Results 1 to 4 of 4
  1. #1
    Recently Initiate
    Join Date
    Nov 2013
    Device
    -
    Posts
    3
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Unhappy k610i when switched on displays white screen and does nothing

    Regards,


    The first to apologize for my bad English , I use Google translate .


    I have problem with my k610i , which happened a few times in a few years. When you turn the phone on a white screen appears and says so , and the phone does nothing.


    I have successfully solved the problem 2 times with the Update Service . It was going very easily . Connect your phone and follow the steps , and the program do its thing and the phone normally. This time I tried using the same program but the problem is that the new version is data for my phone .


    I would not interfere even now I've found the right solution in the forums . XS++ and SeTools not yielded results and I do not know how to use them . I tried over and Far manager who recognizes the phone, but left at the next:


    Chip: DB2020 Model: k610i IMEI:xxxxxxxxxxxxx CID: 53 Domain: RED
    Uploading logic DB2020:
    Starting filesystem service...


    SE Tools results:
    Identify




    ChipID:9900,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:53
    Speed:921600
    Flash ID check:897E
    Flash props sent ok
    OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxxxxxxxxxx CERT:RED
    FLASH CID:53 COLOR:RED


    Model:K610i
    Brand:Generic Trade DE
    MAPP CXC article: R1JG001 prgCXC1250374_GENERIC_TH
    MAPP CXC version: R1JG001
    Language Package:EUROPE_2
    CDA article: CDA102497/607
    CDA version: R1A
    Default article: cxc1250376
    Default version: R1JG001


    Operator: 000-00


    Read Flash results:




    ChipID:9900,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:53
    Speed:921600
    OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxxxxxxxxxx CERT:RED
    FLASH CID:53 COLOR:RED
    Can't build loaders chain ;(
    Elapsed:6 secs.


    Read GDFS




    Will backup GDFS now.
    ChipID:9900,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:53
    Speed:921600
    OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxxxxxxxxxx CERT:RED
    FLASH CID:53 COLOR:RED
    Can't build loaders chain ;(
    Elapsed:8 secs.


    If anyone could help me, I'd be very grateful.

  2. #2
    Top Sony Team satch1234's Avatar
    Join Date
    Jun 2009
    Device
    Xperia Go
    Posts
    440
    Thanks
    5
    Thanked 68 Times in 61 Posts

    Re: k610i when switched on displays white screen and does nothing

    Hello,
    Your phone is CID53 and you must use Far manager.
    Take the needle and clean all contacts on your phone's USB connector.
    Download CID53 files from download section and customization for your region.
    It have to be same as FS file for flashing or you will have configuration error after flashing.
    Read here instructions in Sticky thread: Far Manager
    Regards

  3. The Following User Says Thank You to satch1234 For This Useful Post:


  4. #3
    Recently Initiate
    Join Date
    Nov 2013
    Device
    -
    Posts
    3
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Red face Re: k610i when switched on displays white screen and does nothing

    Thank you very much. Now I'm going to try.

  5. #4
    Recently Initiate
    Join Date
    Nov 2013
    Device
    -
    Posts
    3
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Thumbs up Re: k610i when switched on displays white screen and does nothing

    Thank you all for your help. I read this forum prior to the first post and asked for everything that had to do with my problem. When I wrote the post, I read over and over and trying everething.
    I have successfully solved the problem, but I do not know exactly how. What we do know is that I used FAR Manager + JDflasher to read data from the phone. I had a lot of problems, so I would add some rest and xml files.
    The first was opening just a flash and fs directory in which I could not get in because it has errors. Then I could just come in a flash but not to copy the files. The fs dir still could not until I copied the main FS and later in a flash dir on phone. Only then I successfully open directory fs and I copy the zip file with tpa folder.
    Now the phone works perfectly normal, as when I bought it.


    Once again sorry to my poor English.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •