[RESUELTO] w600 no termina flasheo

[AlexR18]

que tal tengo un w600 ya lo e flasheado tres veces y no lo termina me tira error aaqui esta el log
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
Speed:921600
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744500409529 CERT:BROWN
FLASH CID:49 COLOR:BROWN

Model:W600i
Brand:Telefonica Movistar
MAPP CXC article: R7B039 prgCXC1123106_NAM_1_EE
MAPP CXC version: R7B039
Language Package:AMERICA_2
CDA article: CDA102453/48
CDA version: 110305
Default article: cxc1123107
Default version: R7B039
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:8 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744500409529 CERT:BROWN
Flash ID check:890D
Flash props sent ok
writing C:\Documents and Settings\Setool3\Mis documentos\v0.914020\eroms\w550_erom_red49.cry
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:2
Will flash 2 blocks...
SSW loading returns:0
Elapsed:10 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744500409529 CERT:RED
FLASH CID:49 COLOR:RED

Model:W600i
Brand:Telefonica Movistar
MAPP CXC article: R7B039 prgCXC1123106_NAM_1_EE
MAPP CXC version: R7B039
Language Package:AMERICA_2
CDA article: CDA102453/48
CDA version: 110305
Default article: cxc1123107
Default version: R7B039
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:3 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

PACKAGE CONTAINS SIMLOCKS ! USE WITH CARE !

MODEL:W600i
CDA: CDA102453/17
CDA REV: 022706
VARIANT:CINGULAR
LANGUAGE: EN
LANGUAGE: XL

Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744500409529 CERT:RED

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Open COM port OK
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R7B039_CXC1123106_NAM_1_EE
Restore from:R7B039_CXC1123106_NAM_1_EE
writing C:\Documents and Settings\Setool3\Escritorio\SonyEricsson Phones\Serie W\W600\Firmware\r7b039_CXC1123106_NAM_1_EE.ssw\r7b 039_CXC1123106_NAM_1_EE.ssw.cry
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:347
Will flash 347 blocks...
SSW loading returns:0
writing C:\Documents and Settings\Setool3\Escritorio\SonyEricsson Phones\Serie W\W600\Firmware\r7b039_america1_fs.ssw\r7b039_amer ica1_fs.ssw.cry
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:282
Will flash 282 blocks...
Send subblock NAK
Elapsed:645 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
phone pre-boot failed,possible RECOVERY needed.
Elapsed:10 secs.
Open COM port OK
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:39 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Can't load ID loader !
Elapsed:9 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744500409529 CERT:RED
FLASH CID:49 COLOR:RED

Model:W600i
Brand:Telefonica Movistar
MAPP CXC article: R7B039 prgCXC1123106_NAM_1_EE
MAPP CXC version: R7B039
Language Package:AMERICA_2
CDA article: CDA102453/48
CDA version: 110305
Default article: cxc1123107
Default version: R7B039
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:3 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744500409529 CERT:RED

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Open COM port OK
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R7B039_CXC1123106_NAM_1_EE
Restore from:R7B039_CXC1123106_NAM_1_EE
writing C:\Documents and Settings\Setool3\Escritorio\SonyEricsson Phones\Serie W\W600\Firmware\r7b039_CXC1123106_NAM_1_EE.ssw\r7b 039_CXC1123106_NAM_1_EE.ssw.cry
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:347
Will flash 347 blocks...
SSW loading returns:0
writing C:\Documents and Settings\Setool3\Escritorio\SonyEricsson Phones\Serie W\W600\Firmware\r7b039_america1_fs.ssw\r7b039_amer ica1_fs.ssw.cry
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:282
Will flash 282 blocks...
Send subblock NAK
Elapsed:549 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744500409529 CERT:RED
FLASH CID:49 COLOR:RED

Model:W600i
Brand:Telefonica Movistar
MAPP CXC article: R7B039 prgCXC1123106_NAM_1_EE
MAPP CXC version: R7B039
Language Package:AMERICA_2
CDA article: CDA102453/48
CDA version: 110305
Default article: cxc1123107
Default version: R7B039
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:41 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744500409529 CERT:RED

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Open COM port OK
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R7B039_CXC1123106_NAM_1_EE
Restore from:R7B039_CXC1123106_NAM_1_EE
Setting up GDFS...
Writing simlocks...
ALL UNLOCK/LOCK CODES SET TO "65284248"
Signing...
control keys complete.
full sig complete.
Unlock DONE
Elapsed:55 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744500409529 CERT:RED
FLASH CID:49 COLOR:RED

Model:W600i
Brand:Telefonica Movistar
MAPP CXC article: R7B039 prgCXC1123106_NAM_1_EE
MAPP CXC version: R7B039
Language Package:AMERICA_2
CDA article: CDA102453/48
CDA version: 110305
Default article: cxc1123107
Default version: R7B039
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:3 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744500409529 CERT:RED

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Open COM port OK
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R7B039_CXC1123106_NAM_1_EE
Restore from:R7B039_CXC1123106_NAM_1_EE
writing C:\Documents and Settings\Setool3\Escritorio\SonyEricsson Phones\Serie W\W600\Firmware\r7b039_CXC1123106_NAM_1_EE.ssw\r7b 039_CXC1123106_NAM_1_EE.ssw.cry
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:347
Will flash 347 blocks...
SSW loading returns:0
writing C:\Documents and Settings\Setool3\Escritorio\SonyEricsson Phones\Serie W\W600\Firmware\r7b039_america1_fs.ssw\r7b039_amer ica1_fs.ssw.cry
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:282
Will flash 282 blocks...
Send subblock NAK
Elapsed:549 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

PACKAGE CONTAINS SIMLOCKS ! USE WITH CARE !

MODEL:W600i
CDA: CDA102453/17
CDA REV: 022706
VARIANT:CINGULAR
LANGUAGE: EN
LANGUAGE: XL

Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744500409529 CERT:RED

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Open COM port OK
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744500409529 CERT:BROWN
Flash ID check:890D
Flash props sent ok
writing C:\Documents and Settings\Setool3\Escritorio\SonyEricsson Phones\Serie W\W600\Firmware\r7ca017_CXC1123106_NAM_1_EE.ssw\r7 ca017_CXC1123106_NAM_1_EE.ssw.cry
CURRENT FLASH FILE CID:49
Matching CID according file...
SSW uses dynamic hash, dynamic hash len is:348
Will flash 348 blocks...
SSW loading returns:0
writing C:\Documents and Settings\Setool3\Escritorio\SonyEricsson Phones\Serie W\W600\Firmware\r7ca017_america1_fs.ssw\r7ca017_am erica1_fs.ssw.cry
CURRENT FLASH FILE CID:49
Matching CID according file...
SSW uses dynamic hash, dynamic hash len is:261
Will flash 261 blocks...
Send subblock NAK
Elapsed:539 secs.

si alguien me puede asesorar lo agradeceria saludos

[ADDIER]

tienes la bateria, descargada,podria ser eso, o bien un problema de que le telefono este humedo dale una limpieza

[luzer]

Tambien podrias probar con otra version de firmware

[ADDIER]

tambien podria ser una buena opcion , aplica las 3 dale la limpieza, busca otra bateria, y usa un firmware mas nuevo tienes uno demasiado viejo

este es W600_R7CA017_MAIN_NAM_1_RED49.mbn

[hyber_99]

lo que he comprobado en esos equipos, es que si los flasheas sin conectar los flexores si funciona bien.
esto debido a que los flexores muchas veces los "clientes" los ponen cruzados y dan un error:D
solo flashea la tarjeta logica.
saludos

[cendamar]

O tambien necesita reparar la GDFS, en muchos casos me ha pasado.

[ADDIER]

Apoyo la respuesta de @hyber_99, de lo contrario solo mete calor al Flash IC y al CPU no mas de 10 segundos a unos 20 grados la pistola de calor, he tenido experiencia con los W600 y W300.
Suerte!

[AlexR18]

ok fue pila descargada