SuperFunction v5.5 by Strong super camera for k750/w800/w810

[tsitsigala]

SuperFunction v5.5 by Strong some codes from Raiderski's(supermode). Thanks to Raiderski mod on Kriomag's 21.91
optimized for the W800-k750.. also works with W810 [CID 36 - CID 49].

COPY camdriver0.dat FILE TO IFS/SETTINGS/CAMERA
--------------------------------------------------------------------------------------------
HOW TO USE SuperFunction:

SuperFunction automatic always on.
Works in normal and fine mode.
Fine mode=improved Fine mode-enchanced ON.
Normal mode=Improved Fine mode-enchanced OFF(there is no Normal mode).

Set the EV setting using joystick then
use the Zoom keys to change the value.
You can see the changes in the viewfinder preview.

Also you can use the SuperFunction driver as simply driver.

-2.0: scene (1.1 Portrait-1.2 Landscape-1.3 Twilight Portrait-1.4 Twilight Landscape- 1.5 Sports-1.6 Beach/Snow-1.7Document)

-1.7: SPOT photometry (1.0 off 1.1 on)

-1.3: EFFECTS(black & white,solarize,negative,sepia)

-1.0: ZOOM

-0.7: BRIGHTNESS

-0.3: NORMAL WHITE BALANCE

0.0: FOCUS (1.0 is auto,1.1 infinite / 1.2 half press shuter manual focus 1.3-4.0 )

+0.3: EXPOSURE(decrease/increase 1.1- 2.0 Normal -3.5)

+0.7: SHUTTER SPEED(1.1-4.0 increase/ decrease speed viewfinder preview)

+1.0: SATURATION manual (1.1 default 1.2-4.0 decrease/increase)

+1.3: WHITE BALANCE BLUE(1.1-4.0 add blue)

+1.7: WHITE BALANCE WELLOW(1.1-4.0 add yellow)

+2.0: WHITE BALANCE GREEN-RED(1.1-2.5 add green 2.5-4.0 add red)


The driver has manualy lock/unlock exposure
is usefully when takes photos indoors and some outdoors to avoid high overexprosure
works only in infinite mode (EV 0.0 +/- zoom 1.1)move the camera to get the desired light press half shot and hold it to lock exprosure then move the camera to the object and take the photo.

The driver has customize fanctions if you want
open the camdriver0.dat with notepad and see the
first codes if you wish can change the default
SHARPNESS-SATURATION-BRIGHTNESS-CONTRAST-EXPOSURE-SHUTTER SPEED(for led only)-NORMAL SPEED
and ENCHANCED NIGHT SPEED.

ALSO YOU CAN ADD OR REMOVE OR CHANGE
POSITION FUNCTIONS IN CUSTOMIZE FUNCTIONS MENU
in camdriver0.dat
(There is manualISO-Contrast-Bilinear Filtre).

TIPS:
For Nightsthots better use manual Speed Shot is faster than Nightmode.

In good daylight outdoor shots use Normal mode.

In low Light conditions and indoors shots use Enchanced mode.

Always use manual White Balance function for better results.


Good Luck to ALL!!!!!!!!!!!!!!!!
Strong

[Neznam]

It would be nice to show some photo with your driver and with some other ;)

[commando]

Any bugs associated with the driver
..............

[hollytom]

guys i have the few question as i am not well aware with camdrivers

what is SPOT photometry
SHUTTER SPEED
how to activate Enchanced mode
and also i dont get this point "There is manualISO-Contrast-Bilinear Filtre"
what changes can be made if i use less ISO values
and what is Bilinear Filtre

[sekal]

Is it possible to ON/OFF this driver? In normal auto focus mode,I was not able to take sharp pics. It would be better to have normal driver along with this enhanced one.

[tsitsigala]

@sekal
I am sure the macro it has on thats you get blur photo
@hollytom
The spot photometry is used in digital cameras to measure the light level of a certain object in the picture and adjust the camera's white balance to match the light aimed on the subject.
MANUAL SHUTTER SPEED adjust how fast camera take photos
Enchanced mode is active in fine mode
the lower ISO is 100 at k750/w800 and 80 at w810 lower ISO= less noise
Bilinear Filtre look here Bilinear filtering - Wikipedia, the free encyclopedia

About customize open camdriver0.dat find CUSTOMIZE FUNCTIONS MENU in this menu you can change the positions of functions(read info.txt) below first is by default and second I change randomly position for functions you can do this easy(I change the focus to -1.0 and zoom to 0.0 and manual saturation to -0.7 and brightness
to + 1.0)

first

// CUSTOMIZE FUNCTIONS MENU

EV_M_20= #SM_SCENE;
EV_M_17= #SM_SPOT;
EV_M_13= #SM_EFFECT;
EV_M_10= #SET_SM_ZOOM;
EV_M_07= #SM_BRIGHTNESS;
EV_M_03= #SM_EV; (is the default EV +/- joy more/less light)
EV_0_00= #CHANGE_FOCUS;
EV_P_03= #SM_EXPOSURE;
EV_P_07= #SM_CHANGE_SSPEED;
EV_P_10= #SM_SATUR;
EV_P_13= #CC_BLUE;
EV_P_17= #CC_YELLOW;
EV_P_20= #SM_CC_GREEN_RED;

second
// CUSTOMIZE FUNCTIONS MENU

EV_M_20= #SM_SCENE;
EV_M_17= #SM_SPOT;
EV_M_13= #SM_EFFECT;
EV_M_10= #CHANGE_FOCUS;
EV_M_07= #SM_SATUR;
EV_M_03= #SM_EV;
EV_0_00= #SET_SM_ZOOM;
EV_P_03= #SM_EXPOSURE;
EV_P_07= #SM_CHANGE_SSPEED;
EV_P_10= #SM_BRIGHTNESS;
EV_P_13= #CC_BLUE;
EV_P_17= #CC_YELLOW;
EV_P_20= #SM_CC_GREEN_RED;

It is only copy past I hope to help you.
Strong

samles
ImageShack - Hosting :: 2007092210022pt9.jpg
ImageShack - Hosting :: 2007092210043ix6.jpg
ImageShack - Hosting :: 2007092210061xc2.jpg
ImageShack - Hosting :: 2007092210073hh8.jpg
ImageShack - Hosting :: 2007092210081nm3.jpg
ImageShack - Hosting :: 2007092210091il2.jpg
ImageShack - Hosting :: 2007092210111px9.jpg
ImageShack - Hosting :: 2007092215142mz6.jpg

[coolredkap]

Can I install this on my W700i ?

[chicharon]

SuperFunction v5.5 by Strong some codes from Raiderski's(supermode). Thanks to Raiderski mod on Kriomag's 21.91
optimized for the W800-k750.. also works with W810 [CID 36 - CID 49].

COPY camdriver0.dat FILE TO IFS/SETTINGS/CAMERA

sorry, newbie here.

how do i install a driver?

[tsitsigala]

@ [chicharon]
use Far Manager with SEFP plugin if you have cid 36 or Phone-XS or Setool2lite if you have cid 49/50

[glen]

guys, i strongly recommend this driver. it takes awesome pics. the "colour recognition" of this driver is best. i am using this one now.
good work strong. keep it up....