My W580 is DEAD, please HELP ME!

Hi there, this is my first posting, It's been 15 days since i "updated" my W580 to R6BC002 but the problem that now it doesn't even turn on, it just blinks a red light at right side. I have tried to flash write its GDFS but it says that it was unable, then i got this from my Identify:

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxxxxxxxxxx CERT:N/A
FLASH CID:52 COLOR:RED
no ack during gdfs_readvar !
Can't read SCRC unit
Elapsed:96 secs.
.
please help me!!!!!!!!!!!!1

Reinsert battery and do NOT turn on!

Use Setool, click Identify then hold 2 and 5 instead "C" button and plug USB cable. Then reninsert battery and do NOT turn on!!!
Connect to XS++ v3.1 and flash only Main: W580_R6BC002_MAIN_GENERIC_LA_RED52

May be a strange question, but have you tried to charge the battery? If it doesn't works, then the EROM is dead. Solution: REPAIRING EROM GUIDES for most sonyericsson phones

I have tried to charge it and so far it seems like charging every time i connect it to the outlet.
What about if it is all about the EROM how can i reapair it easely even when it seems like totally dead?

the other day i took it to a "technician" but he said to me that he didn't posses the necesaire software to repair my phone, I saw he tried with Setool and far.
I also heard that one of way to sove this is to fill in the phone like a emptyboard, anyone knows something about this?

Quote:

---

Originally Posted by senter

Reinsert battery and do NOT turn on!

Use Setool, click Identify then hold 2 and 5 instead "C" button and plug USB cable. Then reninsert battery and do NOT turn on!!!
Connect to XS++ v3.1 and flash only Main: W580_R6BC002_MAIN_GENERIC_LA_RED52

---

My phone doesn't respond at all when using XS++ v3.1. I feel frustrated now.

Quote:

---

Originally Posted by coolcris

My phone doesn't respond at all when using XS++ v3.1. I feel frustrated now.

---

http://www.topsony.com/forum/showpost.php?p=92462&postcount=2

Oh man, it didn't work at all. because SX ++ 3.1 could not recognize my phone, it displayed this:

15:13:17| Baseband ID: 9900
15:13:17| Protocol Version: 3.1

When i tried to flash only using Setool i got this:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors


ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxxxxxxxxxxxx CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\WIN XP\Escritorio\FLASH CONTENT\W580_R8BA024_MAIN_GENERIC_LA_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
verify block error
last blk:44A00000,00010000
Elapsed:130 secs.

Could this be the end??

Have you repaired the EROM(do you still get the red light blinking)? Follow this link to repair the EROM: REPAIRING EROM GUIDES for most sonyericsson phones

Until you repair the EROM, you cannot do anything with the phone...

I haven't repaired the EROM yet because my phone is not recognized by Phone XS at all. so now I'd like to know wich EROM should I install and how to?