PDA

Ver la versión completa : AYUDA P1i MUERTO!



hugovolta
07/11/2009, 17:40:32
hola amigos de top sony!
antes de postear el tema quisiera agredecer por todo su apoyo, y bien, el asunto es que mi p1i funcionaba perfectamente hasta que algún día despues de modificarlo agregándole el walkman 3.0 se volvió demasiado lento para lo que tuve que reiniciarlo con el botón de encendido, una vez hecho esto el celular se quedaba en un círculo de reinicio constante donde no cargaba todo, hasta que lo actualicé con SEUS y funcionó de nuevo, y al poco tiempo se volvió a alentizar, pero yo no le había hecho ninguna modificación y al hacer esto lo volví a reiniciar y volvio al ciclo de reinicio, le hice de nuevo SEUS y ya no funcionó; solo enciende la pantalla en negro, ya no se ve el logo de sony ericsson al principio, nosé que hacer alguien por favor ayudeme, nosé si debo llevarlo al servicio o con algún programa como XS se podrá arreglar, leí un poco y creo que es problema de gdfs
gracias!

theroquer
02/02/2010, 22:04:31
pues ami me pasa algo parecido ....al querer modificarle el sonido ...lo apague y volvi a prender y ya no encendio adecuadamente, es mas solo se reinicia solo..!!!:a23: y la neta es que no se que hacer...ya intente con el xs y con el seus pero el seus solo me dice que mi cel ya tiene la version mas actual y no me da la opcion de volverlo a actualizar!!!ayuda por favor amigos....ayuda!!!!!

MrCeLULaR
02/02/2010, 22:52:34
Hola !!

Porque no poosteas un log de indentifity con el xs++ aver si tiene arreglo o solo por box.

saaludos

isthecrow
29/05/2010, 16:14:43
ayuda¡¡¡
io tengo el mismo problema que theroquer---ayuda porfa

este es el log que lanza mi p1:


13:06:01| XS++ v3.2 Dev1 (Crystal) Ready !
13:06:27| Executing SEMC Smartphone Operations!
13:06:27| Please hold boot key ('@' or 'C') and connect device...
13:06:39| Master Port detected: COM7
13:06:39| Slave Port detected: COM8
13:06:40| Opening Port!
13:06:40| INIT MASTER...OK!
13:06:40| PHONE INFO SAMPLED...OK!
13:06:40| EPOC APPLET HEADER SENT...OK!
13:06:40| APPLET BODY SENT...OK!
13:06:40| SHUTTING DOWN MASTER...OK!
13:06:42| Baseband ID: 7100
13:06:42| Protocol Version: 3.1
13:06:42| NEW SECURITY PHONE DETECTED! SWITCHING...
13:06:43| Speed set to 460800
13:06:43|
13:06:43| Sending db2000_cid03_prodid_p3b.bin...
13:06:44| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
13:06:44| This is a PRODUCTION_ID loader
13:06:44| Activating GDFS...
13:06:44| Cannot open GDFS
13:06:44| Activating GDFS...
13:06:44| Cannot open GDFS
13:06:44| Activating GDFS...
13:06:44| Cannot open GDFS
13:06:44| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:n/a)
13:06:44| ...using IMEI name
13:06:44|
13:06:44| Profiling EPOC smartphone...
13:06:44| Platform: DB2001
13:06:44| OTP CID: 52
13:06:44| EROM CID: 53
13:06:44| EROM Color: Red
13:06:44| IMEI: 35703301xxxxxx
13:06:44| Phone ID: P1
13:06:44| Part Number: n/a
13:06:44| Phone smartphone version: R1C01
13:06:44| Phone software version: QÝvÈòÁå‹u: õÁüOD
13:06:44| Processing Unit:
13:06:44| Organizer:
13:06:44| CDA:
13:06:44| Activating GDFS...
13:06:45| Cannot open GDFS
13:06:45| Ready for operation!

LAYMC
29/05/2010, 17:17:15
oie amigo io tmb tuve una p1 y me paso lo mismo..
haz esto mi amigo..

bajate un firmware para tu p1 en la zona de descargas el firm que sea..
estos no vienen cda main y fs..
solo es un cda.

te descargas el xs++ o si ia lo tienes.
kn el xs++ puedes flashear la p1
subes el archivo cda que te bajaste
y te va a reparar todo el daño causado amigo..
este proceso es seguro.
ia que io lo hice con mi p1
por que SEUS me dejo a medias el proceso de actualizacion.

intentalo no pierdes nada e incluso ganas de nuevo tu p1.

isthecrow
30/05/2010, 01:44:52
oie LAYMC (http://www.topsony.com/forum_es/miembros/laymc-284802.html) amigo nta que muxas gracias x la pronta respuesta solo que baje un firm en la parte de descargas ..no recuerdo cual es pero era uno generico i tenia varios archivos ..me dijeron que los comprimiera en zip i asi lo ice despues los intente subir cn el xs++ dandole en flashear pda ..pero marcaba un error que no recuerdo..no se si tenga qu bajar un firm especifico o cual me recomiendas...o podrias explicarme como es que subo el cda solamente porfavor encerio que ia stoi mui triste por haber intentado flashear con el mentado seus...gracias por la ayuda

de antemano muchas gracias por cualqier respuesta ...

LAYMC
31/05/2010, 04:28:45
pues yo lo hize kn cualquier cda.
Y claro k funciono amigo..
Mira
el cda k te bajaste esta en .rar lo descomprimes..
Y lo vuelves a comprimir pera a .ZIP
bueno abrez el xs++ marcas la casilla de smartphone o algo asi..
Conektas tu p1 modo flash
Despues creo k te salen 2
una para escojer el cda.
Y otra para k lo ubikes desde tu pc..bueno en la segunda casiya le das click en loz 3puntitos para k subas la cda.ZIP
UNa vez subido en el lado derechó creo k te marca varios archivios..
Abajito d la casiya dnd subiste el cda..ai kmo 4 cuadritos..
Seleccíonas el de FLASH ALL.
y c van a marcar todos..y pues ya solo le das click en flash pda..y listo..mandame un mp..hermano y pues te hecho una mano..

isthecrow
01/06/2010, 23:55:26
ps les cuento que..me comentaron que como mi fon era cid53 ps que por eso no queda...ia lo mande con el tecnico..haber que pasa..me lo entregan el viernes i les cuento...por todas las respuestas michas gracias amigos...:a17:

LAYMC
02/06/2010, 05:33:04
Me ubieras mandado un mp..para explicartelo por video bro..te ubieras aorrado una lana..suerte kn la p1
Ala mia le kebraron la pantalla k dolor..pero tngo mi super k850

isthecrow
04/06/2010, 22:02:26
ps les cuento que ...ia lo recogui..i ps me dijeron que no ai soft..para este fon ...ps no se ni que hacer...ayuda LAYMC (http://www.topsony.com/forum_es/miembros/laymc-284802.html)...porfa¡¡

intento hacer el flash con cualqier fw que bajo de aca y me sale esto:

19:00:20| XS++ v3.2 Dev1 (Crystal) Ready !

19:00:38| Executing SEMC Smartphone Operations!

19:00:38| Please hold boot key ('@' or 'C') and connect device...

19:00:46| Master Port detected: COM7

19:00:46| Slave Port detected: COM8

19:00:46| Opening Port!

19:00:46| INIT MASTER...OK!

19:00:46| PHONE INFO SAMPLED...OK!

19:00:46| EPOC APPLET HEADER SENT...OK!

19:00:46| APPLET BODY SENT...OK!

19:00:46| SHUTTING DOWN MASTER...OK!

19:00:48| Baseband ID: 7100

19:00:48| Protocol Version: 3.1

19:00:48| NEW SECURITY PHONE DETECTED! SWITCHING...

19:00:49| Speed set to 460800

19:00:49|

19:00:49| Sending db2000_cid03_prodid_p3b.bin...

19:00:50| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B

19:00:50| This is a PRODUCTION_ID loader

19:00:50| Activating GDFS...

19:00:50| Cannot open GDFS

19:00:50| Activating GDFS...

19:00:50| Cannot open GDFS

19:00:50| Activating GDFS...

19:00:50| Cannot open GDFS

19:00:50| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:n/a)

19:00:50| ...using IMEI name

19:00:51|

19:00:51| Profiling EPOC smartphone...

19:00:51| Platform: DB2001

19:00:51| OTP CID: 52

19:00:51| EROM CID: 53

19:00:51| EROM Color: Red

19:00:51| IMEI: 35703301xxxxxx

19:00:51| Phone ID: P1

19:00:51| Part Number: n/a

19:00:51| Phone smartphone version: R1C01

19:00:51| Phone software version:

19:00:51| Processing Unit:

19:00:51| Organizer:

19:00:51| CDA:

19:00:51| Activating GDFS...

19:00:51| Cannot open GDFS

19:00:51| Ready for operation!

19:01:10|

19:01:10| Parsing package contents...

19:01:10| IGNORING: P1_R6D23_R9G007_Trade_UK_CDA162024-5_ R6A/060524 0930 LIECXC1325414_DB2000_FLASHLOADER_R1A003

19:01:10| IGNORING: P1_R6D23_R9G007_Trade_UK_CDA162024-5_ R6A/060529_23010485_R1A

19:01:10| IGNORING: P1_R6D23_R9G007_Trade_UK_CDA162024-5_ R6A/070510_23048171_R1A

19:01:10| IGNORING: P1_R6D23_R9G007_Trade_UK_CDA162024-5_ R6A/1_CXC1327363_1_SEMC_CS_LOADER

19:01:10| IGNORING: P1_R6D23_R9G007_Trade_UK_CDA162024-5_ R6A/ACPU_CDA162024-5_ R6A_Trade_UK_ROFS

19:01:10| IGNORING: P1_R6D23_R9G007_Trade_UK_CDA162024-5_ R6A/ACPU_SW_CXC162108_BASELINE_R6D23kJ_ROF

19:01:10| IGNORING: P1_R6D23_R9G007_Trade_UK_CDA162024-5_ R6A/BbyoneSW_CXC162058

19:01:10| IGNORING: P1_R6D23_R9G007_Trade_UK_CDA162024-5_ R6A/Camara_Software

19:01:10| IGNORING: P1_R6D23_R9G007_Trade_UK_CDA162024-5_ R6A/CCPU_Signaling_SW_R9G007_ prgCXC162037_RED53.babe

19:01:10| IGNORING: P1_R6D23_R9G007_Trade_UK_CDA162024-5_ R6A/CCPU_Signaling_SW_R9G007R_RED53.babe

19:01:10| IGNORING: P1_R6D23_R9G007_Trade_UK_CDA162024-5_ R6A/Created Fri Aug 03 105449 CEST 2007 by GDFtoEMMA 1.31

19:01:10| IGNORING: P1_R6D23_R9G007_Trade_UK_CDA162024-5_ R6A/Created Fri Aug 03 165633 CEST 2007 by GDFtoEMMA 1.31

19:01:10| IGNORING: P1_R6D23_R9G007_Trade_UK_CDA162024-5_ R6A/Created Fri Aug 03 165709 CEST 2007 by GDFtoEMMA 1.31

19:01:10| IGNORING: P1_R6D23_R9G007_Trade_UK_CDA162024-5_ R6A/Created Tue Aug 21 155952 CEST 2007 by GDFtoEMMA 1.31

19:01:10| IGNORING: P1_R6D23_R9G007_Trade_UK_CDA162024-5_ R6A/EPOC_Trade_UK

19:01:10| IGNORING: P1_R6D23_R9G007_Trade_UK_CDA162024-5_ R6A/EPOC2

19:01:11| IGNORING: P1_R6D23_R9G007_Trade_UK_CDA162024-5_ R6A/EPOC3

19:01:11| IGNORING: P1_R6D23_R9G007_Trade_UK_CDA162024-5_ R6A/Rofs1Ext_R6D23R

19:01:24|

19:01:24| SMARTPHONE WILL BE FLASHED IN 3 PHASES!

19:01:24|

19:01:24| [---------- PHASE 1 ----------]

19:01:25|

19:01:25| Switching...

19:01:25| ENTERING FLASH MODE...

19:01:25| Master Port detected: COM7

19:01:25| Slave Port detected: COM8

19:01:25| Opening Port!

19:01:25| INIT MASTER FOR FLASH...OK!

19:01:25| PHONE INFO SAMPLED...OK!

19:01:25| EPOC FLASH APPLET HEADER SENT...OK!

19:01:25| FLASH APPLET BODY SENT...OK!

19:01:25| SHUTTING DOWN MASTER...OK!

19:01:26| RECEIVED 'AAA' FLASH BOOT!

19:01:26| GREEN LIGHT FOR SMARTPHONE FLASH!

19:01:26| Smartphone ACPU Flash Returned: OK

19:01:26|

19:01:26| [---------- PHASE 2 ----------]

19:01:26|

19:01:26| Switching...

19:01:26| ENTERING DB2000 MODE...

19:01:26| Master Port detected: COM7

19:01:26| Slave Port detected: COM8

19:01:26| Opening Port!

19:01:26| INIT MASTER...OK!

19:01:26| PHONE INFO SAMPLED...OK!

19:01:26| EPOC APPLET HEADER SENT...OK!

19:01:26| APPLET BODY SENT...OK!

19:01:26| SHUTTING DOWN MASTER...OK!

19:01:28| Baseband ID: 7100

19:01:28| Protocol Version: 3.1

19:01:28| NEW SECURITY PHONE DETECTED! SWITCHING...

19:01:29| Speed set to 460800

19:01:29|

19:01:29| Sending db2000_cid03_prodid_p3b.bin...

19:01:30| Header: Failed

19:01:30|

19:01:30| Sending db2001_cid53red_flash_r1a003.bin...

19:01:30| Binary acknowledge failed with: 00

19:01:30| Command: Error 0x00


intente con otro firmware y me aparecio lo siquiente ..tambien se traba en la 2 fase pero...ya no menciona lo de ingnorando del anterior archivo ..

18:23:02| XS++ v3.2 Dev1 (Crystal) Ready !

18:23:09| Executing SEMC Smartphone Operations!

18:23:09| Please hold boot key ('@' or 'C') and connect device...

18:23:21| Master Port detected: COM7

18:23:21| Slave Port detected: COM8

18:23:21| Opening Port!

18:23:22| INIT MASTER...OK!

18:23:22| PHONE INFO SAMPLED...OK!

18:23:22| EPOC APPLET HEADER SENT...OK!

18:23:22| APPLET BODY SENT...OK!

18:23:22| SHUTTING DOWN MASTER...OK!

18:23:24| Baseband ID: 7100

18:23:24| Protocol Version: 3.1

18:23:24| NEW SECURITY PHONE DETECTED! SWITCHING...

18:23:25| Speed set to 460800

18:23:25|

18:23:25| Sending db2000_cid03_prodid_p3b.bin...

18:23:26| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B

18:23:26| This is a PRODUCTION_ID loader

18:23:26| Activating GDFS...

18:23:26| Cannot open GDFS

18:23:26| Activating GDFS...

18:23:26| Cannot open GDFS

18:23:26| Activating GDFS...

18:23:27| Cannot open GDFS

18:23:27| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:n/a)

18:23:27| ...using IMEI name

18:23:27|

18:23:27| Profiling EPOC smartphone...

18:23:27| Platform: DB2001

18:23:27| OTP CID: 52

18:23:27| EROM CID: 53

18:23:27| EROM Color: Red

18:23:27| IMEI: 35703301xxxxxx

18:23:27| Phone ID: P1

18:23:27| Part Number: n/a

18:23:27| Phone smartphone version: R1C01

18:23:27| Phone software version:

18:23:27| Processing Unit:

18:23:27| Organizer:

18:23:27| CDA:

18:23:27| Activating GDFS...

18:23:27| Cannot open GDFS

18:23:27| Ready for operation!

18:23:39|

18:23:39| Parsing package contents...

18:23:39| SCRIPT (GDFS) file: R6D23_CDA162022_1_CCPU_EN_NoSIMLock_Generic_World1 .gdfs

18:23:39| CCPU (BABE) file: R9G007_CXC162037_CCPU_EN_MO_Red_CID53_DB2001.softw are

18:23:39| ACPU (ISP) file: 2_35_CXC162176_isp_EN_MO_Camera_Firmware.ispsoftwa re

18:23:39| CCPU (BABE) file: R2A04_CXC162175_CCPU_fs_EN_MO_Red_CID53_DB2001.sof tware

18:23:39| ACPU (ARM) file: R6D22_CDA162022_1_ACPU_EN_Generic_World1.armsoftwa re

18:23:39| ACPU (ARM) file: R6D22_CDA162022_1_ACPU_EN_ROFS2_Generic_World1.arm software

18:23:39| ACPU (ARM) file: R6D23R_CXC162108_ACPU_EN_ROFS1_EXT.armsoftware

18:23:39| ACPU (ARM) file: R6D23R_CXC162109_ACPU_EN_CoreOS.armsoftware

18:23:39| ACPU (ARM) file: R6D23R_CXC162109_ACPU_EN_ROFS1.armsoftware

18:23:43|

18:23:43| SMARTPHONE WILL BE FLASHED IN 3 PHASES!

18:23:43|

18:23:43| [---------- PHASE 1 ----------]

18:23:43|

18:23:43| Switching...

18:23:43| ENTERING FLASH MODE...

18:23:43| Master Port detected: COM7

18:23:43| Slave Port detected: COM8

18:23:43| Opening Port!

18:23:43| INIT MASTER FOR FLASH...OK!

18:23:44| PHONE INFO SAMPLED...OK!

18:23:44| EPOC FLASH APPLET HEADER SENT...OK!

18:23:44| FLASH APPLET BODY SENT...OK!

18:23:44| SHUTTING DOWN MASTER...OK!

18:23:45| RECEIVED 'AAA' FLASH BOOT!

18:23:45| GREEN LIGHT FOR SMARTPHONE FLASH!

18:23:45| Smartphone ACPU Flash Returned: OK

18:23:45|

18:23:45| [---------- PHASE 2 ----------]

18:23:45|

18:23:45| Switching...

18:23:45| ENTERING DB2000 MODE...

18:23:45| Master Port detected: COM7

18:23:45| Slave Port detected: COM8

18:23:45| Opening Port!

18:23:45| INIT MASTER...OK!

18:23:45| PHONE INFO SAMPLED...OK!

18:23:45| EPOC APPLET HEADER SENT...OK!

18:23:45| APPLET BODY SENT...OK!

18:23:45| SHUTTING DOWN MASTER...OK!

18:23:47| Baseband ID: 7100

18:23:47| Protocol Version: 3.1

18:23:47| NEW SECURITY PHONE DETECTED! SWITCHING...

18:23:48| Speed set to 460800

18:23:48|

18:23:48| Sending db2000_cid03_prodid_p3b.bin...

18:23:48| Header: Failed

18:23:48|

18:23:48| Sending db2001_cid53red_flash_r1a003.bin...

18:23:48| Binary acknowledge failed with: 00

18:23:48| Command: Error 0x00

18:24:41| Sendinging shutdown signal to phone...

18:24:43| Shutting down...

cok0nut
27/07/2010, 04:33:53
hola que tal a mi hoy precisamente me paso lo mismo tengo un p1i cid 53 db200 y segun el sx++ no lo soporta hice el flasheo con el run it y no me lo completo y despues lo hice con un firmware que me descargeu y me marca esto

‎00:52:56| XS++ v3.1 (Darwin) Ready !
00:52:56| Executed on Microsoft Windows XP
00:53:39| Executing SEMC Smartphone Operations!
00:53:39| Please hold boot key ('@' or 'C') and connect device...
00:53:50| Master Port detected: COM10
...00:53:50| Slave Port detected: COM11
00:53:50| Opening Port!
00:53:50| INIT MASTER...OK!
00:53:50| PHONE INFO SAMPLED...OK!
00:53:50| EPOC APPLET HEADER SENT...OK!
00:53:50| APPLET BODY SENT...OK!
00:53:50| SHUTTING DOWN MASTER...OK!
00:53:52| Baseband ID: 7100
00:53:52| Protocol Version: 3.1
00:53:52| NEW SECURITY PHONE DETECTED! SWITCHING...
00:53:53| Speed set to 460800
00:53:53|
00:53:53| Sending db2000_cid03_prodid_p3b.bin...
00:53:55| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
00:53:55| This is a PRODUCTION_ID loader
00:53:55| Activating GDFS...
00:53:55| Cannot open GDFS
00:53:55| Activating GDFS...
00:53:55| Cannot open GDFS
00:53:55| Activating GDFS...
00:53:55| Cannot open GDFS
00:53:55| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:n/a)
00:53:55| ...using IMEI name
00:53:55|
00:53:55| Profiling EPOC smartphone...
00:53:55| Platform: DB2001
00:53:55| OTP CID: 52
00:53:55| EROM CID: 53
00:53:55| EROM Color: Red
00:53:55| IMEI: 35703301xxxxxx
00:53:55| Phone ID: P1
00:53:55| Part Number: n/a
00:53:55| Phone smartphone version: R1C01
00:53:55| Phone software version:
00:53:55| Processing Unit:
00:53:55| Organizer:
00:53:55| CDA:
00:53:55| Activating GDFS...
00:53:55| Cannot open GDFS
00:53:55| Ready for operation!
00:54:49|
00:54:49| Parsing package contents...
00:54:49| CCPU (BABE) file: R2A04_CXC162175_CCPU_fs_EN_MO_Red_CID53_DB2001.sof tware
00:54:49| ACPU (ARM) file: R6D22_CDA162022_1_ACPU_EN_Generic_World1.armsoftwa re
00:54:49| ACPU (ARM) file: R6D22_CDA162022_1_ACPU_EN_ROFS2_Generic_World1.arm software
00:54:49| ACPU (ARM) file: R6D23R_CXC162108_ACPU_EN_ROFS1_EXT.armsoftware
00:54:49| ACPU (ARM) file: R6D23R_CXC162109_ACPU_EN_CoreOS.armsoftware
00:54:49| ACPU (ARM) file: R6D23R_CXC162109_ACPU_EN_ROFS1.armsoftware
00:54:49| SCRIPT (GDFS) file: R6D23_CDA162022_1_CCPU_EN_NoSIMLock_Generic_World1 .gdfs
00:54:49| CCPU (BABE) file: R9G007_CXC162037_CCPU_EN_MO_Red_CID53_DB2001.softw are
00:54:49| ACPU (ISP) file: 2_35_CXC162176_isp_EN_MO_Camera_Firmware.ispsoftwa re
00:55:07|
00:55:07| SMARTPHONE WILL BE FLASHED IN 3 PHASES!
00:55:07|
00:55:07| [---------- PHASE 1 ----------]
00:55:07|
00:55:07| Switching...
00:55:07| ENTERING FLASH MODE...
00:55:07| Master Port detected: COM10
00:55:07| Slave Port detected: COM11
00:55:07| Opening Port!
00:55:07| INIT MASTER FOR FLASH...OK!
00:55:07| PHONE INFO SAMPLED...OK!
00:55:07| EPOC FLASH APPLET HEADER SENT...OK!
00:55:07| FLASH APPLET BODY SENT...OK!
00:55:07| SHUTTING DOWN MASTER...OK!
00:55:08| RECEIVED 'AAA' FLASH BOOT!
00:55:08| GREEN LIGHT FOR SMARTPHONE FLASH!
00:55:08| Smartphone ACPU Flash Returned: OK
00:55:08|
00:55:08| [---------- PHASE 2 ----------]
00:55:08|
00:55:08| Switching...
00:55:08| ENTERING DB2000 MODE...
00:55:08| Master Port detected: COM10
00:55:08| Slave Port detected: COM11
00:55:08| Opening Port!
00:55:08| INIT MASTER...OK!
00:55:08| PHONE INFO SAMPLED...OK!
00:55:08| EPOC APPLET HEADER SENT...OK!
00:55:08| APPLET BODY SENT...OK!
00:55:08| SHUTTING DOWN MASTER...OK!
00:55:10| Baseband ID: 7100
00:55:10| Protocol Version: 3.1
00:55:10| NEW SECURITY PHONE DETECTED! SWITCHING...
00:55:11| Speed set to 460800
00:55:11|
00:55:11| Sending db2000_cid03_prodid_p3b.bin...
00:55:13| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
00:55:13| This is a PRODUCTION_ID loader
00:55:13|
00:55:13| Sending db2001_cid53red_flash_r1a003.bin...
00:55:14| Applet ID: 060524 0930 LIECXC1325414_DB2000_FLASHLOADER_R1A003
00:55:14| This is a FLASH loader
00:55:14| Flashing R2A04_CXC162175_CCPU_fs_EN_MO_Red_CID53_DB2001.sof tware
00:55:14| Header type: Unknown/damaged



y ya de ahi no avanza no se que solucion me podrian dar si es que tiene solucion mi equipo
ando bn desesperano no se que hacer ayuda porfavooor

isthecrow
30/07/2010, 00:06:46
ai ta la solucion: Solucion para Revivir P1i por mal Flasheo. (http://www.topsony.com/forum_es/uiq3-f187/solucion-para-revivir-p1i-por-mal-flasheo-t125001.html)