Did you follow every step of B. How to apply the generated patches to DB2020 CID52 phones ?
In order to apply patches you must first apply "quick access patch".
Did you follow every step of B. How to apply the generated patches to DB2020 CID52 phones ?
In order to apply patches you must first apply "quick access patch".
Last edited by hyperion17; 07-06-2010 at 05:20 AM.
i do that but 15 sec wait n then seetool say unplug phone flashed error :(
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
erom_readvar: error reading unit 0/E
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
Elapsed:4 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35799401820425 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Starting to process VKP patch script: C:\Documents and Settings\Microsoft\Desktop\quick_access_K810_R8BA0 24.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45C80000
Blocks selected OK. Reading blocks: 2
Block @ $44140000 read error. Have only: 00000000 bytes
Elapsed:56 secs.
Abort all operations.
Can't load ID loader !
Elapsed:2 secs.
RECOVERY MODE STARTED
Abort all operations.
Elapsed:4 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:40 secs.
well, that's not the right way to apply quick access patch.
Start setool2lite v1.11, select model, tick Bypass DB2020 Security, add the main firmware and in the Misc ... select the quick access patch file. click the Flash button, wait for instruction on the setool log window and so as instruction. i hope you'll successfully apply quick access patch. to apply patch after quick access patch successful, unplug cable, reinsert battery, now tick the "Use quick access patch", on the misc ... select the patch file and click on the "Write script" and do as instructed. please post result
I keep getting flash error and can not remove network limitations as it dose not register my 02 sim
hi am new to phone unlocking all i want is my w660i on o2 NOT HUTCHINSON'S 3G !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! lol
i am competent comp user i soft-mod games consoles not phones lol
anyway here is my problem
i have so far flashed my phone with xs++ and mainly setool2 1.11
i am SORT OF sure that QA patch worked but don't no how 2 check
i can not find custom pack for my exact original firm main so i tried to flash with genetic firm
and then patched what i think was successfully simunlock patch but not successful when i turn phone on anyway here is phone details as my phone stands now will leave all alone until some very help-full person reply's
could some one also write what firm main firm fs an custom pack i should try for my phone
original firm main was (W660_R6BC002_MAIN_HUTCHISON_FY_RED52)
original firm fs was (W660_R6BC002_FS_HUTCH_1_RED52)
and cda (W660i_CDA102804_46_R14A_3_United_Kingdom)
stats from setool2 1.11
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715501257531 CERT:RED
FLASH CID:52 COLOR:RED
Model:W660i
MAPP CXC article: R6BC002 prgCXC1250446_GENERIC_FY
MAPP CXC version: R6BC002
Language Package:HUTCH_1
CDA article: CDA102804/46
CDA version: R14A
Default article: cxc1250839
Default version: R6BC002
Network LOCKED
Operator: MULTIPLE
Elapsed:17 secs.
hope info i posted is enough to help you to help me and others
PS. I ALSO THINK A SEPARATE GUIDE FOR THIS PHONE'S SETUP NEED 2 BE POSTED AS IT IS NOT AS OTHER GUIDES SAY OR IF IT IS OTHER GUIDES NEED 2 GO INTO MORE DETAIL I WILL HELP IF IT IS NEEDED
yours madyotto
Could somebody please help me out with my w810. It seems like I have a damaged or corrupted GDFS whic I successfully backed up (but I guess it was corrupted already) nevertheless, I got a gdfs form the download section and was able to successfully apply it to my phone stating imei mismatch etc...
I then flashed my phone successfully til the end on SETool Lite v.1.11, but as I turn the phone on, all it shows is a white screen and it rarely turns on.
I'm not really too good with falshing pohnes but I guess I followed the right proceedure. First time I flashed it it worked fine however there were things missing from the settings screen (display icons etc. found on top of the selection for general, sounds, display etc.) and when I shut down the phone it does not give the usal SE and walkman splashscreen during shutdown.
So I thought, I ought to flash the CDA again but it came up with configuration error, tried another & the phone wouldn't turn on.
Next time I checked it gave me a prompt of cant read SRSC or something but was able to back up my phone's gdfs. Now after successfully flashing it, all it gives is the WSOD. Can I still revive my W810?
Help needed...please :-)
select your prefered language here : Top Sony Forums - Languages Description and post reply
i had the same problem nd im still trying to fathom out what im doing (well reading the guides anyways) but instead of pressing c press 2 that will work :)
please tell me link for download link
There are currently 1 users browsing this thread. (0 members and 1 guests)