w850i successfully unsuccessfull

[thisisamar]

Hey Guys

I am a new techbee so ignore my details. Here is a puzzle. I read for 3 days continuosly before i flashed this w850i. I had the same bloody white screen and those red lights blinking up.

After going through hundreds of threads, I realised noone is sure where the problem is. Half believes that this could be Hardware trouble, but I already brought it back from the repair man who checked it properly and tried the new pcb board and lcd screen but in vain. So I BELIEVED THE OTHER HALVES (SOFTWARE TROUBLE). Decided to give it a full go.

Before going any further, let me say this.

1. XS++ (any version) didnt work for me.

Baseband ID: 9900
Protocol Version: 3.1........... That is all what it could tell me.

2. SEUS couldnt recognise the phone.. """IDENTIFICATION FAILED......"""""

3. I am in Australia and use this phone here but it was actually bought in India. Why I said that is because most of the users wont be happy to see the Custom pack, FS and MAIN I used. I tried to be reasonable but couldnt get more than two or three files of each for this model.
MAIN-----------------W850_R1KG001_MAIN_GENERIC_CY_RED52.mbn
FS-------------------W850_R1KG001_FS_C_ASIA_RED52.fbn
CUSTOM PACK--------W850_CDA102568_7_R5A_GENERIC_C_ASIA.zip

4. I think there was a trouble writing Custom pack. I will highlight that part.

Well I am done... here is the log..

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101207673 CERT:N/A
FLASH CID:52 COLOR:RED

Model:W850i
Brand:Sony Ericsson
MAPP CXC article: R1KG001 prgCXC1250204_CHINA_CY
MAPP CXC version: R1KG001
Language Package:APAC
CDA article: CDA102568/101
CDA version: R5A
Default article: cxc1250489
Default version: R1KG001

Operator: 000-00

Elapsed:6 secs.
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101207673 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
stated number of vars:1831
Found:533 variables
Found:749 variables
Found:485 variables
Found:64 variables
GDFS read all done, GDFS_35240101207673.BIN written
Phone detached
Elapsed:32 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

CDA:CDA102568/7
MODEL:W850i
VARIANT:C_ASIA
LANGUAGE: EN
LANGUAGE: AR
LANGUAGE: RU
LANGUAGE: TR
LANGUAGE: UK

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101207673 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing \\Hers\e\Desktop (This is Active Desktop folder)\Sony Ericsson\W850i flash files\W850_R1KG001_MAIN_GENERIC_CY_RED52\W850_R1KG 001_MAIN_GENERIC_CY_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing \\Hers\e\Desktop (This is Active Desktop folder)\Sony Ericsson\W850i flash files\W850_R1KG001_FS_C_ASIA_RED52\W850_R1KG001_FS _C_ASIA_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:4740
Will flash 237 blocks...
SSW loading returns:0
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader filesystem startup: executed
loader GDFS startup: executed
Writing package...
chdir: 2
Directory not found, attempt to create
chdir: 2
chdir: 2
chdir: 2
Directory: W850_CDA102568_7_R5A_GENERIC_C_ASIA/tpa/preset/custom/
CONTENT_DOWNLOAD_HOOK.itm (10240)
Customize.xml (1082)
FM_PICTURES_HOOK_3.itm (10240)
FM_SOUNDS_HOOK_3.itm (10240)
FM_THEMES_HOOK_3.itm (10240)
FM_VIDEOS_HOOK_3.itm (10240)
GAMES_HOOK_3.itm (10240)
MEDIA_PLAYER_HOOK_3.itm (10240)
ORG_APPLICATIONS_HOOK_3.itm (10240)
preloaded_config.xml (99012)
SETT_RINGTONE_HOOK_1.itm (10240)
SETT_SCREENSAVER_HOOK_1.itm (10240)
SETT_STARTSHOW_HOOK_1.itm (10240)
SETT_WALLPAPER_HOOK_1.itm (10240)
VIDEO_PLAYER_HOOK_1.itm (10240)
Phone detached
Elapsed:407 secs.


If you think I have done something wrong, plz advice me how to correct it (if possible in detail).....

Thanks ;)






JUST ADDING FEW MORE BITS..

SETOOL recognises my phone as K700 now not W850i anymore... I must have used the wrong flash files... Can someone help me with the right ones plz....


At Akshays Webspace, i read that this could be EROM trouble. As per suggestion, I clicked on UNLOCK/REPAIR button at SETOOL.... Following is the log but end of the day the story is ..... UNSUCCESSFULL


Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101207673 CERT:N/A
FLASH CID:52 COLOR:RED

Model:K700
MAPP CXC article: R1KG001 prgCXC1250200_GENERIC_CY
MAPP CXC version: R1KG001
Language Package:APAC
CDA article: CDA102568/101
CDA version: R5A
Default article: cxc1250489
Default version: R1KG001

Operator: 000-00

Elapsed:6 secs.
Elapsed:6 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101207673 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
USERCODE reset to 0000
Elapsed:28 secs.

[jsg1994]

Mate you might want to remove your IMEI number from there

[philzfog]

Model:K700
change flexi ribbon or top key pad it is a hardwere fault when it shows as a k700

[thisisamar]

Model:K700
change flexi ribbon or top key pad it is a hardwere fault when it shows as a k700

Hi Philzfog, I dont mind it accepting an unusual trouble but this recognition trouble wasnt there before I flashed... It recognised it K700 after flashing only..

Plz reply

[philzfog]

pm me ur msn and i will see what i can do but i do think it is the flexi ribbon though from the pcb to the lcd

[c-scaff]

I also had a K800i which was showing up as a K700 while it had the white screen but once the main,fs and custom pack had been successfully flashed and the phone was fully functional again it showed back up as a K800i.

It might be worth trying to reflash it again using a different software version to see if it makes a difference.

[thisisamar]

Hi c-scaff.. even I want to flash again but I want to get the right files for FS, Main and Custom.... I am waiting if someone can get me the exact ones.. Phone was bought in India but I had been using it in Australia for the last 2 yrs.

Thanks for the hope everyone..

[c-scaff]

Hi thisisamar, the files you are using seem fine but instead of using R1KG001 try using different main and fs files like R1KC001_RED52 and also make sure the connections on your phone and the cable are clean and making a good contact and that your battery is fully charged before flashing the phone.

[thisisamar]

Hi thisisamar, the files you are using seem fine but instead of using R1KG001 try using different main and fs files like R1KC001_RED52 and also make sure the connections on your phone and the cable are clean and making a good contact and that your battery is fully charged before flashing the phone.

Thanks but wont this affect the phone... I mean that would be the different FS and MAIN.. but i can try this... Can you help me with the exact MAIN,FS and Custom Pack.. sorry if this bothers a lot.

Thanks folks:rolleyes:

[thisisamar]

The battery wasnt fully charged.. Indeed it must not be more than 20% charged when i flashed but still I went ahead because I knew that its enough to take the whole flashing process.. Is there any other reason why it must be fully charged apart from the concern that it may die during flashing