who can HX8306 rewrite become k500 express drivers

void RAM_ADDRESS(void)
{
Init_data(0x0021,0x0000);
Init_data(0x0040,0x0000);// Gate Scan Start Position//SCN=00000
Init_data(0x0044,0xAF00);//Horizontal RAM Address Position//HEA=0xAf, HSA=0
Init_data(0x0045,0xDB00);//Vertical RAM Address Position//VEA=0xDB, VSA=0
}

void HX8306_init(void)
{
//-----------Power_Setting_Function_1---------// Turn off all power
Init_data(0x0007,0x0004);
Init_data(0x0012,0x0000);
Init_data(0x0013,0x0000);
delayms(40);
//----------Initializing_Function_1---------------//
Init_data(0x0001,0x011B); // SM=0b, GS=0b, SS =1b, NL=1Bh->224lines.
Init_data(0x0002,0x0700); // FLD1~0=01b, B/C=1b, EOR=1b.
Init_data(0x0003,0x1030); // HWM = 0, BGR = 1, I/D1~0=11b.
Init_data(0x0004,0x0000); // CP11~0= 0h
Init_data(0x0005,0x0000); // CP17~12=0h.
Init_data(0x000b,0x1000); // NO0~1 = 01b.
//-----------Power_Setting_Function_2----------// Power On Vcom
Init_data(0x0011,0x0000); // VC2~0:0000-->REGP ,Vci1
Init_data(0x0012,0x0008); // PON=0-->Off ,
// VRH[3~0]=1000-->1.9*REGP=VREG1OUT
Init_data(0x0013,0x1517); // VCM[4~0]=10111-->0.84,VDV[4~0]=10101-->1.2
Init_data(0x0010,0x6040); // For Hiamx's HX8306A power setting. DK = 0 first.
delayms(40);
Init_data(0x0012,0x0018); // PON=1, VRH = "1000"
delayms(40);
Init_data(0x0013,0x3510); // VCOMG =1.
delayms(40);
//------------Initializing_Function_2-----------//
Init_data(0x0030,0x0004); //Gamma control 1
Init_data(0x0031,0x0205); //Gamma control 2
Init_data(0x0032,0x0303); //Gamma control 3
Init_data(0x0033,0x0000); //Gamma control 4
Init_data(0x0034,0x0504); //Gamma control 5
Init_data(0x0035,0x0205); //Gamma control 6
Init_data(0x0036,0x0400); //Gamma control 7
Init_data(0x0037,0x0000); //Gamma control 8

Init_data(0x0007,0x0105); // D1~0=01
delayms(40);
Init_data(0x0007,0x0125); // GON=1
Init_data(0x0007,0x0127); // D1~0=11
delayms(40);
Init_data(0x0007,0x0137); // DTE=1

}