w810i XS++ 3.1 flashing woes
Hi everyone,
I have a W810i which went into a spin after I foolishly took out the memory stick while the phone was still on. After this, the white screen effect began.
I have done the following so far, after hundreds of tries (literally!):
1. Backed up GDFS
2. Flashed Main with W810_R4EA031_MAIN_GENERIC_HN_RED49 and FS with W810_R4EA031_FS_EUROPE_2_RED49 successfully. (Thanks to mohdumer!).
I have then tried to Customize the phone back to S_Asia_Levan many times, but failed. Next, I tried to Customize to Eurpoe_2 specs, in an effort to match the FS file in #2 above.
The flash starts successfully about one time in 75, but is getting stuck at the "Activating filesystem" point. Here's the log:
Quote:
13:50:18|
13:50:18| Attempting to open the interface...
13:50:18|
13:50:18| TURN OFF PHONE!
13:50:18| Hold 'C' button on phone and connect phone NOW.
13:50:18| You have 30 seconds...
13:50:18|
13:50:23| Baseband ID: 8040
13:50:23| Protocol Version: 3.1
13:50:23|
13:50:23| Sending db2010_cid00_prodid_p3l.bin...
13:50:23| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
13:50:23| This is a PRODUCTION_ID loader
13:50:23| Activating GDFS...
13:50:24| Phone name detected!
13:50:24|
13:50:24| Profiling SEMC phone...
13:50:24| Platform: DB2010
13:50:24| OTP CID: 49
13:50:24| EROM CID: 49
13:50:24| EROM Color: Red
13:50:24| IMEI: 35906100xxxxxx
13:50:24| Phone ID: W810
13:50:24| Region: S_ASIA_LEVAN
13:50:24| CDA: CDA102555/110 R2A
13:50:24| Firmware Version: R4ED001
13:50:24| EROM: n/a
13:50:24| Ready for operation!
13:50:27| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
13:50:27| Custpack: EUROPE_1 (CDA102494/108) (W810)
13:50:27| Generic(non-branded) custpack: Yes
13:50:27| Allowed languages: en, pt, es, fr,
13:50:27| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
13:50:29| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
13:50:29| Custpack: EUROPE_2 (CDA102494/15) (W810)
13:50:29| Generic(non-branded) custpack: Yes
13:50:29| Allowed languages: en, fr, de, tr, st, zu,
13:50:29| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
13:50:30|
13:50:30| Sending db2010_cid49red_cs_r3a010.bin...
13:50:33| Applet ID: 070524 1030 AN2CXC1327364_COMPACT_SEMC_CS_LOADER__R3A010
13:50:33| This is a CHIPSELECT loader
13:50:33| Activating loader...
13:50:33| Activating GDFS...
13:50:52| This loader is UNLOCKED
13:50:52| Success! CS-loader has been unlocked!
13:50:52| Uploading customization files to phone...
13:50:52| Uploading /tpa/preset/custom/CONTENT_DOWNLOAD_HOOK.itm...
13:50:52| Activating filesystem
Please help me get past this roadblock! I have tried customizing via the FSX route but have been unsuccessful in getting XS++ past the first couple of steps there.
Thanks in advance!
Re: w810i XS++ 3.1 flashing woes
Here's some additional information that may help arrive at a solution to my problem:
I've successfully flashed the Main & FS files with 810_R4EA031_MAIN_GENERIC_HN_RED49 & W810_R4EA031_FS_EUROPE_2_RED4.
I've been trying unsuccessfully to customize the phone all afternoon, but no luck on that count.
The thing though is, I've flashed Main & FS. How in the world then is the phone still being detected as a S-Asia_Levan region with a Firmware Version: R4ED001? I have finished flashing with R4EA031 versions!
Here's the customization attempt log:
Quote:
16:48:03|
16:48:03| Attempting to open the interface...
16:48:03|
16:48:03| TURN OFF PHONE!
16:48:03| Hold 'C' button on phone and connect phone NOW.
16:48:03| You have 30 seconds...
16:48:03|
16:48:03| Baseband ID: 8040
16:48:03| Protocol Version: 3.1
16:48:03|
16:48:03| Sending db2010_cid00_prodid_p3l.bin...
16:48:03| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
16:48:03| This is a PRODUCTION_ID loader
16:48:03| Activating GDFS...
16:48:04| Phone name detected!
16:48:04|
16:48:04| Profiling SEMC phone...
16:48:04| Platform: DB2010
16:48:04| OTP CID: 49
16:48:04| EROM CID: 49
16:48:04| EROM Color: Red
16:48:04| IMEI: 35906100xxxxxx
16:48:04| Phone ID: W810
16:48:04| Region: S_ASIA_LEVAN
16:48:04| CDA: CDA102555/110 R2A
16:48:04| Firmware Version: R4ED001
16:48:04| EROM: n/a
16:48:04| Ready for operation!
16:48:06| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
16:48:06| Custpack: EUROPE_1 (CDA102494/108) (W810)
16:48:06| Generic(non-branded) custpack: Yes
16:48:06| Allowed languages: en, pt, es, fr,
16:48:06| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
16:48:11| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
16:48:11| Custpack: S_ASIA_LEVAN (CDA102555/110) (W810)
16:48:11| Generic(non-branded) custpack: No
16:48:11| Allowed languages: en, ar, fa, fr, he, ru,
16:48:11| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
16:48:13|
16:48:13| Sending db2010_cid49red_cs_r3a010.bin...
16:48:13| Header: Error 0x10
16:48:13| Error: Customizing failed.
16:48:13| Error: Flashing failed
16:48:15| Disconnected... Unplug the phone
Here's the log of the successful flash of Main & FS:
Quote:
08:01:08|
08:01:08| Attempting to open the interface...
08:01:08|
08:01:08| TURN OFF PHONE!
08:01:08| Hold 'C' button on phone and connect phone NOW.
08:01:08| You have 30 seconds...
08:01:08|
08:01:08| Baseband ID: 8040
08:01:08| Protocol Version: 3.1
08:01:08|
08:01:08| Sending db2010_cid00_prodid_p3l.bin...
08:01:08| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
08:01:08| This is a PRODUCTION_ID loader
08:01:08| Activating GDFS...
08:01:09| Phone name detected!
08:01:09|
08:01:09| Profiling SEMC phone...
08:01:09| Platform: DB2010
08:01:09| OTP CID: 49
08:01:09| EROM CID: 49
08:01:09| EROM Color: Red
08:01:09| IMEI: 35906100xxxxxx
08:01:09| Phone ID: W810
08:01:09| Region: S_ASIA_LEVAN
08:01:09| CDA: CDA102555/110 R2A
08:01:09| Firmware Version: R4ED001
08:01:09| EROM: n/a
08:01:09| Ready for operation!
08:01:12|
08:01:12| Sending db2010_cid49red_flash_r2a003.bin...
08:01:12| Applet ID: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
08:01:12| This is a FLASH loader
08:01:12| Now flashing firmware main...
08:01:13| Flashing c:\se\w810_r4ea031_main_generic_hn_red49.mbn
08:01:13| Header type: BABE
08:01:13| 344 flashblocks
08:03:56| Finishing flash
08:03:56| Done flashing
08:03:56| Now flashing filesystem...
08:03:56| Flashing c:\se\w810_r4ea031_fs_europe_2_red49.fbn
08:03:56| Header type: BABE
08:03:57| 161 flashblocks
08:05:12| Finishing flash
08:05:13| Done flashing
08:05:13| Flashing was successful
08:05:15| Disconnected... Unplug the phone
08:14:50|
I've run out of options and am one step short of pulling my hair out, please help! Thanks for reading.
Re: w810i XS++ 3.1 flashing woes
Try to flash it with SeTool2Lite.
Flash your phone and How to apply or remove patch using SETool 2 Lite - Top Sony Forums
BTW: Don't create consecutive posts. Use the "Edit" option. :)
Re: w810i XS++ 3.1 flashing woes
Re: w810i XS++ 3.1 flashing woes
No luck with SETool Lite either, I'm receiving errors:
Quote:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit
Index of ./ and buy FULL.
Elapsed:2 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35906100771302 CERT:RED
ldr_on_ldr hdr no ack (10)
Elapsed:7 secs.
phone pre-boot failed,possible RECOVERY needed.
Abort all operations.
Elapsed:3 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader header not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:6 secs.
Quote:
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:9 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 36 (30)
loader prologue not accepted
Can't load ID loader !
Elapsed:5 secs.
Any more tips shall be greatly appreciated. Please help!
Re: w810i XS++ 3.1 flashing woes
Can you post the log when you connect it with XS++3.1
Re: w810i XS++ 3.1 flashing woes
I just re-flashed the phone using XS++ 3.1 Darwin and the R4KE0001 Main/FS files. Here's the log:
Quote:
16:04:49|
16:04:49| Attempting to open the interface...
16:04:49|
16:04:49| TURN OFF PHONE!
16:04:49| Hold 'C' button on phone and connect phone NOW.
16:04:49| You have 30 seconds...
16:04:49|
16:04:49| Baseband ID: 8040
16:04:49| Protocol Version: 3.1
16:04:49|
16:04:49| Sending db2010_cid00_prodid_p3l.bin...
16:04:50| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
16:04:50| This is a PRODUCTION_ID loader
16:04:50| Activating GDFS...
16:04:50| Cannot open GDFS
16:04:50| Activating GDFS...
16:04:50| Cannot open GDFS
16:04:50| Activating GDFS...
16:04:50| Cannot open GDFS
16:04:50| Activating GDFS...
16:04:50| Cannot open GDFS
16:04:50| Activating GDFS...
16:04:50| Cannot open GDFS
16:04:50| Phone name detected!
16:04:50|
16:04:50| Profiling SEMC phone...
16:04:50| Platform: DB2010
16:04:50| OTP CID: 49
16:04:50| EROM CID: 49
16:04:50| EROM Color: Red
16:04:50| IMEI: 35906100xxxxxx
16:04:50| Phone ID: W810
16:04:50| Region: S_ASIA_LEVAN
16:04:50| CDA: CDA102555/110 R2A
16:04:50| Firmware Version: R4ED001
16:04:50| EROM: n/a
16:04:50| Ready for operation!
16:04:58|
16:04:58| Sending db2010_cid49red_flash_r2a003.bin...
16:04:58| Applet ID: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
16:04:58| This is a FLASH loader
16:04:58| Now flashing firmware main...
16:04:58| Flashing c:\se\w810_r4ek001_main_generic_hn_red49.mbn
16:04:58| Header type: BABE
16:04:58| 344 flashblocks
16:07:41| Finishing flash
16:07:42| Done flashing
16:07:42| Now flashing filesystem...
16:07:42| Flashing c:\se\w810_r4ek001_fs_america_2_red49.fbn
16:07:42| Header type: BABE
16:07:42| 157 flashblocks
16:08:55| Finishing flash
16:08:56| Done flashing
16:08:56| Flashing was successful
16:08:58| Disconnected... Unplug the phone
Re: w810i XS++ 3.1 flashing woes
"16:04:50| Activating GDFS...
16:04:50| Cannot open GDFS
16:04:50| Activating GDFS...
16:04:50| Cannot open GDFS
16:04:50| Activating GDFS...
16:04:50| Cannot open GDFS
16:04:50| Activating GDFS...
16:04:50| Cannot open GDFS
16:04:50| Activating GDFS...
16:04:50| Cannot open GDFS"
there is something wrong with your GDFS if you have a backup you should try to restire it
Re: w810i XS++ 3.1 flashing woes
Thanks, but that error doesn't always appear. Here's the log from the Customization I attempted right after I flashed, no errors with GDFS this time around:
Quote:
16:15:57|
16:15:57| Attempting to open the interface...
16:15:57|
16:15:57| TURN OFF PHONE!
16:15:57| Hold 'C' button on phone and connect phone NOW.
16:15:57| You have 30 seconds...
16:15:57|
16:15:57| Baseband ID: 8040
16:15:57| Protocol Version: 3.1
16:15:57|
16:15:57| Sending db2010_cid00_prodid_p3l.bin...
16:15:57| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
16:15:57| This is a PRODUCTION_ID loader
16:15:57| Activating GDFS...
16:15:57| Cannot open GDFS
16:15:57| Activating GDFS...
16:15:58| Phone name detected!
16:15:58|
16:15:58| Profiling SEMC phone...
16:15:58| Platform: DB2010
16:15:58| OTP CID: 49
16:15:58| EROM CID: 49
16:15:58| EROM Color: Red
16:15:58| IMEI: 35906100xxxxxx
16:15:58| Phone ID: W810
16:15:58| Region: S_ASIA_LEVAN
16:15:58| CDA: CDA102555/110 R2A
16:15:58| Firmware Version: R4ED001
16:15:58| EROM: n/a
16:15:58| Ready for operation!
16:16:02| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
16:16:02| Custpack: EUROPE_1 (CDA102494/108) (W810)
16:16:02| Generic(non-branded) custpack: Yes
16:16:02| Allowed languages: en, pt, es, fr,
16:16:02| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
16:16:09| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
16:16:09| Custpack: AMERICA_2 (CDA102494/76) (W810)
16:16:09| Generic(non-branded) custpack: Yes
16:16:09| Allowed languages: en, pb, xl,
16:16:09| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
16:16:18|
16:16:18| Sending db2010_cid49red_cs_r3a010.bin...
16:16:19| Header: Error 0x10
16:16:19| Error: Customizing failed.
16:16:19| Error: Flashing failed
16:16:21| Disconnected... Unplug the phone
16:19:40|
Re: w810i XS++ 3.1 flashing woes
@airfoil you must use: Downloads - R4EA031_RED49 - Top Sony Forums
W810_R4ED001_FS_S_ASIA_LEVAN_RED49
W810_CDA102555_110_R2A_Generic_S_ASIA_LEVAN (Download here)
W810_R4EA031_MAIN_GENERIC_HN_RED49
First flash File System
Then make customize on File System with W810_CDA102555_110_R2A_Generic_S_ASIA_LEVAN
And finaly flash Main.