ayuda con w800 cid 36!

[celularmov]

saludos amigos tengo un pequeño problema intente reparar un w800 cid 36 siguiendo los pasos del tutorial de mauro, pero me aparecio este error espero alguien pueda orientarme

v0.914021/UNI
CARD SERIAL: 000xxxx
Loaded 51 flash descriptors
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:921600
Flash ID check:200D
Flash props sent ok
OTP LOCKED:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxxxxx CERT:RED
FLASH CID:36 COLOR:RED

Model:W800i
Brand:Generic
MAPP CXC article: R1BC002 prgCXC1250092_EU_1_CA
MAPP CXC version: R1BC002
Language Package:AMERICA_1
CDA article: CDA102430/105
CDA version: R2A
Default article: cxc1250093
Default version: R1BC002

Operator: 000-00

USERCODE:0000

Elapsed:7 secs.

RECOVERY MODE STARTED
Open COM port OK
REC:041213 1452 MATCXC1326739_COMPACTCERTLOADER R2L
Fetching phone data from OTP
OTP LOCKED:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxxxxxxx CERT:BROWN
Recovery succefull. Reflash phone now
Elapsed:4 secs.
POSSIBLE GDFS FILE DETECTED, EXTRACTING PHONEBOOK
DONE EXTRACTING.
Will write GDFS now.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:921600
OTP LOCKED:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:RED
Elapsed:44 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:921600
OTP LOCKED:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxxx CERT:RED
Restarting...
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:36
Speed:921600
OTP LOCKED:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxxxxxx CERT:BROWN
LDR:041214 0816 LLECXC1326743_COMPACTPRODUCTION R2AB
Flash ID check:200D
Flash props sent ok
Setting up GDFS...
Clearing total time...
Writing simlocks...
ALL UNLOCK/LOCK CODES SET TO "82363411"
Signing...
control keys complete.
full sig complete.
Unlock DONE
Elapsed:63 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

MODEL:W800i
CDA: CDA102430/14
CDA REV: R2A
VARIANT:AMERICA_2
LANGUAGE: AE
LANGUAGE: PB
LANGUAGE: XL

Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:36
Speed:921600
OTP LOCKED:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxxx CERT:BROWN
LDR:041214 0816 LLECXC1326743_COMPACTPRODUCTION R2AB
Flash ID check:200D
Flash props sent ok
writing C:\Documents and Settings\Gargola\Mis documentos\setool3\rest\w800\W800_R1BC002_GENERIC_ USA_MAIN.ssw
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:291
Will flash 291 blocks...
SSW loading returns:0
writing C:\Documents and Settings\Gargola\Mis documentos\setool3\rest\w800\W800_R1BC002_GENERIC_ USA_FS.ssw
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:149
Will flash 149 blocks...
SSW loading returns:0
LDR:COMPACT_SEMC_FS_LOADER_SETOOL2_V23
loader startup: executed
CSloader refused to start GDFS services,error is:29
loader GDFS startup failed, that is fatal
Elapsed:543 secs.
Open COM port OK


ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:36
Speed:921600
OTP LOCKED:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxxx CERT:BROWN
LDR:041214 0816 LLECXC1326743_COMPACTPRODUCTION R2AB
Flash ID check:200D
Flash props sent ok
writing C:\Archivos de programa\setool3\eroms\k750_w800_z520_new_erom.cry
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:2
Will flash 2 blocks...
SSW loading returns:0
CID changed succefully.
Elapsed:30 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

MODEL:W800i
CDA: CDA102430/14
CDA REV: R2A
VARIANT:AMERICA_2
LANGUAGE: AE
LANGUAGE: PB
LANGUAGE: XL

Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:921600
OTP LOCKED:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxx CERT:RED
Restarting...
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:36
Speed:921600
OTP LOCKED:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:BROWN
LDR:041214 0816 LLECXC1326743_COMPACTPRODUCTION R2AB
Flash ID check:200D
Flash props sent ok
CID changed succefully.
LDR:COMPACT_SEMC_FS_LOADER_SETOOL2_V23
loader startup: executed
CSloader refused to start GDFS services,error is:29
loader GDFS startup failed, that is fatal
Elapsed:34 secs.


de antemano gracias.

[ADDIER]

podrias intentar flashear de nuevo el main del movil y ver si funciona

oader GDFS startup failed, that is fatal

no me parece daño de gdfs me parece que se rompio el main haslo lo que te digo y dinos que sucede no hagas el identify

[hyber_99]

CSloader refused to start GDFS services,error is:29
loader GDFS startup failed, that is fatal

todo lo que tienes que hacer es que cargarle la erom, k750_w800_z520_new_erom.cry y despues ya lo podras finalizar
eso es todo
saludos y postea resultados

[celularmov]

podrias intentar flashear de nuevo el main del movil y ver si funciona

oader GDFS startup failed, that is fatal

no me parece daño de gdfs me parece que se rompio el main haslo lo que te digo y dinos que sucede no hagas el identify

intente flashear unicamente el main y me da el mismo error

Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:921600
OTP LOCKED:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxxx CERT:RED
Restarting...
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:36
Speed:921600
OTP LOCKED:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:BROWN
LDR:041214 0816 LLECXC1326743_COMPACTPRODUCTION R2AB
Flash ID check:200D
Flash props sent ok
writing C:\Documents and Settings\Gargola\Mis documentos\setool3\rest\w800\W800_R1BC002_GENERIC_ USA_MAIN.ssw
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:291
Will flash 291 blocks...
SSW loading returns:0
Phone reverted to RED color.
LDR:COMPACT_SEMC_FS_LOADER_SETOOL2_V23
loader startup: executed
CSloader refused to start GDFS services,error is:29
loader GDFS startup failed, that is fatal
Elapsed:370 secs.


¿?

[hyber_99]

la solucion ya te la di, solo lee mi post anterior, aplicala y veras buenos resultados
saludos y postea tus resultados

[luzer]

recovery+erom+gdfs_in_ssw+main+fs ...

[celularmov]

recovery+erom+gdfs_in_ssw+main+fs ...

le di recovery

y luego carge erom+gdfs_in_ssw+main+fs

y me arrojo el siguiente error

v0.914023/UNI
CARD SERIAL: 000xxxxxxx
Loaded 51 flash descriptors
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:921600
Flash ID check:200D
Flash props sent ok
OTP LOCKED:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:RED
FLASH CID:36 COLOR:RED

Model:W800i
Brand:Generic
MAPP CXC article: R1BC002 prgCXC1250092_EU_1_CA
MAPP CXC version: R1BC002
Language Package:AMERICA_1
CDA article: CDA102430/105
CDA version: R2A
Default article: cxc1250093
Default version: R1BC002
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

USERCODE:0000

Elapsed:4 secs.
RECOVERY MODE STARTED
Open COM port OK
REC:041213 1452 MATCXC1326739_COMPACTCERTLOADER R2L
Fetching phone data from OTP
OTP LOCKED:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxxxx CERT:RED
Recovery succefull. Reflash phone now
Elapsed:4 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:921600
OTP LOCKED:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxxxx CERT:RED
Restarting...
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:36
Speed:921600
OTP LOCKED:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:BROWN
LDR:041214 0816 LLECXC1326743_COMPACTPRODUCTION R2AB
Flash ID check:200D
Flash props sent ok
writing C:\Archivos de programa\setool3\eroms\k750_w800_z520_new_erom.cry
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:2
Will flash 2 blocks...
SSW loading returns:0
writing C:\Archivos de programa\setool3\gdfs_in_ssw_format\z520_gdfs_in_s sw_format.ssw
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:16
Will flash 16 blocks...
SSW loading returns:0
writing C:\Documents and Settings\Gargola\Mis documentos\setool3\rest\w800\W800_R1BC002_GENERIC_ USA_MAIN.ssw
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:291
Will flash 291 blocks...
verify block error
last blk:44BE0000,00010000
Elapsed:318 secs.


ahora identifico y me arroja;

Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS BLACK (00000000)
NO VALID FLASH CID DETECTED (103)
skipping empty loader...
Can't load ID loader !
Elapsed:7 secs.


espero puedan ayudarme

[Ed_jumps]

oye amigo subele el main y fs de w800 cid 36 al celular y seleccionas las dos primeras casilla una que dice format gdfs y la otra me parce que es flasheo total o algo a si y si tu celular es cuando lo identificas en certificado:Brown tendria que seleccioonarla cuarta casilla que dice convertir a red pero si es con certificado red nada mas las dos primeras y con eso quedaria en teoria el celular.

[athos_54]

todo lo que tienes que hacer es que cargarle la erom, k750_w800_z520_new_erom.cry y despues ya lo podras finalizar
eso es todo
saludos y postea resultados

Hice esto y se me soluciono el problema.

Gracias