General Information about Patch-Unlocking (start here if you want to unlock)

[NarekG]

but you can't unlock with this step you need to flash device with setool

hey bro, listen i tried to flash my k610i to w660 and after the flashing i turned on the phone and it says "INSERT CORRECT SIM CARD" i tried to unlock the sim but also got another problem which says "CONFIGURATION ERROR, PLEASE CONTACT YOUR etc. you know....so i need help now,what should i do now? :(

[riders4sia]

CONFIGURATION ERROR answer is here : CONFIGURATION ERROR - Answer is here - Top Sony Forums

[talhab6]

any 1 need help flashing or unlocking go 2 Need help flashing or unlocking your phone? - Top Sony Forums

[Smart]

You may fash to original firmware K610i.

[wayney36]

PLEASE HELP need to unlock my sony ericsson w995 dont know wot 2 do plz plz help

[tanjot]

If your phone's CID is 52 you can unlock it free using AERIX other wise you have to pay and program to be used is D-ultimate unlocker

[s0kii]

how do dowload get link

[foxpak]

noob sucessfully unlocked an old Z610i from 3 network in oz

the se2 tool unlock guide worked perfectly as long as the guide is followed exactly. i mean step by step and understand what is being described. read a little ahead to get the idea of what is going on. I was able to sucessfuly unlock a z610i :-) the only step i was uncertain of was what was the "main" file. It can be downloaded in the firmware section of top sony downloads (registration required) make sure the correct firmware main is used for your fone. i used the generic firmware main file. the unlock creator needs the main file to be extracted from the archive. the fone must never again be updated with the official se update or the unlock is lost. remember to disable any kind of auto firmware update on your shiny new usefull fone.

the content here was created by very smart ppl thank you all, you have undoubtably saved many many fones, a great service.

[sriram170]

Action journal
13:53:58   Identify
13:53:58   Shows detailed information about the connected phone.
13:53:58   Operating system: Microsoft Windows XP Professional Service Pack 3 (build 2600)
13:53:58   Application version: 0.15.2648 (beta)
13:53:58 . The action name is 'Identification'
13:53:58   Selected phone type: T715
13:53:58   Selected connection method: USB EROM
13:53:58 i Instructions
13:53:58 i 1. Make sure the phone battery is charged to at least 50%.
13:53:58 i 2. Switch off the phone!
13:53:58 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
13:53:58 i 4. Press and hold the button C, then connect the cable to the phone!
13:53:58 . The action started waiting for the user
13:54:18 . The action finished waiting for the user
13:54:18   Connecting via SEMC USB Flash Device (USB1)...
13:54:19   Device driver version: 2.2.0.5
13:54:19   Entering baseband CPU service mode...
13:54:19   Detected chipset: DB3210 'E800
13:54:19   Boot mode: EROM
13:54:19   IMEI: 00440107688281
13:54:19   OTP CID: 49
13:54:19   OTP area status: Locked
13:54:19   Product type: Prototype
13:54:19   Effective color: Red
13:54:19   Sending loader...
13:54:20   Sending loader...
13:54:21   NAND flash chip ID: 002C-00AA
13:54:21   Phone type: T715
13:54:21   MAPP CXC article: R1GA026     prg1225-2835_APAC_AM
13:54:21   MAPP CXC version: R1GA026
13:54:21   CDA article: 1227-4727
13:54:21   CDA version: R9A
13:54:22   Default article: 1220-5169
13:54:22   Default version: R1GA026
13:54:22   Language package: C-ASIA
13:54:22   The phone is not locked to a network.
13:54:22   Sending loader...
13:54:23   Starting file system...
13:54:29   Initializing GDFS access...
13:54:29   Turning off the phone...
13:54:30 i Please disconnect battery and cable from the phone!
13:54:30 s Successfully done.
13:54:30 . The action entered shutdown phase
13:54:30 . The action reported success

Additional details
---
25 02 16 84 C5 2B 6D 20 9F 14 81 84 93 22 55 A8 
B9 62 47 D9 BB A6 3D DE 11 AB 51 6C 1D 92 2F E0 
C7 A2 B9 64 0B 38 0D 40 3F C2 44 95 32 9C 
---

this is ma mobile log do i have any prob lem can u check and tell me

[leeuk]

noob sucessfully unlocked an old Z610i from 3 network in oz

the se2 tool unlock guide worked perfectly as long as the guide is followed exactly. i mean step by step and understand what is being described. read a little ahead to get the idea of what is going on. I was able to sucessfuly unlock a z610i :-) the only step i was uncertain of was what was the "main" file. It can be downloaded in the firmware section of top sony downloads (registration required) make sure the correct firmware main is used for your fone. i used the generic firmware main file. the unlock creator needs the main file to be extracted from the archive. the fone must never again be updated with the official se update or the unlock is lost. remember to disable any kind of auto firmware update on your shiny new usefull fone.

the content here was created by very smart ppl thank you all, you have undoubtably saved many many fones, a great service.

Hi,

Can anyone direct me to this guide as i'm trying to unlock the same phone in the UK on 3.

Thanks.