[TUTORIAL] Patching DB2020 using Any/ALL CID method for Newbie
This tutorial is for Patching db2020 Sony Ericsson phones and all CIDs. So you can now patch your CID53 phone with this guide. You can also use this method to patch CID49, CID51 and CID52 also. Thus you can unlock your phone with unlock patch if you want to do so.
You can find out your phone platform, if its db2020 or not from the Topsony Phone Database. Select db2020 in the left column and it will show all db2020. Or else select All in Platform and Click on phone in the Right column, it will show information about your phone platform and also possible CIDs. Its a pretty easy to use tool.
WARNING ! The author or topsony.com cannot be held responsible for any damage of your phone. Use this Tutorial at your own risk !
Download Link:->
- Install USB Flash Drivers( You must install usb flash drivers, if not already installed.)
- JD Flasher (Updated for AnyCID). (The main tool)
- Any/All CIDs Patching Files.
Part 1 : Preparations and Basic Setup.
Charge your phone to 100%. At least 95% battery levels are necessary before patching or unlocking or flashing.
Extract the AnyCID.ZIP. In your phone folder, you should find a zip file which contains executor.b !
As an example you can find the following zip file in w580 directory R8BE001_CXC1123362_GENERIC_LA ! This is the ByPass Package for w580 R8BE001 Firwmare.
Here RBBE001 indicates the main firmware version for which the executor.b works. So you better make sure you have a main firmware for which executor.b is available.
Download the Main Firmware (*.mbn) of your Sony Ericsson Phone and Rest Files according to your Main Firmware from topsony.com [Download Section] for firmwares.
Keep a note of this file, The Rest file for your main firmware. We need this file later.
Now in jdlfasher\2020_52 folder you will find qamaker.exe, drag and drop your main firmware onto qamaker.exe. You will get the Quick Access Patch for your phone.
We continue with our example phone, Enter AnyCID\w580. Extract the zip file R8BE001_CXC1123362_GENERIC_LA to get tpa\preset\custom\executor.b !
And in the db2020.zip you will find executor.jar and customize_upgrade.xml ! These files are also needed.
Also in the AnyCID folder you will find a file qa2020.xml copy it to jdlfasher\scripts\**here**; Over write the old qa2020.xml with new one from Any CID.
Part 2: Flashing, Copy Breaking files to File System.
We now have to copy the 3 files executor.b, executor.jar, customize_upgrade.xml to tpa\prest\custom in the phone’s file system. This is pretty easy with Jdflasher.
Shutdown phone.
Re-Insert Battery.
- Start Far.exe
- Press "ALT+F1" on your keyboard.
- Select your db2020 in Script option, Select port as DCU-60, And select Maximum Speed 921600.
- Also Uncheck the RSA option, this can cause problems.
- Now "Jump Down Into A Large Rabbit Hole". I mean Click that option,Jdflasher will initialize and you will will get few options on the left side. Right side is your computer’s file system.
- Now Double Click "OFS". Jdflasher will start the file system loader and finally you should enter the phone file system.
- Enter tpa and then preset and then finally custom folder.You should now be in tpa\preset\custom\ folder in the phone file system.
- Now copy all the the 3 files to this folder, executor.b, executor.jar, customize_upgrade.xml
Disconnect phone and re-insert battery and start phone.Originally Posted by How copy is done in JDFlasher
Part 3: Installing Quick Access !
- After starting phone,Go to Entertainment and then Games(Start phone\Menu\Entertainment\Games\). Run the executor in games. Your phone will turn off.
- Now Re-insert Battery. Don’t start the phone.
- Start "Far Manager".
- In The Script option select script as qa2020 !
- Press "Enter the Rabbit hole once more "!
- Enter "bflash" this time.
7. Naviate to rest folder on jdflasher. Its time to flash the Rest file.
Click on your Rest File.
Press "F5" on the keyboard, then click "copy", then in 2nd screen click "flash". (Flash as a BABE).
8. Now Navigate to 2020_52 folder, click on your quick access patch, so that its selected.
Hit "F5", click "copy", hit "flash" ! It should be flashed as a VKP.
JDflasher will now flash the Quick Access VKP and Install it !
Exit bflash through "...” option.
Unplug phone, re-insert battery. Re-start phone.
Start phone, navigate to games, Delete executor.
Quick Access has now been installed into your phone. Patching the phone now becomes very easy.
Part 4: Patching !
You can now apply any number of patches you want.
Shutdown phone. Re-Insert Battery.
- Select "qa2020" as script.
- Start Jdflasher, "jump in rabbit hole".
- Enter "bflash". Navigate to patch.
- Select the patch, press "F5" and then click "copy" and then click "flash". Flash as a VKP. (apply any number of patches in the session.)
- Exit "bflash".
Dis-connect phone, Re-Insert Battery and Start phone.
Repeat only Part 4 whenever you want to apply a patch.
Optional Part 5: Removing a Patch.
- Start jdflasher.
- Enter via "qa2020".
- Select the patch on your computer which you want to remove.
- Press "F5", Click "copy", then in the flash window, select "flash" as a vkp and Tick the option to "remove patch" and click "flash it".
The patch will be removed.
Note: Before going to patch your DB2020 Sony Ericsson Phone Collect qa access patch and rest files according to your phone's Firmware version.Be Carefull.