Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17
  1. #11
    Member Dunanik's Avatar
    Join Date
    Jan 2007
    Device
    -
    Posts
    33
    Thanks
    0
    Thanked 1 Time in 1 Post
    . . . . . . . . . . . .
    Last edited by Dunanik; 01-09-2008 at 03:46 PM.

  2. #12
    Recently Initiate
    Join Date
    Dec 2007
    Device
    -
    Posts
    7
    Thanks
    0
    Thanked 0 Times in 0 Posts
    How Am I suppose to flash it/ fix the EROM. when my computer doesn't even pick up the phone while holding "c".

    only thing that happens is when I plug the phone to the charger, the inferred lights up :/ ( doesn't light up when connected to the computer :( )

  3. #13
    Recently Initiate sokettro's Avatar
    Join Date
    Apr 2007
    Device
    -L6i-mode
    Posts
    4
    Thanks
    0
    Thanked 2 Times in 1 Post
    Quote Originally Posted by muruganc View Post
    How Am I suppose to flash it/ fix the EROM. when my computer doesn't even pick up the phone while holding "c".

    only thing that happens is when I plug the phone to the charger, the inferred lights up :/ ( doesn't light up when connected to the computer :( )
    Check to see if you dont have a hardware problem, pins of the charger way...Insert a fully charged baterry, on the phone, hold C for about 3 seconds and insert the USB cable. Repeat this procedure, until you will have a answer from the phone. Dont worry, i have a w810i with the same problem, like you, i have a damaged erom, damaged gdfs, with other imei, red led light blinking. I have flashed a new w810i erom with setool lite and is responding. Im trying to revive it, the biggest problem is that is a problem to find free programs to mess with this phone. Im using sekingserver software, is like wotan and the others, but there is a generally problem messing with DB2010...i will try to find a bether way until i will have to change the flash ic, i hope will not be necesarry.

  4. #14
    Advanced user 93bh's Avatar
    Join Date
    Dec 2007
    Device
    w580i, w810i Paradise
    Posts
    203
    Thanks
    3
    Thanked 29 Times in 20 Posts
    I'm scare that w810i will be dead when it crash or turn off by itself.

    I guess the battery is old like one year old, and it can drain quickly.

  5. #15
    Recently Initiate sokettro's Avatar
    Join Date
    Apr 2007
    Device
    -L6i-mode
    Posts
    4
    Thanks
    0
    Thanked 2 Times in 1 Post
    Quote Originally Posted by 93bh View Post
    I'm scare that w810i will be dead when it crash or turn off by itself.

    I guess the battery is old like one year old, and it can drain quickly.
    Dont worry, i have made a lot of tests to a w810i wich belongs to me and always you will have the chance to enter the phone in the flash mode. Is tested by me, if software will go off, always the hardware short cut, presing the C buton, will work.
    The only problem will remain the software that is suporting a full repair of a DB2010...

  6. #16
    Member
    Join Date
    Sep 2007
    Device
    -
    Posts
    35
    Thanks
    4
    Thanked 5 Times in 3 Posts
    just curious guys, what are the symptoms of a damaged GDFS, and how would a GDFS get damaged in the first place?

  7. #17
    Recently Initiate sokettro's Avatar
    Join Date
    Apr 2007
    Device
    -L6i-mode
    Posts
    4
    Thanks
    0
    Thanked 2 Times in 1 Post
    Quote Originally Posted by C.Blue View Post
    just curious guys, what are the symptoms of a damaged GDFS, and how would a GDFS get damaged in the first place?
    the symptoms of a damaged gdfs are: red blink, or, if flash is corupted, the error will be blank screen, if gdfs has other imei, the phone wont start, will remain on the startup of phone, if has a bad gdfs and erom, the phone will restart itself and will blink in red.

    dont do like me, always backup your gdfs, is not a sugestion, it must be the first operation that any one will do on the phone. flashing with a bad gdfs or from another phone thats having other imei, will give a red blink, if the flash or erom is corupted, or the phone will not terminate the start procedure, from the graphic interface.

    i have tried with seking server. the phone its ok now, is starting, but, is remaining on the "please wait" and nothing is to do with seking server. i heard that with setool 3 is posible to repair the imei from the phone, for free, only with the dongle. is the truth, is posible, you have to change the imei with the original one, and after a full repair of the gdfs and erom, the phone will work fine. im will buy the setool 3 only for this, to repair this phone, you may have to do the same, by now is the only way to repair a w810i phone.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •