Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Member
    Join Date
    Apr 2009
    Device
    -
    Posts
    32
    Thanks
    12
    Thanked 0 Times in 0 Posts

    Updated gone wrong

    OK Well I updated my Sony Ericsson K800i and installed a new patch because it was not working properly. I used the Sony Ericsson PC suite for this. But now I inserted my 02 sim in and it says "Insert Correct sim card" I had it unlocked before and payed £25 for someone to do it. Now what can I do to unlock it again I don't wanna` pay again.

    Thanks

  2. #2
    Advanced user george26br's Avatar
    Join Date
    Dec 2009
    Device
    -w880
    Posts
    118
    Thanks
    2
    Thanked 12 Times in 11 Posts

    Re: Updated gone wrong

    use omnius. ( Home | Omnius )
    your phone was unlocked via patch.
    and after the update you did your phone got locked again.

  3. The Following User Says Thank You to george26br For This Useful Post:


  4. #3
    Expert hyperion17's Avatar
    Join Date
    Mar 2008
    Device
    K800
    Posts
    987
    Thanks
    12
    Thanked 158 Times in 155 Posts

    Re: Updated gone wrong

    Quote Originally Posted by george26br View Post
    use omnius. ( Home | Omnius )
    your phone was unlocked via patch.
    and after the update you did your phone got locked again.
    And make sure you downgrade to CID52.

  5. The Following User Says Thank You to hyperion17 For This Useful Post:


  6. #4
    Member
    Join Date
    Apr 2009
    Device
    -
    Posts
    32
    Thanks
    12
    Thanked 0 Times in 0 Posts

    Re: Updated gone wrong

    oh Well I messed it all up now by screwing with it wont even turn on now lol. I think it totally gone corrupt I tried to repair it via Sony actually software and it failed ouch!

  7. #5
    Expert hyperion17's Avatar
    Join Date
    Mar 2008
    Device
    K800
    Posts
    987
    Thanks
    12
    Thanked 158 Times in 155 Posts

    Re: Updated gone wrong

    Unlock and downgrade to CID52 with OMNIUS, then reflash with CID52 firmware, using Setool2Lite or XS++3.1.

  8. The Following User Says Thank You to hyperion17 For This Useful Post:


  9. #6
    Member
    Join Date
    Apr 2009
    Device
    -
    Posts
    32
    Thanks
    12
    Thanked 0 Times in 0 Posts

    Re: Updated gone wrong

    I get an error plus I do not know how to downgrade here is the error:

    Code:
    Action journal
    21:55:23   Unlock network lock by reset
    21:55:23   Unlocks the phone network lock by reset (up to OTP CID 53).
    21:55:23   Operating system: Microsoft Windows Vista Home Premium Edition Service Pack 2 (build 6002), 32-bit
    21:55:24   Application version: 0.04.2151 (beta)
    21:55:24 . The action name is 'Unlock'
    21:55:24   Selected phone type: K800
    21:55:24   Selected connection method: USB ROM
    21:55:24 i Instructions
    21:55:24 i 1. Make sure the phone battery is charged to at least 50%.
    21:55:24 i 2. Switch off the phone!
    21:55:24 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
    21:55:24 i 4. Press and hold buttons 2 and 5, then connect the cable to the phone!
    21:55:24 . The action started waiting for the user
    21:56:17 . The action finished waiting for the user
    21:56:17   Connecting via Generic EMP USB Flash Device (USB1)...
    21:56:17   Device driver version: 2.2.0.5
    21:56:17   Entering baseband CPU service mode...
    21:56:17   Detected chipset: DB2020 '9900
    21:56:17   Boot mode: ROM
    21:56:17   Sending loader...
    21:56:18   Flash chip manufacturer: Intel®
    21:56:18   Flash chip ID: 897E
    21:56:18   IMEI: 359088***********
    21:56:18   OTP CID: 51
    21:56:18   OTP area status: Locked
    21:56:18   Product type: Retail
    21:56:18   Effective CID: 53
    21:56:18   Effective color: Red
    21:56:18 e Check server settings or smartcard presence.
    21:56:18 e Failed!
    21:56:18 . The action entered shutdown phase
    21:56:18 . The action reported failure
    
    Error code
    # 7328AB4254495B30
    
    Error details
    ---
    47 B0 3D 25 14 62 30 F1 B6 7F 34 16 0E 7D A8 A5 
    8F 83 6A CA 2A 2D E0 55 7B 26 92 54 CC 2A 68 07 
    DE 59 4C 85 66 FD 10 AF 6A 11 FA 0E D2 E5 78 A7 
    4E 78 5C CB F6 CD 08 98 54 4D 64 F3 42 45 88 A7 
    BE B3 76 9B 40 26 
    ---

  10. #7
    Top Team Gold senter's Avatar
    Join Date
    Nov 2007
    Device
    W705
    Posts
    1,958
    Thanks
    2
    Thanked 344 Times in 283 Posts

    Re: Updated gone wrong

    Quote Originally Posted by itisfalse View Post
    I get an error plus I do not know how to downgrade here is the error:

    ....
    21:56:18 e Check server settings or smartcard presence.
    21:56:18 e Failed!
    21:56:18 . The action entered shutdown phase
    21:56:18 . The action reported failure

    ---
    [/code]
    You must resend activation from www.cruiserlog.net and then activate your account from email !

  11. #8
    Member
    Join Date
    Apr 2009
    Device
    -
    Posts
    32
    Thanks
    12
    Thanked 0 Times in 0 Posts

    Re: Updated gone wrong

    Yes sorry its done but phone wont still come on here is code for done:
    I do not know how to downgrade

    Code:
    Action journal
    22:06:59   Unlock network lock by reset
    22:06:59   Unlocks the phone network lock by reset (up to OTP CID 53).
    22:06:59   Operating system: Microsoft Windows Vista Home Premium Edition Service Pack 2 (build 6002), 32-bit
    22:06:59   Application version: 0.04.2151 (beta)
    22:06:59 . The action name is 'Unlock'
    22:06:59   Selected phone type: K800
    22:06:59   Selected connection method: USB ROM
    22:06:59 i Instructions
    22:06:59 i 1. Make sure the phone battery is charged to at least 50%.
    22:06:59 i 2. Switch off the phone!
    22:06:59 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
    22:06:59 i 4. Press and hold buttons 2 and 5, then connect the cable to the phone!
    22:06:59 . The action started waiting for the user
    22:07:17 . The action finished waiting for the user
    22:07:17   Connecting via Generic EMP USB Flash Device (USB1)...
    22:07:17   Device driver version: 2.2.0.5
    22:07:17   Entering baseband CPU service mode...
    22:07:17   Detected chipset: DB2020 '9900
    22:07:17   Boot mode: ROM
    22:07:17   Sending loader...
    22:07:17   Flash chip manufacturer: Intel®
    22:07:17   Flash chip ID: 897E
    22:07:17   IMEI: 35908801644880
    22:07:17   OTP CID: 51
    22:07:17   OTP area status: Locked
    22:07:18   Product type: Retail
    22:07:18   Effective CID: 53
    22:07:18   Effective color: Red
    22:07:18   Restarting the phone...
    22:07:20 i Instructions
    22:07:20 i 1. Make sure the phone battery is charged to at least 50%.
    22:07:20 i 2. Switch off the phone!
    22:07:20 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
    22:07:20 i 4. Press and hold buttons 2 and 5, then connect the cable to the phone!
    22:07:44   Connecting via Generic EMP USB Flash Device (USB1)...
    22:07:44   Device driver version: 2.2.0.5
    22:07:44   Entering baseband CPU service mode...
    22:07:44   Detected chipset: DB2020 '9900
    22:07:44   Boot mode: ROM
    22:07:44   Sending loader...
    22:07:44   Establishing connection to the server...
    22:07:48   Receiving news...
    22:07:50 i No news
    22:07:50   Actual credit: 0.00
    22:07:58   Actual credit: 0.00
    22:07:59   Effective color: Brown
    22:07:59   Effective CID: 49
    22:07:59   Restarting the phone...
    22:08:01 i Instructions
    22:08:01 i 1. Make sure the phone battery is charged to at least 50%.
    22:08:01 i 2. Switch off the phone!
    22:08:01 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
    22:08:01 i 4. Press and hold buttons 2 and 5, then connect the cable to the phone!
    22:08:32   Connecting via Generic EMP USB Flash Device (USB1)...
    22:08:32   Device driver version: 2.2.0.5
    22:08:32   Entering baseband CPU service mode...
    22:08:32   Detected chipset: DB2020 '9900
    22:08:32   Boot mode: ROM
    22:08:32   Sending loader...
    22:08:35   Code NCK for relock: 3609800152646015
    22:08:35   Code NSCK for relock: 7259365912038351
    22:08:35   Code SPCK for relock: 2075078455203598
    22:08:35   Code CCK for relock: 9481006839935257
    22:08:35   Code PCK for relock: 6391030892793745
    22:08:35   Code ESLCK for relock: 4358109632651873
    22:08:35   Code NCK for unlock: 8211176055579581
    22:08:35   Code NSCK for unlock: 6397612426097917
    22:08:35   Code SPCK for unlock: 9746204248508491
    22:08:35   Code CCK for unlock: 8843521452141232
    22:08:35   Code PCK for unlock: 0937233765193683
    22:08:35   Code ESLCK for unlock: 7172361590031960
    22:08:35   Writing flash...
    22:08:37   Effective color: Red
    22:08:37   Effective CID: 53
    22:08:37   Turning off the phone...
    22:08:39 i Please disconnect battery and cable from the phone!
    22:08:39 s Successfully done.
    22:08:39 . The action entered shutdown phase
    22:08:39 . The action reported success
    
    Additional details
    ---
    36 21 65 A0 8F 67 C1 3C 2D 10 6B E8 87 5E D7 34 
    FB 1A D3 3D D1 EA 6F DA 23 AF 65 08 29 32 F1 43 
    1B DA 4D 80 81 74 61 1C 73 C6 2F 88 1F 85 
    ---

  12. #9
    Member
    Join Date
    Apr 2009
    Device
    -
    Posts
    32
    Thanks
    12
    Thanked 0 Times in 0 Posts

    Re: Updated gone wrong

    OK I managed to do that now found out. I have downloaded K800_R8BF003_FS_EUROPE_2_RED52 I will flash phone and let you know how it goes thanks

  13. #10
    Expert hyperion17's Avatar
    Join Date
    Mar 2008
    Device
    K800
    Posts
    987
    Thanks
    12
    Thanked 158 Times in 155 Posts

    Re: Updated gone wrong

    I think you didn't choose CID52 :

    Do it again properly.
    After this you must flash MAIN and FS with CID52 and customize .
    Last edited by hyperion17; 06-13-2010 at 06:26 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •