Help Flashing Red light....

Hi, I have flashed my W580 for couple months and it works fine, however, I could not start the phone today and whenever I press the power button the button C will flash red light and the phone will not start up. I have tried to use the UNLOCK/REPAIR in setools, and reflash the MAIN, but still no go.....does anyone have any idea? Thank you

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:3525XXXXXXX CERT:N/A
FLASH CID:52 COLOR:RED

Model:W580i
Brand:Sony Ericsson
MAPP CXC article: R8BE001 prgCXC1123477_HONG_KONG_LA
MAPP CXC version: R8BE001
Language Package:HONG_KONG
CDA article: CDA102568/104
CDA version: R8A
Default article: cxc1123364
Default version: R8BE001

Network LOCKED
Operator: MULTIPLE

Elapsed:13 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:3525XXXXXXXXX CERT:N/A
FLASH CID:52 COLOR:RED

Model:W580i
Brand:Sony Ericsson
MAPP CXC article: R8BE001 prgCXC1123477_HONG_KONG_LA
MAPP CXC version: R8BE001
Language Package:HONG_KONG
CDA article: CDA102568/104
CDA version: R8A
Default article: cxc1123364
Default version: R8BE001

Network LOCKED
Operator: MULTIPLE

Elapsed:10 secs.
Elapsed:10 secs.

try reflashing both main and fs using xs++ then customize

if the red light blinking, you have an EROM issue. Try repairing your EROM
Tutorial: http://www.topsony.com/forum/showthread.php?t=6462

Quote:

---

Originally Posted by catalin24

if the red light blinking, you have an EROM issue. Try repairing your EROM
Tutorial: http://www.topsony.com/forum/showthread.php?t=6462

---

I tried to repair EROM with setools, but no go.... =(

i had this trouble with my k800.
Try to repair GDFS...
P.S.: sorry for my bad english

try getting a RED erom for your phone and flash it with XS++

had this problem with my k800i...
all i did is get a new software...thats it...i did that by giving it back to SE for repair and thats waht they did...( i was noob..so i was afraid of fixing it alone)..

I tired with XS++. However, I can not connect using the "Hold C" method, and XS++ needs me connect the phone use the "Hold C" method. I can't do anything using the "Hold 2+5" method.... =(

if it didnt react to setool2lite or xs i think u should use from setool and com port.