Dead w810..Help

to all

hi, i got a dead w810i here. it cant be open or detected by XS++ and Setool2 anymore. before this, i am trying to get the GDFS using setool2. i have paste the log here for setool.:confused:. anyone can help or experience something like this too ?

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
Will backup GDFS now.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:XXXXXXXXXXXXXX CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4EA031_CXC1250316_GENERIC_HN
Restore from:R4EA031_CXC1250316_GENERIC_HN
can't open file "C:\Documents and Settings\Desktop\SETool2\rest\R4EA031_CXCXXXXXXX_G ENERIC_HN"
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
Can't get packet properties.
wrong response, break.
failed, that is fatal
Elapsed:422 secs.
_________________________________
Will backup GDFS now.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
phone pre-boot failed,possible RECOVERY needed.
Elapsed:7 secs.

hi
just add w810 main (same with ur fs R4EA031) and flash ur phone.
just main and i suggest use from setool2lite.

No response from originator. Thread Closed