How to use phone sx or xs++
i know how i felt when i first started modding my phone. not good so heres a tutorial to help you beginners out there
Uploading files to system
1. get the files you want and set up the folder directory in the folder "files_to_upload" (same location as program).
2. open xs++ and click start.
3. take your sim card and your memory card OUT NOW! Do It!
4. Hold c and insert dcu-60 (usb cable came with phone)
5. it should bring a log up about your phone containing....
IMEI
EROM CID number
EROM Phone colour
Phone model etc
6. If using phone xs you MUST have a "CID49" or lower and a "RED" phone.
XS++ supports CID51 and BROWN
7. Select FSX at the bottom right corner.
8. Now you should be on the upload page.
9. If your file directry is set up correctly carry on the step 10.
9b. If not set it up NOW!
10. Click start FSX.
11. Wait upto 5hrs for a DB2020 phone to bruteforce or 25mins for a BD2010 or before to break in.
11b. I recommed doing this overnight if you have a DB2020 as it may take slightly longer
Any questions ask or PM me
Flashing firmware and CDA
1. Download the firmware (Main, FS and Custom pack)
2. Open xs++ and connect your phone same way as above.
3. Click Flash or Flasing in bottom right
4. Open your main by clicking on the "..."
5. Tick the tick box for applying Main ONLY!
6. Click start flash
7. When completed unplug your phone and take out and replace the battery but do NOT switch it on yet
8. Reconnect same way.
9. Now untick the MAIN and find your FS (filesystem)
10. tick the box for file system ONLY!
11. Click start flash
12. When completed again unplug your phone but dont turn it on tke out and replace the battery and reconnect.
13. Untick the FS box and tick the finalise box
14. where t says CDAnnnnnnn\nn (or similiar) find your cda CDA list Here...
15. Choose any additional options from bottom half that you want and click start flash AGAIN
15. When completed remove your phone and battery for 5 seconds.
16. re-insert battery and turn on.
17. Firmware should be update to check press R*LL*L* and goto software info>firmware (or something like that).
Any help or questions or mistakes post here
