Results 1 to 1 of 1
  1. #1
    Banned
    Join Date
    May 2007
    Device
    c702 (speed black) & s700
    Posts
    597
    Thanks
    34
    Thanked 272 Times in 111 Posts

    Exclamation REPAIRING EROM GUIDES for most sonyericsson phones

    REPAIRING EROM GUIDES for most sonyericsson phones cruiser or dcu-60 cable required,

    Important information
    your erom only really needs repairing if it's dead or damaged, a sign of a dead erom is normally a blinking red led in the infra red port.
    Do NOT Flash different EROM Phone Model to your phone,
    You need to use same CID in EROM as your phone EROM CID. example:You can NOT flash K800 CID51 EROM
    to a K800 CID49 Phone.You can flash K800 CID49 EROM to a K800 CID49 Phone
    Verify which is your EROM's version, it will be in xs++ logs or setool logs, or connect to xs++ and it will tell you look for this EROM CID: .

    xs++3.1 guide needed files
    xs++3.1, http://www.4shared.com/file/32041400...XS_online.html
    usb flash drivers for dcu-60 cable, http://www.4shared.com/file/27136649.../gg-setup.html
    cruiser drivers, http://www.4shared.com/file/27294476/b8e97...ble_driver.html
    eroms, Downloads - EROM EEPROM - Top Sony Forums

    WOTANSERVER guide needed files
    wotan , http://www.4shared.com/file/32041706/e9fae...otanClient.html
    usb flash drivers for dcu-60 cable http://www.4shared.com/file/27136649.../gg-setup.html

    SETOOL 2 LITE 1.10 guide needed files
    setool 2 lite 1.10, http://www.4shared.com/file/33508971...tool2lite.html
    drivers , when you extract setool there will be a folder called drivers all drivers are in there

    far+sepf guide needed files
    db2010, cid:36 erom, http://www.4shared.com/file/32126040/b8718...0_00020000.html
    farmanager 1.07, http://www.4shared.com/file/27136179/48b00...Manager170.html
    sepf 10.0.44, http://www.4shared.com/file/27135996/5a2ac...SEFP010044.html
    sepf 10.0.51, http://www.4shared.com/file/27555816/87e09...SEFP_01051.html
    usb flash drivers for dcu-60 cable, http://www.4shared.com/file/27136649.../gg-setup.html

    Gflash guide needed files
    usb flash drivers for dcu-60 cable, http://www.4shared.com/file/27136649.../gg-setup.html
    gflash 206, http://www.4shared.com/file/32043297/e3fd6...GFlash20b6.html

    SEKING guide needed files
    SEKING, http://www.4shared.com/file/32042512/e6bd6...53_English.html
    usb flash drivers for dcu-60 cable, http://www.4shared.com/file/27136649.../gg-setup.html

    kulankendi guide needed files
    kulankendi, http://www.kulankendi.com/index2.php?pStrona=download
    usb flash drivers for dcu-60 cable http://www.4shared.com/file/27136649.../gg-setup.html

    xs++3.1 erom repair guide, works with dcu-60, cruiser, works with db2010 cid 36, cid 49, db2012 cid 50 cid 51 cid52, db2020 cid 49 cid 51 cid 52
    step A selecting the correct erom, the erom must be in a .bin format.
    a.Turn off the phone, remove the battery, sim and memory card,
    b.run xs++.exe and press connect, if your using a cruiser cable you must select the correct com port from the drop down select port box.
    c.now reinsurt your battery and connect the phone holding down C.
    d.you are now connected to xs++.
    e. ,
    i have highlighted what needs to match when choosing your new erom.
    Platform: <<<some erom files don't contain this information, but longs u match up the rest of the information it will be fine.
    EROM CID: <<< very important must match your erom file 100% Don't confuse with the OTP CID.
    EROM Color: <<< most eroms and phones are red
    Phone ID: <<< very important must match your erom file 100%
    STEP B flashing the erom
    1.Turn off the phone, remove the battery, sim and memory card,
    2.run xs++.exe and press connect, if your using a cruiser cable you must select the correct com port from the drop down select port box.
    3.now reinsurt your battery and connect the phone holding down C.
    4.you are now connected to xs++.
    5.Select your EROM's file in .bin format with the box Flash Main Firmware like this
    6.press FLASH.


    WOTANSERVER, erom repair guide, dcu-60 db2020 phones only
    a.Turn off the phone, remove the battery, sim and memory card,
    1.download wotan
    2.run wotan.exe
    3.erase all log-in information
    4.Press start button
    5.Insert the battery then connect the phone while holding down 2+5
    6.Release the buttons then wotan should update your erom.

    SETOOL 2 LITE 1.10 erom repair guide dcu-60 or cruiser, supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
    a.Turn off the phone, remove the battery, sim and memory card,
    1.unzip and run setool2 lite 1.10
    2.select phone type from phone type drop-down list,
    3.press identify
    4.reinsurt battery and holding down 2+5 connect the phone
    5.press the unlock/repair button

    far+sepf, dcu-60 or cruiser db2010 cid:36 only can also be used to convert from brown to red.
    a.download erom_db2010_red36_44000000_00020000.zip and unzip it,
    b.Turn off the phone, remove the battery, sim and memory card,
    1.install farmanager
    2.go to programme files/Far/plugins
    3.extract sepf 10.0.44 here
    4.now extract sepf 10.0.51 in extactly the same place as 10.0.44
    5.now run farmanager and press F11
    6.select SEFP 0.10.51 FAR should look like
    7.select DCU-60 under device,921600 under speed,then ur phone e.g k750_w800_cid:36
    8.now press enter the matrix, reinsurt your phones battery and connect your phone holding down C
    9.with the right side of far find erom_db2010_red36_44000000_00020000.raw
    10.drag and drop it onto the FLASH folder on the left side
    11.Select Flash raw image option and check that address is 44000000 and length is 20000
    Press Flash
    12.Confirm flashing erom by pressing Yes

    Gflash,
    dcu-60 db2010 cid:36 only can also be used to convert from brown to red.
    a.Turn off the phone, remove the battery, sim and memory card,
    1.download gflash 2.0 beta6
    2.run glash.exe
    3.select the Repair/GDFS/Patching tab along the top
    4.click flash EROM
    5.then press the button
    and select RED_CID36.EROM
    6.press the Repair/Read/Patch button
    7.reinsurt the battery and connect your phone holding down C.

    SEKING, dcu-60/crusier cable
    a.Turn off the phone, remove the battery, sim and memory card,
    1.download seking
    2.run seking
    3.under port option press com port from crusier cable, and press DCU-60 USB for DCU-60
    4.under select option select your phone model from the drop-down box
    5.under Operation option select Repair EROM
    6.then press identify now reinsurt the battery and connect your phone holding down C
    7.now with a tick in the Repair EROM box, press GO.

    VIDEO guide for SEKING here http://www.4shared.com/file/32126053/3863e...ir_Up_EROM.html

    kulankendi dcu-60 cable
    a.Turn off the phone, remove the battery, sim and memory card,
    1.open kulankendi tick the EROM Update
    2.press the Flash Phone button
    3.remove then reinsurt the battery & connect the phone holding down C
    4.you erom will be updated.
    Last edited by ts014; 03-07-2008 at 05:47 PM. Reason: new erom repair method added 07-03-08


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •