Page 1 of 14 12311 ... LastLast
Results 1 to 10 of 140
  1. #1
    Banned
    Join Date
    May 2007
    Device
    c702 (speed black) & s700
    Posts
    597
    Thanks
    34
    Thanked 272 Times in 111 Posts

    Smile Using FAR+SEFP with a DB2012 & DB2020 phone (Guide)

    What you will need
    farmanager from Far Manager Official Site : main or http://www.4shared.com/file/27136179/48b00...Manager170.html
    sepf 10.0.44 from http://www.4shared.com/file/27135996/5a2ac...SEFP010044.html
    sepf 10.0.51 from 4shared.com - online file sharing and storage - download SEFP 0.10.51.zip & db2020 boot scripts (SEPF) from http://www.4shared.com/file/27136065/59df1e26/SEFP.html
    xml source generator from http://www.4shared.com/file/27136792/456c8...eGenerator.html
    usb flash drivers from http://www.4shared.com/file/27136649.../gg-setup.html

    a.to install the usb flash drivers download the .exe file and run it

    Before following this guide please have a full battery 90-100% and have usb flash drivers installed

    1.install farmanager
    2.go to programme files/Far/plugins
    3.extract sepf 10.0.44 here
    4.now extract sepf 10.0.51 in extactly the same place as 10.0.44
    5.enter the SEFP folder and run sefp0.10.0.51patch.exe
    6.now download SEFP.zip and extract to files /Far/plugins
    7.now run farmanager and press F11
    8.select SEFP 0.10.51 FAR should look like
    9.select DCU-60 under device,921600 under speed,then ur phone e.g db2020 cid:52 (u can use xs++2.2 to find this out and remeber to use erom cid)
    10.press enter the matrix
    11.u should see this
    remove battery for a few secs and then reinsurt it and do what is says connect cable holding down C.
    12.u will now see
    13.click on FS
    14.now wait a few minutes while it loads everything
    15.now u will see
    16.now browse around clicking the folders (.. above the folders is back), find wot file(s) u want to copy off. ifs,contains camdriver acoustics etc. tpa contains layout,menu etc. F8 deletes stuff if u find anything u don't want.
    17.when u find wot file u want too copy off make a note of the path, use the right side of far too browse where u want too copy it to, then select the file u want copyed and press F5 then press copy copy off all the files from the same folder u want, it will write a 0byte files but this is ok.
    18.now to disconnect from far safely, keep clicking back (..) until u see this then click yes and disconnect ur phone, now do step 33
    19.now run the xml source generator
    20.and copy usb/other/ in the Enter destination box like this
    21.press "select files that will be copied to the phone" then select all ur 0 byte files that u copied off with far
    22.now type in the path of the files in the "Enter copy source" box u should have made a note of the path e.g tpa/preset/custom
    23.now press "Generate XML source"
    24.press "save as"
    25.for file name type customize_upgrade.xml, it's very important u name it that
    26.press save, save it somewhere easy to find
    27.now follow steps 7-15 again
    28.go to tpa/preset/custom
    29.with the right side of far find ur customize_upgrade.xml
    30.now highlight click it and press F5 then press copy
    31.customize_upgrade.xml should now be in tpa/preset/custom on ur phone
    32.follow step 18 again,
    33.take out the batter then re-insurt it after a few secs,
    34.now turn ur phone on, it will say "please wait" for about a minute leave it.
    35.the file should be copied from the phone FS to the phone memory in the other folder.
    Last edited by MaxDamage; 03-09-2008 at 04:55 AM.

  2. The Following 28 Users Say Thank You to ts014 For This Useful Post:


  3. #2
    Recently Initiate
    Join Date
    May 2007
    Device
    -
    Posts
    16
    Thanks
    0
    Thanked 2 Times in 1 Post
    Awesome tutorial, mate! :) Appreciate it!

  4. The Following 2 Users Say Thank You to RevoWution For This Useful Post:


  5. #3
    Recently Initiate arafeva's Avatar
    Join Date
    Nov 2006
    Device
    -
    Posts
    10
    Thanks
    4
    Thanked 2 Times in 1 Post
    Really fab tutorial, cheers mate ^O^

  6. The Following 2 Users Say Thank You to arafeva For This Useful Post:


  7. #4
    Recently Initiate
    Join Date
    Nov 2007
    Device
    -
    Posts
    5
    Thanks
    0
    Thanked 2 Times in 1 Post
    Far Manager Is One Dumb Gui Application , Dumb Dumb Dumb

    Dumb Dumb Dumb>>>>>>
    Last edited by georgedoan; 11-07-2007 at 05:16 PM. Reason: Automerged Doublepost

  8. The Following 2 Users Say Thank You to georgedoan For This Useful Post:


  9. #5
    Member lehnherrba's Avatar
    Join Date
    Sep 2007
    Device
    K700i
    Posts
    42
    Thanks
    13
    Thanked 7 Times in 6 Posts

    Question

    Quote Originally Posted by number1 View Post
    2.go to programme files/Far/plugins
    3.extract sepf 10.0.44 here
    4.now extract sepf 10.0.51 in extactly the same place as 10.0.44
    5.enter the SEFP folder and run sefp0.10.0.51patch.exe
    Super post, Just to clarify we don't need separate folders for SEFP10.0.51, and for SEFP10.0.44 - instead we pile the lot into the same SEFP folder within the plugins folder of course.
    ==Ozz

  10. The Following 2 Users Say Thank You to lehnherrba For This Useful Post:


  11. #6
    Banned
    Join Date
    May 2007
    Device
    c702 (speed black) & s700
    Posts
    597
    Thanks
    34
    Thanked 272 Times in 111 Posts
    Quote Originally Posted by lehnherrba View Post
    Super post, Just to clarify we don't need separate folders for SEFP10.0.51, and for SEFP10.0.44 - instead we pile the lot into the same SEFP folder within the plugins folder of course.
    ==Ozz
    yep, and if it asks to overwrite files just click yes

  12. The Following 2 Users Say Thank You to ts014 For This Useful Post:


  13. #7
    Recently Initiate
    Join Date
    Oct 2007
    Device
    w610i
    Posts
    7
    Thanks
    1
    Thanked 1 Time in 1 Post
    the xml source generator doesn't run

  14. The Following User Says Thank You to salehrtc For This Useful Post:


  15. #8
    Recently Initiate
    Join Date
    Nov 2007
    Device
    -
    Posts
    8
    Thanks
    2
    Thanked 1 Time in 1 Post
    thank yuo verry much

  16. The Following User Says Thank You to catalin123 For This Useful Post:


  17. #9
    Member sandrokbca's Avatar
    Join Date
    Dec 2006
    Device
    k750i
    Posts
    21
    Thanks
    0
    Thanked 1 Time in 1 Post
    I have 1 backup General of the FS ... I find with this tutorial?

  18. The Following User Says Thank You to sandrokbca For This Useful Post:


  19. #10
    Member Yodafone's Avatar
    Join Date
    Nov 2007
    Device
    V630@W660
    Posts
    33
    Thanks
    9
    Thanked 3 Times in 2 Posts
    Just telling you, one of the files in the SEFP 10.0.51 archive is infected with a virus.

  20. The Following 2 Users Say Thank You to Yodafone For This Useful Post:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •