Results 1 to 9 of 9

Thread: Support FAQ'S

  1. #1
    Top Sony Administrator Top Sony's Avatar
    Join Date
    Nov 2006
    Posts
    144
    Thanks
    3,915
    Thanked 817 Times in 59 Posts

    Support FAQ'S

    Support FAQ'S


    My phone is stuck on the power on prompt?
    This could be a number of things depending on what cable you own.
    1. Check the drivers have been installed correctly.
    2. In some cases you will need to tick the DTR and RTS checkboxes.
    3. Make sure you have selected the correct com port
    4. If you are using a DCU60 mini port cable make sure you use the tick boxes to select correct cable.
    5. Make sure there are no device conflicts.
    6. Check to see if your cable is supported by TMS. click here
    I am getting a incorrect username/password error ?
    Please cut and paste the username from the email if this still doesn't work then log a support request and we will reset the password for you.
    I have received a error during the unlocking/flash process and now I have lost the credit.
    The server will make a screen shot all you need to do is log a support request with all the information and one of our team will help you and replace any lost credits.
    To change the handsets language do I need to flash just the language pack?
    To successfully change the language file on a phone you must flash the language pack and the firmware at the same time. Also you must make sure both versions are the same otherwise your phone wont work properly after flashing.

    After debrand/upgrade I don't have the MMS/WAP settings?
    After flashing the phone these will need to be resent to your phone. You can do this for free at www.sonyericsson.com. All you need to do is find the correct page for your phone and then select MMS/WAP configure then enter your phone number and network and the settings are sent out by text.


    Pre Order FAQ'S


    What should check before ordering?
    1. You have the correct cable for the server.
    2. Your phone is supported for the function you require
    3. If you want to unlock/debrand check there are compatable firmware's available for your phone.

    After Debranding/Upgrading will I be able to use SEUS?
    After you use the TMS tool to debrand/upgrade a phone then you will not be able to use the SEUS (Sonyericsson Update Service).

    You will need to use TMS for future upgrades afterwards.
    Is unlocking mobile phones legal ?
    Yes mobile phone unlocking is 100% legal as long as the phone isn't stolen. It will invalidate your manufacturers warranty though.
    If I flash/debrand will I lose my phone memory?
    Yes if you are only unlocking then the phone memory will not be erased. However if you are using debrand or firmware upgrade files then your phones memory will be wiped.
    This process doesnt affect memory cards.
    What Operating Systems Does TMS Support ?
    Total Multi Server works with the following Windows systems
    - Windows 98SE
    - Windows ME
    - Windows 2000
    - Windows XP Media Center
    - Windows XP Home Edition
    - Windows XP Professional
    - Windows XP 64 Bit


    Customer FAQ'S

    How do I get support ?
    We offer full support to our customers if you need our support team for any reason then just use the online form.To make sure your query can be dealt with quickly please be sure to log your TMS username when making requests.

    I ordered online but didnt receive a username/password?
    If after 24 hours of payment you don't have a mail with the login information, please send a mail to mobile@topsony.com
    telling us:

    Your PayPal user (if you use one)
    The PayPal Transaction ID
    The mail address used for the payment.

  2. The Following 2 Users Say Thank You to Top Sony For This Useful Post:


  3. #2
    Recently Initiate emma333's Avatar
    Join Date
    Mar 2007
    Device
    -
    Posts
    2
    Thanks
    0
    Thanked 2 Times in 2 Posts

    help...

    Im in need of help, I used davinci to flash my k790 but had to flash to K800 because they dont support the CID52 for the K790, I was told I need to read and rewrite my gdfs but they still dont support that at this time. My phone says "no network coverage". Is there anything I can do with Wontan or Multi to fix my phone? Please Help.

  4. The Following User Says Thank You to emma333 For This Useful Post:


  5. #3
    Recently Initiate
    Join Date
    Feb 2007
    Device
    K750i, K530i
    Posts
    12
    Thanks
    0
    Thanked 1 Time in 1 Post
    use phone xs its free of cost and can flash db2020 phone but the finalization process takes a lot of time as u have to bruteforce

  6. The Following User Says Thank You to tanmoy89 For This Useful Post:


  7. #4
    Recently Initiate emma333's Avatar
    Join Date
    Mar 2007
    Device
    -
    Posts
    2
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Quote Originally Posted by tanmoy89 View Post
    use phone xs its free of cost and can flash db2020 phone but the finalization process takes a lot of time as u have to bruteforce
    Use XS or XS++? Were can I find the files for CID52? I havent seen them anywhere, also I tried the SEUS today and now the damn phone wont even turn on!!! Im freaking out, I paid too much for this phone to let it go to crap. Please help........

  8. The Following User Says Thank You to emma333 For This Useful Post:


  9. #5
    Advanced user Pichu's Avatar
    Join Date
    Dec 2006
    Device
    SE W890i
    Posts
    136
    Thanks
    4
    Thanked 53 Times in 38 Posts
    Try in Wotan:

    http://www.wotanserver.com/en/suppor...90-debranding/

    There is a CID52 FW available on their page.

  10. The Following User Says Thank You to Pichu For This Useful Post:


  11. #6
    Banned
    Join Date
    Jul 2007
    Device
    -
    Posts
    709
    Thanks
    25
    Thanked 278 Times in 100 Posts
    XS can't finalize CID 52 yet. You can flash Main or FS, i'm not sure which of them it was. That won't help you any further, you'll need Wotan or DaVinci to finalize the phone.

  12. The Following User Says Thank You to ts013 For This Useful Post:


  13. #7
    Recently Initiate harto's Avatar
    Join Date
    Aug 2007
    Device
    -
    Posts
    15
    Thanks
    2
    Thanked 2 Times in 2 Posts
    Quote Originally Posted by justme View Post
    XS can't finalize CID 52 yet. You can flash Main or FS, i'm not sure which of them it was. That won't help you any further, you'll need Wotan or DaVinci to finalize the phone.
    Just released XS++ 1.6.8, and it supports CID 49/51/52 finalization.

  14. The Following User Says Thank You to harto For This Useful Post:


  15. #8
    Recently Initiate
    Join Date
    Apr 2007
    Device
    -
    Posts
    7
    Thanks
    2
    Thanked 1 Time in 1 Post
    R9GA001_R6E28 send me please sombedoy!

  16. The Following User Says Thank You to dzsimmy For This Useful Post:


  17. #9
    Recently Initiate
    Join Date
    Feb 2009
    Device
    -
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •