After flashing i get a confiuration error message while inserting simcard so need a proper main + fs files
After flashing i get a confiuration error message while inserting simcard so need a proper main + fs files
Hello,
You forget to flash customization.It must be same as FS file,just reflash phone with 3 files Main+FS India+Custom file India.
You don't have to download other main and FS,just customization.
Here you can download customization: Downloads - w550custpack - Top Sony
Regards
OK finally my phone is working now
The problem was not with the process it was actually the XS++ version
So to conclude
I had Sony Ericsson w550i
Purchased in India
Had faced the " White Screen of Death " problem
So googled , realized it's a firmware issue rather than hardware
So needed to flash the phone
Used XS++ 3.1 ( The first mistake )
Secondly not flashing the custom pack ( it's necessary after you flash the device)
Trying to flash a phone that was low on battery (because the phone didnt indicate the battery level as it was dead)
What got my phone working (steps)
1. Download XS++ 2.2 (software used to flash and no matter if a new version is available download 2.2 )
2. Download the two important files
a. Main file vaibav1 - Download - 4shared
b. Firmware file vaibhav2 - Download - 4shared
3. While the files are downloading charge your phone for atleast 2 hours
4. Now ready to flash !!!
5. Remove the battery
6. Launch XS++ 2.2
7. Put the battery back
8. Press the connect button on XS++
9. Now while the screen shows you have 30 seconds to connect... Hold the 'C' button of the phone and connect the USB while still holding the C button
10. Your device will now connect and some long text will scroll
11. On the right side of XS++ select and browse the two downloaded files respectively
12. Tick the custom pack checkbox (3rd) and select the last drop down ( own_custpack)
13. Press flash
14. Now wait patiently as the phone will be flashed in two stages, it takes about half an hour for the flashing process
15. After its done " unplug your device " will be shown in the log
15. Unplug your phone, remove the battery, insert a working sim put the battery back and then switch on your phone
16. "Please wait", this message will be displayed.. so wait
17. Your phone has resurrected ( it starts :-) )
18. If any one has any issues mail me at er.chiragjain92@gmail.com
Thank you
There are currently 1 users browsing this thread. (0 members and 1 guests)