Help with K800i.

I am new to this so please bear with me.

I succesfully unbranded my K800i on 3 using XS++ using:

K800_R1KG001_FS_EUROPE_2_RED52.fbn
K800_R1KG001_MAIN_GENERIC_WI_RED52.mbn

It has worked without any problems so I decided to try and unlock my phone to pass it onto my wife (Vodafone). I was following the instructions posted here:

http://www.topsony.com/forum/showthread.php?t=6329

I used SETool 2 Lite 1.10 and backed up my GDFS. I then downloaded v1.11 and did the following:

1. In Windows Explorer drag the MAIN file (.mbn) onto SETool2 Lite v1.11 folder\qamaker\qamaker.exe. In the qamaker's folder you will get a quick_access_XXXX_XXXXXXX.vkp file.
2. Click on ... (three dots) button near MISC files box, and select the vkp file generated in step 2.
3. Tick Bypass DB2020 security checkbox.
4. Click on Add button and select the MAIN firmware file.
5. Press FLASH button.
6. Follow the instructions given by SETool2 Lite.

It appeared to work and so I left it only to discover that 3hrs later it hadn't finished. I clicked stop and then as expected my phone wouldn't turn on. I then used XS++ to apply firmware and filesystem and it appeared to work but when I switch my phone on it says "Configuration error. Please contact you your network operator or service centre". I then tried to write my GDFS using v1.11 and got the following:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3517070163**** CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
only FLASH operation supported in that mode
Elapsed:24 secs.

Thinking that it may have been due to a difference between v1.10 and v1.11 I tried to write my GDFS using v1.10 and got the same output:

Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701639019 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
only FLASH operation supported in that mode
Elapsed:36 secs.

Please could somebody help.

Many thanks,

Matt

I think you also need the custom pack or choose the cda to be flashed.

Thx. Which custom pack do I need? I assume it is this one:

K800i_CDA102511_2_R10A_Generic_Trade_UK_United_Kin gdom


Many thanks,

Matt

yes that is the correct custpack.
when using the db2020 bypass method your battery must be 100% charged no less, also you must have the lastest usb flash drivers installed.
in the setool2 lite folder enter go to drivers/USBFlash_driver/ right click on ggsemc.inf and press install. now try setool2 lite again.

Thx. Have applied the custpack and it's working now. I'll fully charge my battery and ensure that I have the latest flash drivers and try again.