k800i problems, aborted during flash

Hey, i got this locked k800i,

I wanted to unlock using this guide ( Remove SIM-lock patch generator - Top Sony Forums )

i hadnt installed the USB flash drivers yet, i booted se toolkit, it identified the phone, so i thought theres no need for the USB drivers

then i followed the guide, tried to backup gdfs but it didnt work, i made the vkp file using the qamaker.

then i loaded the vkp and the mbn in setoolkit, i thought it would create another file, but it immediately tried flashing, but flashing didnt work because usb drivers werent installed.

so i installed the usb drivers, when done installing i pulled out the usb cable out of the phone cause i wanted to reconnect to setoolkit, then i went to the se toolkit window and it said:



/////////////////////////
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701469033 CERT:RED
FLASH CID:52 COLOR:RED

Model:K800i
Brand:KPN Mobile NL
MAPP CXC article: R1JC002 prgCXC1250210_GENERIC_WI
MAPP CXC version: R1JC002
Language Package:EUROPE_2
CDA article: CDA102511/32
CDA version: R10A
Default article: cxc1250490
Default version: R1JC002

Network LOCKED
Operator: 204-16

Elapsed:6 secs.
Will backup GDFS now.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:2072 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:2090 secs.
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701469033 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
only FLASH operation supported in that mode
Elapsed:19 secs.
Will backup GDFS now.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:126 secs.

after this i tried flashing, nothing happened so i installed the usb drivers, then disconnected the usb cable, but i didnt realize flashing started as soon as the usb drivers were installed, so i aborted the flash


ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701469033 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
Abort all operations.
verify block error
last blk:44A90000,00010000
CID52 BYPASS PROCEDURE FINISHED

Elapsed:556 secs.

//////////////////////

so it started flashing as soon as installing of the drivers was complete, the window was in the background so i didnt notice, as i pulled out the usb cable it aborted the flash and messed up my phone.

now i dont have a gdfs and my phone doesnt turn on. i just bought the phone :( what to do?

you apply the quick acces patch?

get MAIN firmware version same than the one you have in the phone, and flash it

I think thats all

go to download area for the file, the exact version you need is: R1JC002 RED52

and forgot to say, when playing with phones, ALWAYS do the things as you read on the tutorials, even a minor looking insignificant mistake or bypass could cause you a very strong headache ;)

learn from others mistakes, and ASK when needed/possible/confused/unsure/paranoid

just my .2 cents

Thanks, the phone wasnt booting, i tried to flash it again with the .mbn and .vkp, it worked, now my phone works, is unlocked, and i made a gdfs backup :) thnx anyway.

Congratulations, now you have earned just another point of experience ;)