S500i :( Help?
xss just hangs:
20:21:29| XS++ v3.1 (Darwin) Ready !
20:21:29| Executed on Microsoft Windows XP
20:21:35|
20:21:35| Attempting to open the interface...
20:21:35|
20:21:35| TURN OFF PHONE!
20:21:35| Hold 'C' button on phone and connect phone NOW.
20:21:35| You have 30 seconds...
20:21:35|
20:21:39| Baseband ID: 9900
20:21:39| Protocol Version: 3.1
Re: Very Dead S500i :( Help?
Must use Setool.
1. Reinsert battery and do NOT turn on phone!
2. Start Setool and click Identify
3. Hold 2 and 5 together and in the meantime put the USB cable.
When hear that sound (though that connects USB flash memory) disconnect USB cable, reinsert battery and do NOT turn on phone!
4. Start XS++ v3.1 and click Connect.
5. Hold "C" button in the meantime put the USB cable.
6. Flash only Main, then again disconnect USB cable, reinsert battery and now can turn on phone - work fine as before.
Re: Very Dead S500i :( Help?
if you are very shure that battery is ok ( more than 3,8V ) then your phone GDFS area damaged and only " dreambox " using testpoint method can repair it ( SEtool or any other tool can't repair it) .
Re: Very Dead S500i :( Help?
how much does dreambox cost?
Re: Very Dead S500i :( Help?
Re: Very Dead S500i :( Help?
Re: Very Dead S500i :( Help?
@senter:
in red blinking that method don't work.
Re: Very Dead S500i :( Help?
senter the C method does not work at all, and xss wont load on 2+5.