configuration error??

[tuko]

alight i m a newbie at this and i just flash my phone with the files i randomly dled.

before i flashed i just upload some files to my phone and got a WSOD.

Now after i flash i got this message: configuration error , please contact your network operator or service center.

Is there a way to fix this?

[mahcin]

configuration error - try U customize , must be OK :D

[Splinter_C]

Customize the FS and you will be OK. :)

[Gump]

Need to "finalize" or "complete phone" !

BR

Gump

[tuko]

ok i used the XS++ and flash the phone with W810_R4EK001_MAIN_GENERIC_HN_RED49 as main and W810_R4EK001_FS_AMERICA_2_RED49 as FS. But at the customize file system's BreakXS and FastXS alway boot up the wrong CID and when in BruteXS never get the work done. It jumping from "Sending loaders\db2010_cid49red_cs_r5a.bin..." to Read otp and connect and disconnect the phone itself. is there another way to "finalize" or customize the FS w/o using FAR or XS++? because my FAR never functional. Thankz

[Gump]

Use SETool lite, flash cda !

[Haghdadi]

You have to Finalize your phone

[seediq]

just flash my K810i, using xs++ using K810_R6BC002_FS_S_ASIA_LEVAN_RED52.fbn and K810_R6BC002_MAIN_GENERIC_SM_RED52.mbn, return same result.

anyone have solution for this?

before:

07:52:35| PORT STATUS: ACTIVE
07:52:36| Baseband ID: 9900
07:52:36| Hardware Platform: db2020
07:52:36| Protocol Version: 3.1
07:52:36| AutoReturnCollectingWarning: IMEI name does not match GDFS name (IMEI:NULL GDFS:K810)
07:52:36| ...using GDFS name
07:52:36| Return
07:52:36| PHONE INFO
07:52:36| DBID: db2020
07:52:36| OTP CID: 51
07:52:36| EROM CID: 52
07:52:36| EROM color: Red
07:52:36| IMEI: 35612701xxxxxx
07:52:36| Phone: K810
07:52:36| Operator: APAC
07:52:36| CDA: CDA102568/101   R8A
07:52:36| Firmware: R6BC002
07:52:36| EROM: R3A022
07:52:36| 
07:52:36| Ready for operation!
08:05:06| You must choose a way in!Error: FSX failed.
08:05:06| ++ Error: FSX failed
08:05:08| Disconnected... Unplug the phone
08:05:15| Attempting to open the interface...

after:

22:02:49| Baseband ID: 9900
22:02:49| Hardware Platform: db2020
22:02:49| Protocol Version: 3.1
22:02:50| Phone name detected!
22:02:50| 
22:02:50| Profiling SEMC phone...
22:02:50| Baseband ID: db2020
22:02:50| OTP CID: 49
22:02:50| EROM CID: 52
22:02:50| EROM Color: Red
22:02:50| IMEI: 35399601xxxxxx
22:02:50| Phone ID: K800
22:02:50| Network: S_ASIA_LEVAN
22:02:50| CDA: CDA102511/132   R6A
22:02:50| Firmware Version: R1JC002
22:02:50| EROM: R3A016
22:02:50| 
22:02:50| Ready for operation!
22:03:55| Sending loaders\db2020_cid01_cert_p3g.bin...
22:03:55| This is a CERTIFICATE loader
22:03:55| ***** Read flash vendor & id (cmd 0D)
22:03:55| ***** Read otp (cmd 24)
22:03:55| Sending loaders\db2020_cid52red_flash_r2a005.bin...
22:03:55| This is a FLASH loader
22:03:55| ***** Read flash vendor & id (cmd 0D)
22:03:55| ***** Read otp (cmd 24)
22:03:55| +++ Now flashing firmware main...
22:03:56| Sending flashfile E:\XS++_v1.6.5_beta\K810_R6BC002_MAIN_GENERIC_SM_RED52.mbn
22:03:56| 460 flashblocks
22:07:44| Finishing flash
22:07:44| Done flashing
22:07:44| ++ Flashing was successful
22:07:46| Disconnected... Unplug the phone

[seediq]

Use SETool lite, flash cda !

how to flash cda? the function is locked :confused:

[seediq]

now i know what the reason is, you have to select your CDA correctly! now back to customize my K810i back ^_^