Well ... i´ll make here a tutorial explaining how to use FAR with phones that are CID 49 !!
This can only be done thanks to "den_po" , a member form SE-NSE forums who make it possible now!! It was a "tiny new year gift" !
http://forums.se-nse.net/index.php?showtopic=6571&st=0
Edit.:
- v3.3
use only with sefp v0.10.0.51 (http://sephone.nm.ru/tools/)
now with any erom
w550: breakin-loader from version 3.0
Programs and Files needed :
1º PhoneXS 2.10 Alpha 5 ( or new PhoneXS ++) so we can flash a part of a firmware into our phones!
2º Far Manager 1.70 + SEFP plugin
3º db2010cid49_3_2.rar.zip or newer version db2010cid49_3_3.rar.zip, which has the files created by den_po that will allow us to use FAR !
Link and mirrors : (links from forums.se-nse must be registered)
http://www.uploading.com/file[....]0/db2010cid49_3_2.rar.zip.html
(db2010cid49_3_2.rar , files for RED and only R2B001 EROM phones)
Mirror for db2010cid49_3_2.rar : http://www.uploads.sc/downloa[....]2a1438cd25770620c3113c81e04e1f
http://forums.se-nse.net/index.php?act=Attach&type=post&id=3667
(db2010cid49brown.rar.zip , brown loaders for Brown phones)
Mirror for db2010cid49brown.rar.zip:
http://www.uploads.sc/downloa[....]2da79ce280bf885f824a0eadd1a7a4
http://forums.se-nse.net/index.php?act=Attach&type=post&id=3692
(db2010cid49_3_3.rar.zip , new version that comes with upadted SEFP plugin and supports all EROM´s )
Mirror for db2010cid49_3_3.rar.zip: http://www.uploads.sc/downloa[....]cc76b6ec0e9f705ed8da006f5728d9
*Extract the file (db2010cid49_3_3.rar.zip) to a folder ! Inside it you will see 2 folders and 2 files and in this ! The folder SEFP must be copied to the SEFP folder in the FarManager170PluginsSEFP ! If windows ask to overwrite files, choose YES. Also you must EXECUTE the file "sefp0.10.0.51patch.exe " to apply patch so all Erom versions can work with FAR properly!
Verifications needed :
1º Edit: All EROM´s now supported!
2º USB Flash Drivers must Be installed!
3º Edit: Brown phones now supported with their loaders!!
So let´s Start!
Open PhoneXS 2.10 Alpha 5, select your Cable and Press Start! With your phone shut down , connect it to your PC holding de C button! Wait for PhoneXS to recognise it!
Now you must remember where you´ve extracted the file from den_po!!
Select Flash Main Firmware in the PhoneXs and point it to the folder you extracted the files! Select then the file that corresponds to your phone , in my case (K750i) k750w800_r2e_dcu.49r.ssw !
Then Press Flash !
The flash will start and should take less than a minute!
It will then appear Finishing Flash , after 30 seconds you can Press Stop (this from what a i read is kind of a bug from phoneXs ,it finalizes the flash but keeps on the finishing flash line) , press YES to confirm and then Close to shut down PhoneXS !
Now unplug your phone, remove battery and after 30 seconds put it again!
PS.: After you have flashed wit the ssw file YOU MUST NOT TURN ON THE PHONE! IT won´t WORK!! You can only turn it on again after flashing back the normal firmware which is explained in the end of this tuto!
Let´s Open now Far Manager!
Press ALT+F1 and Select SEFP !
Select the cable , maximum Speed and the script which represents your phone and press Enter The Matrix ! After That you will have FS and FLASH , just press FS and you should be able to access it just like you can on CID 36 phones !
After editing all the Stuff you want you must shutdown the CSFSLoader , just keep pressing .. until is asks you if you want to quit and press Yes !
Close FAR and unplug phone!!
Open FAR again and make same procedure to connect your phone !
Now Click On FLASH .
And will be like this:
On the right side of FAR navigate to that folder you´ve previously extracted ! Enter in the REST folder and you shall see this:
Those are Firmware files that you must flash so you can you make your phone work again!!
You must flash the one which represents your current Firmware ( in my case R1DB001 ) ! You will only flash one file !
After selected the file you´ll flash Press F5 to copy it to the phone!
Press Copy again to Confirm !
Now this will appear :
Just let it in the way it appears , only make sure FLASH BABE ssw image is selected and then press FLASH !
A Warning Pop up will appear :
Just press YES to Confirm and a few seconds later you will see this :
Presse Close , quit Far , unplug phone , unplug battery and after 20 seconds put it again !
Now Turn on Phone and Voila , you have now a modded CID 49 phone !!
Just to remind that it was only tested with K750i sucessfully by now!!
By doing this tuto i sucessfully changed stuff by the third time on my K750i!
Ps.: You Must do this PROCESS every single Time you want to change Stuff on your Cell