Remove SIM-lock patch generator

[khli2001]

i saw somthing important

"i STRONGLY recommend use LATEST usbflash drivers (included in distributive) and use ONLY dcu60 for cid52 bypass."

my phone is cid 51 how can i upgrade

[norberto_]

i saw somthing important

"i STRONGLY recommend use LATEST usbflash drivers (included in distributive) and use ONLY dcu60 for cid52 bypass."

my phone is cid 51 how can i upgrade

Upgrade to CID52:
Use Phone XS++ 3.1 (darvin)
Instructions:

1. Launch Phone XS++ 3.1 (Darvin)
2. Press Connect Button
3. HOld "C" button on the phone and connect the phone
4. If the phone is not CDI52 the Phone XS++ will ask you to upgrade it.
Would like XS++ to update your EROM CID to 52?
*Please note - This can be undone!* --> press Yes button.
5. Wait until the procedure finish.


WBR. Norberto_

[mohdumer]

Please Can Anyone Brief About What This SIM-Lock Patch Does - I Mean What This Patch Exactly Changes In Your Phone. By Its Name Looks Somewhat Related To Unlocking.

[norberto_]

I don't know exactly the firmware and the GDFS of these phones, but the point is:

In the main FW is a routine what check the locks in gdfs. with the patch you can modify the simlock checking routine. After the patch the routine doesn't check the locks in gdfs.

If i'm wrong please tell me.

[khli2001]

Upgrade to CID52:
Use Phone XS++ 3.1 (darvin)
Instructions:

1. Launch Phone XS++ 3.1 (Darvin)
2. Press Connect Button
3. HOld "C" button on the phone and connect the phone
4. If the phone is not CDI52 the Phone XS++ will ask you to upgrade it.
Would like XS++ to update your EROM CID to 52?
*Please note - This can be undone!* --> press Yes button.
5. Wait until the procedure finish.


WBR. Norberto_

after is done the phone still cid 51 nothing change

[dingh]

@mohdumer
This software create a patch to unlock SIM Lock. You know some people buy branded phone and the phone is locked to the BRAND SIM card like T-Mobile or Vodafone BRAND. This patch generator software will create a patch to open the SIM lock so can use with other SIM card.

[rtmsz25]

Okay, so I've updated to SETOOL2LITE v1.11, I have also created the simlock patch. When I try to apply the patch I always end up with this error: Block @ $44600000 read error. Have only: 00000000 bytes

Can anyone help me?

P.S. - I'm using a k790a

[norberto_]

after is done the phone still cid 51 nothing change

Please post the LOG from the Phone XS++! So we can see if there is a problem.

[khli2001]

i just update my phone with update serves
now is cid 52 but the fireware change is well

can any one make a R6BC002 hong kong 52 for me please

[manjak]

Hmm it seems that I have a big problem. Like I said before, everytime I try to apply patch setool gives me message "some patch values differs" and after that my phone (k550i) is dead. I tried with R8BA024, R6BC002, I even flashed my phone to w610i and then tried to patch it with w610i patch but it was the same. What is more, I tried to apply a quick access patch (on a clean firmware) and setool gave mi that fu:mad: message again... :( Is there something wrong with my phone or am I doing something wrong? I followed your instructions carefully... Please help.