Results 1 to 1 of 1
  1. #1
    Top Platinum jasmin's Avatar
    Join Date
    Sep 2007
    Device
    K800i
    Posts
    2,590
    Thanks
    54
    Thanked 1,513 Times in 731 Posts

    Exclamation Flash your phone using SETool 2 Lite

    Hello

    Here is described, how to make a full flash with SETool 2 Lite.

    DOWNLOAD SETool 2 Lite 1.10

    Upgrade from 1.10 to 1.11:

    SETool 2 Lite 1.10 to 1.11 update

    Here can you download :

    SeTool 2 Lite 1.11 with video tutorials


    1. Back-up your GDFS file and write your GDFS.

    Look to the left column and down you will see a button called “Read GDFS”. Click it, and then hold down the C button on your phone, and then plug in the cable. Eventually it will get to a point , where it says “PROGRAMMING FLASH”. Once it says Unplug the cable , then Unplug your phone, take the battery out, put the battery back in, hold down C, press the “READY” button, then plug the phone back in, BUT right after you plug it in, about 2 seconds after or so, release the C button. SETool 2 Lite will now read the GDFS and then it will say “Getting GDFS Chunk” , and then once it has fully read your GDFS, you can click “Quit”.Take the battery out for about 20 seconds, and then put it back in.

    "Write gdfs" will write gdfs to phone in BINARY format. File selected in "MISC. Box" will be assumed as gdfs in binary format.
    2. Flash your phone using SETool 2 Lite

    Step 1: Shut down your phone and open SETool 2 Lite.
    Step 2: Choose your phone model.
    Step 3: Press the ADD button and select the Main&FS files (.mbn & .fbn). MAIN and FS can also be bin files. In fact the only important thing is that, they're unencrypted.
    Step 4: Select the archive with the customization files (.zip).After it is recognized by the program , in the left side will appear informations about the customization.The archive(.zip) contain files from tpa/preset/custom.
    Step 5: Press the FLASH button.
    Step 6: Connect the usb cable while holding down the "c" button un your phone. Then wait for the process to finish.
    Step 7: Disconnect your phone , get the battery out for 5 seconds , reintroduce it and start up the phone.It will appear a screen with "Please Wait...", wait 1-2 minutes and then the phone will start normally.


    Nice day and

    If you thank somebody, please use the Thanks button.
    Last edited by jasmin; 04-08-2008 at 05:36 PM.


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •