Most High Quality 2.38 (A & B)

[darkandrey]

Camdriver "Most High Quality™", v.2.38 by SonarikK510 & Number1 for Ê550i/W610i.
************************************************** *****
Official site of support:
http://www.mosthq.ucoz.ru (russian-speaking)
************************************************** ******************
A-version - orignal correction of Brightness (how in a original 2.3 dirver),
B-version - correct of ISO (how in 2.35/36/37)
************************************************** ******************

Changes:
- Stable buffer for all modes - 1024kb

- Videorecord
- Normal Mode (SVR™) 16fps-21.5fps.
- Night Mode 4.5fps-10 fps

- JPEG Compression level:
Two absolutely new levels types of compression: High and Maximal

High: the original settings of high quality, taken from 2.3 original driver
~ sizes of photo: average 480kilobytes, maximal is a 560kilobytes
Quality of compression is a 89%

Maximal: photos are captures with a maximal size, for most less compression.
~ sizes of photo: average 830kilobytes, maximal is a 910kilobytes
Quality of compression is a 94%


- New autofocus settings, with less bugs and better focusing.

- LiveColours ™ - increase in a color saturation (Choose in effects menu)

- Smooth, Linear zoom (4x in videocapture and 2,2x in VGA resolution)

- User settings, changes sharpness and contrast in scenes (see User Settings)

- User settings, changes fps in videorecord (see User Settings)

- Separate to A- version (exposure correction), and to a B-version (change ISO)

- Fix Auto White Balance and Color Saturation

-New interface (gfx patch and lng file)

***
Scenes:

- Auto: Automatical Mode. Set the camera to automatically adjust settings for a picture.

- Night Landscape: use for pictures at night or in poorly lit envinronments. Due to long exposure time, the camera must be held still or placed on a stable surface. No autofocus in this mode, focus set to infinity.

- Night Mode: it is intended for shooting in twilight or at night. Because of long endurance try to hold the camera motionlessly or establish it on a steady surface. Shutter speed is 1/2 sec. Less values of sharpness and contrast.

- Landscape: use for landscape pictures. Settings for focus to prioritize distant objects. Analogue of mode Night Landscape, but no for pictures at night or in poorly lit envinronments. No autofocus in this mode, focus set to infinity.

- Beach/Snow: use for a pictures in bright envinroments to avoid underexposed images.

- Text: specialized on shooting documents, pages of books/magazines/newspapers. Increase sharpness and contrast.

- Sports: it is intended for shooting fast-moving objects. Because of short endurance take care of sufficient illumination.

***
User Settings:
You can change values of sharpness, contrast and fps of videorecord to what you want. Don't edit other settings!!!

Sharpness and Contrast.
Open camdriver, find the

AUTO_MODE = #COM_EVENT(51,00)
#COM_EVENT(03,10) // Shutter 1/8 sec
#COM_EVE.......... etc.
AUTO_MODE - name of scene, for example, this is Automatical mode

Neccessary parametrs: #COM_EVENT(56,03) (sharpness, now is it 03)
#COM_EVENT(55,00); (contrast, now is it 00)
You can use this parametrs:
(in left values in hex, in the right in dec, for change values in camdriver you needed in hex values)
F8=-8; F9=-7; FA=-6; FB=-5; FC=-4; FD=-3; FE=-2; FF=-1; 00=0; 01=1;etc up to 8=08; 08 is maximal.

AUTO_MODE - Automatical, NIGHT_MODE - Night Mode, TEXT_MODE - Text, SPORTS_MODE - Sports, TWILIGHT_LANDSCAPE - Twilight Landscape,
LANDSCAPE -Landscape, SNOWBEACH - Snow/Beach.

Frames per second in Videorecord:
Open camdriver and find a:

NORMAL_VIDEORECORD= #SET_REG(08,2B)
#COM_EVENT(03,20)
#CHANGE_MODE(34,81);

NIGHT_VIDEORECORD= #SET_REG(08,14)
#COM_EVENT(03,09)
#CHANGE_MODE(34,81);

Notes: NORMAL_VIDEORECORD - normal videorecord, NIGHT_VIDEORECORD - night vr.
#SET_REG(08,õõ) - maximal fps, when õõ - is a value.
#COM_EVENT(03,20) - minimal fps, when õõ - is a value.

You can use this parametrs:
(in left values in hex, in the right in dec, for change values in camdriver you needed in hex values)
02=1fps, 04=2fps, 06= 3fps, 08=4fps, 0A=5fps, 0C =6fps, 0E = 7fps, 0F =7.5fps, 10=8fps, 12=9fps, 14=10fps, 16=11fps, 18=12fps, 1A=13fps,
1C=14fps, 1E=15fps, 20=16fps, 22=17fps, 24=18fps, 26=19fps, 28=20fps, 2A=21fps, 2C=22fps, 2E=23fps, 30=24fps, 32=25fps, 3C=30fps

***
***
Manual ISO (Only for B version)

+0.3EV = ISO 100
+0.7EV = ISO 160
+1.0EV = ISO 200
+1.3EV = ISO 250
+1.7EV = ISO 320
+2.0EV = Auto ISO

!!! If you use value Auto ISO at night or in poorly lit envinronments, effect of reduction of noise can apply.
!!! If you use value ISO 320 effect of reduction of noise applied so small.

P.S. Sorry for my English, i know that no good, i teach English in High School, because i'm a pupil, i'm about 16 years old.

***
You must save camdriver in this path of phone File System:
IFS/SETTINGS/CAMERA

Language file in this path:
TPA/PRESET/SYSTEM/LANGUAGE

Install the patch with JD Flasher or with a Setool Lite.

Please, don't ask me how to install patch or lng file or camdriver!!!
Learn sites about SE modding! Esato or se-nse is best for that! Thanks.
************************************************** ********************
Writed and created by: SonarikK510 & Number 1, 8 February 2008.
************************************************** ********************
With respect, Bochkarev Alexander, a.k.a. "SonarikK510"
************************************************** ********************

http://mosthq.ucoz.ru/load/0-0-0-11-20

mas tarde subo fotos

[MasterMind]

Podrias subir unas comparaciones de fotos con otros Camdrivers??? es que entre tanto camdriver que existe para el w610/k550 ya ni se cual elegir o saber cual es el mejor......hasta ahora yo tengo el Puxin 8.10 que me agrada bastante....
¿A que se refiere con "aplica el parche con" y con eso del "Lenguaje"?
se deberia abrir un debate entre los mejores 3 camdriver publicados aqui en TOP SONY (I love you)

[darkandrey]

2.37

2.38a

2.38b


2.37

2.38a

2.38b

todas en modo automatico con efecto solarizar activado

[pachitorex]

Cita: ;R6BC002
;replace system graphics of db2020 phones

Esto es algo de lo que dice el parche
aqui dejo algunas fotos,la primerita es con el camdriver 2.40 de alcon3gro y las demas con la version b de sonarik,a mi gusto malita esta version,y me desactivo el parche para que saliera el cibershot al principio,pero pues,juzguen ustedes mismos
http://www.sendspace.com/file/t01jni
ahora probare la version "a"a ver que tal.

EDIT***
La version A supera a la B,el video,mejor que la version B.
Pero no lo recomiendo,esta mucho mejor el MHQ2.37 o el 2.40 alcon3gro
Ustedes juzguen
saludos!

[darkandrey]

a mi no me parece bueno el de alcon3gro las fotos salen oscuras y palidas depronto porque me acostumbre el live colours de sonarik pero no c, y la verdad este nuevo cam con ayuda de number la verdad no es muy bueno ademas no sirve el facewarp y despues cuando abro al cam dice que algo la esta utilizando lo unico bueno es qeu el 2.38 es mas clarito de noche porqeu el 2.37 es mas oscuro

Debate cual es el mejor camdriver para nuestros w610/k550

[cani3d]

hola yo ya probe los dos a y b, la verdad esta mejor el 2.37. A mi en lo personal me gusta mas, el shuter es mas lento que el del 2.37 y las fotos salen mejores con el 2.37 pero prueben a ver si a ustedes les gusta

[eliot_w810]

si yo opino que estan mejores las 2.37 pero los 2 estan buenos los recomiendo

[mgsanchezs]

A y b a que se refiere? a dos distintos tipos de camdrivers o Alfa y Beta?

[m3m1t0]

alguien podria decir cual es la configuracion adecuada para este camdriver.... sobre todo para tomar fotos con poca iluminacion que a mi me salen con mucho ruido.....
a mi entender... muchos camdrivers muy poca mejora..... envidio la camara del w810... se que son distintas pero la del w610 no puede ser tan mala......

bueno, mi pregunta era esa... que configuracion le debo poner a este cam?

[omar_alex0]

una duda respecto a este camdriver, como hago para seleccionar el live-colours, ya que en el readme solo dice esto >- LiveColours ™ - increase in a color saturation (Choose in effects menu)< pero si no enstalo el parche que cambia la interface, como selecciono el live-colours, alguien que me ayude....