Results 1 to 6 of 6
  1. #1
    Recently Initiate
    Join Date
    Apr 2012
    Device
    -
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts

    K610i flashed and booting yet WSOD remains...

    I have a K610i that is suffering from the White Screen of Death. I have flashed the phone using both SETool Lite 1.11 and Wotanserver 3.8. The handset is now booting and I can play the demo video but the screen still remains pure white.

    I have tried both the Unlock/Repair and Recovery options in SETool but to no avail.
    Unlock/Repair: Completes successfully but does not solve problem.
    Recovery: Throws error, "Failed to find resource !"

    I also know the screen is good because I have hooked it up to another K610i. I just don't get it.

    SETool log: -
    Code:
    Welcome to SEtool2 ( LITE edition ) v 1.11
    supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
    Loaded 51 flash descriptors
     
    if you like LITE edition - please visit www.setool.net and buy FULL.
     
    ChipID:9900,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:52
    Speed:921600
    Flash ID check:2019
    Flash props sent ok
    OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:RED
    FLASH CID:52 COLOR:RED
     
    Model:K610i
    Brand:Generic Trade UK
    MAPP CXC article: R1KG001     prgCXC1250374_GENERIC_TH
    MAPP CXC version: R1KG001
    Language Package:EUROPE_2
    CDA article: CDA102497/61
    CDA version: R5A
    Default article: cxc1250376
    Default version: R1KG001
     
    Network LOCKED
    Operator: MULTIPLE
     
    Elapsed:6 secs.
    ChipID:9900,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:52
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:RED
    FLASH CID:52 COLOR:RED
    LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    Flash ID check:2019
    Flash props sent ok
    writing F:\drivers\k610i\firmware\K610_RED_CID52_R3B021_EROM-FOTA_2006-12-18_15.bin
    CURRENT FLASH FILE CID:52
    SSW uses complete hash, hash len is:80
    Will flash 4 blocks...
    SSW loading returns:0
    Elapsed:15 secs.
    RECOVERY MODE STARTED
    skipping empty loader...
    All possible recovery loaders fail. That phone not supported
    Elapsed:22 secs.
    ChipID:9900,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:52
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:RED
    FLASH CID:52 COLOR:RED
    LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    Flash ID check:2019
    Flash props sent ok
    writing F:\drivers\k610i\firmware\K610_R1KG001_FS_EUROPE_2_RED52.fbn
    CURRENT FLASH FILE CID:52
    SSW uses complete hash, hash len is:2340
    Will flash 117 blocks...
    SSW loading returns:0
    Elapsed:71 secs.
    RECOVERY MODE STARTED
    skipping empty loader...
    All possible recovery loaders fail. That phone not supported
    Elapsed:17 secs.
    ChipID:9900,EMP protocol:0301
    BOOTROM MODE DETECTED
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:N/A
    FLASH CID:52 COLOR:RED
    LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    Flash ID check:2019
    Flash props sent ok
    CSloader version:
    070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
    loader startup: executed
    loader GDFS startup: executed
    USERCODE reset to 0000
    Elapsed:23 secs.

  2. #2
    Top Sony Team satch1234's Avatar
    Join Date
    Jun 2009
    Device
    Xperia Go
    Posts
    440
    Thanks
    5
    Thanked 68 Times in 61 Posts

    Re: K610i flashed and booting yet WSOD remains...

    If flashing was done correctly and display is working fine on another phone then check the board is it water damaged and try to clean/resold display connector and small capacitors close to connector on the board.I had same problem on 2 k610 and after i resold display pins and capacitors on the board all was fine.If some track is broken you'll have to make jumper.
    Regards
    Satch

  3. #3
    Recently Initiate
    Join Date
    Apr 2012
    Device
    -
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: K610i flashed and booting yet WSOD remains...

    Thanks for that, Satch. I have never soldered anything so small and delicate as a mobile phone PCB. This could get interesting!

  4. #4
    Top Sony Team satch1234's Avatar
    Join Date
    Jun 2009
    Device
    Xperia Go
    Posts
    440
    Thanks
    5
    Thanked 68 Times in 61 Posts

    Re: K610i flashed and booting yet WSOD remains...

    Quote Originally Posted by leadweight View Post
    Thanks for that, Satch. I have never soldered anything so small and delicate as a mobile phone PCB. This could get interesting!
    You are welcome,first check all contacts on PCB display connector.If some contact is black(it is burned and have oxide on it) or you can see something like white powder(water damaged) then try to clean it very gently with alcohol.If same then try to resold pins or take the phone to some private repair/unlock shop,he can change connector if needed.
    Good luck,
    Satch

  5. #5
    Recently Initiate
    Join Date
    Apr 2012
    Device
    -
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: K610i flashed and booting yet WSOD remains...

    Right. I couldn't crack the phone fully open up to now because I didn't have a T6. Now that I have the phone open I think I have bitten off more than I can chew.

    IMG_0520.jpgIMG_0521.jpgIMG_0524.jpgIMG_0526.jpg

    I can't spot any bad contacts and even if I could they are so tiny I don't think I could do anything about them. Any thoughts?

  6. #6
    Top Sony Team satch1234's Avatar
    Join Date
    Jun 2009
    Device
    Xperia Go
    Posts
    440
    Thanks
    5
    Thanked 68 Times in 61 Posts

    Re: K610i flashed and booting yet WSOD remains...

    Hi,it's hard to tell from here but i would take the phone to some repair shop to resold lcd connector or replace it.You can just tell the man that you flashed phone and replaced lcd from a good working phone then he will tell you what he think about it.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •