w880 dead after i pressed 'executor'

[marekpc]

hi, now i know but its too late. I need solution how to bring it back to life without loosing memory, txt's etc. If no other option will flash. XS++ and setool recognize the phone.
db2020, R1JC002 (central europe), cid51 red
thanks

[suryajaya]

try to flash with cid 49 brown first. then flash again with cid 53 via setool. tick signed phone and customize phone

[boysie]

hi, now i know but its too late. I need solution how to bring it back to life without loosing memory, txt's etc. If no other option will flash. XS++ and setool recognize the phone.
db2020, R1JC002 (central europe), cid51 red
thanks

Just reflash main. You won't lose anything.

[boysie]

try to flash with cid 49 brown first. then flash again with cid 53 via setool. tick signed phone and customize phone

What the f?!

[marekpc]

No good. Chenged cid 51 to 52 to use patch method (xs++). Flashed with cid 52 soft - phone is working now BUT....as i expected its got simlock back. Wanted to apply patch i made but cant connect to setool or xs++.
When i try to connect with 'c' pressed i switch on the phone to normal mode and i got message:
' phone pre-boot failed, possible RECOVERY needed '.
What to do now?

[satch1234]

No good. Chenged cid 51 to 52 to use patch method (xs++). Flashed with cid 52 soft - phone is working now BUT....as i expected its got simlock back. Wanted to apply patch i made but cant connect to setool or xs++.
When i try to connect with 'c' pressed i switch on the phone to normal mode and i got message:
' phone pre-boot failed, possible RECOVERY needed '.
What to do now?

Don't switch on the phone,it must be OFF.Remove battery for 5-10 seconds then insert it back and follow instructions.

[marekpc]

phone is off when im connecting to setool. It doesnt go into pre-boot mode - when i try to conect it switches on to normal mode

[satch1234]

phone is off when im connecting to setool. It doesnt go into pre-boot mode - when i try to conect it switches on to normal mode

Clean usb connector with needle(golden contacts)on your phone and try again.If same then probably pins inside the phones are broken and need to resolder or replace connector.

[nobitalt]

try upgrade with seus, or download both FW and CDA, then just flash it, naturally, phone loses everything once stored in the phone.

[satch1234]

try upgrade with seus, or download both FW and CDA, then just flash it, naturally, phone loses everything once stored in the phone.

Please read posts carefuly.His phone can't be detected so it is not possible to upgrade/flash that phone with any software including SEUS untill he solve that problem.