Hello everybody, can i install Android firmware that i download from this forum to my PC? I was downloaded Firmware for XPERIA X10 Mini. :)
Thanks before.
Hello everybody, can i install Android firmware that i download from this forum to my PC? I was downloaded Firmware for XPERIA X10 Mini. :)
Thanks before.
I think it is not possible. Its for mobile phones not for desktops
i know how you can install android firemare to your computer if you have nexus 4 because i have nexus 4 so this notes will be help you to update android firemare to your computer
just read it carefully
Important: This method will install or update the kernel (boot.img), bootloader, radio, system image of the new Android 4.3 Jelly Bean JWR66V firmware for Nexus 4 device.
- This method doesn’t wipe any data in the process. So, do not skip any steps listed below:
- Firstly, download Android 4.3 JWR66V stock file from here.
- Secondly, extract the downloaded file and save all its content into a single folder to the PC. (Make sure that you extract all the files within the tgz file included and after that copy them all into a single folder in your PC)
- Turn off the Nexus 4 device.
- Boot it into Bootloader Mode. (Like as in step 5 from the first method).
- Now, connect the Nexus 4 device to the PC using the USB cable.
- Launch a CMD (Command Prompt) window in the same location where you’ve unzipped the files and are located.
- Next, install the OTA Update file using the following command lines:
> adb reboot-bootloader
> fastboot flash bootloader bootloader*.img -> the ‘bootloader*’ have to be changes on the name of the bootloader image you downloaded previously.
> fastboot reboot-bootloader
> fastboot flash radio radio-mako-m9615a-cefwmazm-2.0.1700.84.img
> fastboot reboot-bootloader
> fastboot flash system system.img
> fastboot flash boot boot.img
> fastboot format cache
> fastboot reboot- These were all steps which should to be proceeded in order to successfully install the latest Android 4.3 JB JWR66V firmware OTA Update on the Nexus 4 device.
- Note: the first boot after the reboot with the new stock ROM will require more time as usually to load all the required installed files.
Congratulation, these were all the steps and prerequisites necessary in order to install the latest official Android 4.3 JWR66V Jelly Bean OTA factory Image.
thank you
Last edited by satch1234; 09-12-2013 at 05:30 AM. Reason: Link removed
There are currently 1 users browsing this thread. (0 members and 1 guests)