Results 1 to 10 of 192

Threaded View

  1. #1
    Banned
    Join Date
    May 2007
    Device
    c702 (speed black) & s700
    Posts
    597
    Thanks
    34
    Thanked 272 Times in 111 Posts

    Exclamation SeTool2 Lite 1.11

    v 1.10 OBSOLETE

    - added alternative security bypass for cid52 DB2020 phones.
    it was stolen and released for free by den_po, so why not add it now to setool2 lite ?

    - now you CAN: readout files, use cross-cid flash, and apply .VKP for db2020 cid52 phones.

    IMPORTANT INSTRUCTIONS:
    CHARGE BATTERY FULLY !!!
    select any db2020 model
    press identify, note yours firmware version
    get that firmware and add it to firmware area with "add" button
    check "Bypass DB2020 security"
    add text file with setool2 script command or .VKP script
    press flash.
    when asked, disconnect phone, remove battery, press "READY" in setool2, and attach phone.

    i STRONGLY recommend use LATEST usbflash drivers (included in distributive) and use ONLY dcu60 for cid52 bypass.
    (because with dcu60 time for security bypass is ~10 minutes, but with COM cable it is ~25 minutes)

    note.
    because way of security bypassing, entire "main" area damaged, so you should combine .VKP patches in one file...
    (if you NOT using quick access patch)

    note.
    because way of security bypassing, entire "main" area damaged, so you should combine .VKP patches in one file...

    HAPPY NEW YEAR.

    DOWNLOAD
    Setool2Lite_v1.10

    Small update to 1.10
    1.11 CURRENT
    - added support for "quick access" patch, which allows quick security bypass and enables flash reading.
    to use - generate quick access .VKP, write it in phone using "bypass DB2020 security" via "standart long way"
    after .VKP is written - check "use quick access patch" and enjoy fast security bypass.
    "fast patch" idea and qamaker is property of den_po,used without permission.

    ps.
    IF YOU NOT WROTE MAIN FILE DURING SECURITY BYPASS - YOU WILL GET "DEAD" PHONE.
    IN THAT CASE - SIMPLE REFLASH SITUABLE MAIN FIRMWARE WITHOUT ANY MARKED "BYPASS DB2020 SECURITY","USE QUICK ACCESS".

    Download:
    Setool2Lite_v1.10_update_to_v1.11


    short help.

    first, you must select interface.
    USB is dcu60.
    UFS is nothing.
    COMx - comport (you should use ftdi-based service cable to achieve speeds more that 115200)

    then select phone model.
    it is important.

    then press desired operation.

    "identify" will show phone information, lock state and usercode.
    also, identify will show if you have REST file for your phone.

    "read gdfs" will read gdfs from phone in BINARY format.
    ALWAYS BACKUP YOURS GDFS AND KEEP BACKUP IN SAFE PLACE
    "write gdfs" will write gdfs to phone in BINARY format
    file, selected in "misc. edit" will be assumed as gdfs in binary format.

    "read flash" will read flash.
    start and len of readed area must be filled in "read setup".
    if you want to produce "flasheable" readout, check "read SSW" checkbox.
    IT IS NOT WORKING WITH DB2020 PHONES

    "flash" will flash phone firmware with possible package uploading.
    notes:
    if anything selected in "firmware upgrade pack" edit, attempt to handle it as SFA file will be made during flash.
    if anything selected in "misc. edit", attempt to handle it as package (.zip) will me made during flash.
    if anything selected in "restore file" edit, it will be assumed as "firmware restore" file.

    "write script"
    is most powerful and usable tool for users.

    first, it can process .vkp script files.
    just select "anyfile.vkp" in "misc. edit" and press write script.
    .VKP supported for DB2020 phones only with "Bypass DB2020 Security" checked + FLASH operation

    If you like setool2 lite, take time to check setool.net site - perhaps you will like features of FULL version.
    Last edited by miguel8e; 06-18-2008 at 08:10 PM.

  2. The Following 24 Users Say Thank You to ts014 For This Useful Post:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •