Results 1 to 1 of 1
  1. #1
    Advanced user rapidroll's Avatar
    Join Date
    Jul 2011
    Device
    [ K510i ] & [ W550i ] & [W580i]
    Posts
    192
    Thanks
    9
    Thanked 184 Times in 143 Posts

    Angry [TUTORIAL] Methtod to upgrade your DB2020 Sony Ericsson CID49/CID51 to CID52

    [TUTORIAL] Methtod to upgrade your DB2020 Sony Ericsson CID49/CID51 to CID52

    Why this Tutorial : Because SEUS will update phones to CID53 and we don’t have all the CID53 loaders and softwares, so no unlocking or patching if your phone is CID53.
    If you are here then its mostly because your phone turned out to be DB2020 CID49/51 and you want to update phone to CID52. Please note this tutorial is only for db2020 phones are
    k530, k550, k610, k770, k790, k800, k810
    and
    w580, w610, w660, w710, w830, w850, w880
    etc.


    : WARNING ! Using XS++ will void your Warranty. The author or topsony.com cannot be held responsible for any damage of your phone. Use this TUTORIAL at your own risk !

    Download Link:->

    (a) SETool 2 Lite. !
    (b) XS++ (Sony Ericsson Customization tool)
    (c) Upgrade_Script_071219_DB2020_CROD_CID_49___51_to_C ID52_Red.zip !


    • If you are using XS++/SeTool 2 lite for the first time.
    • Do a GDFS Backup using SeTool 2 lite only if you not done gdfs backup already.
    • Please be very careful with SeTool 2 lite, it will kill your phone beyond repair if you press wrong buttons and choose wrong options.
    • Also Recharge your phone’s battery to full.

    This method works only if your phone’s IMEI first 6 digits match with any of them in this IMEI list. Know it from the attachments (IMEI list).

    Backup ur GDFS :


    • Turn off your phone, Reinsert battery.
    • Start SeTool 2 lite.
    • Choose your phone in Phone Type.
    • Click Read GDFS.
    • Connect Phone Holding C.
    • Wait.
    • When GDFS is read out, SeTool 2 says Elapsed XX Seconds.
    • Unplug phone, Backup is stored in SeTool 2 lite folder.

    Note: If your phone is db2020 then you can choose any db2020 phone, Example if you have k790 and you choose phone as w610 then it will work because both are db2020.
    Also note that Using SEUS to update phone’s CID is now a very bad idea beacuse it updates phone to CID53 which is not at all desirable. So do not use SEUS at any cost.


    Updating to CID52:


    • Turn off your phone, Reinsert battery
    • Start SeTool 2 lite.
    • In Misc, Click ‘….’ and select the upgrade script.
    • Click Write SCRIPT
    • Reinsert Battery
    • Connect phone holding C
    • Wait for a few seconds
    • When done it says elapsed XX second, disconnect phone.

    Don’t Press Write GDFS.


    Now click identify and connect phone again, so check if phone has been updated to CID52 or not !
    You can use XS++ also to check if updated or not.
    Attached Files

  2. The Following User Says Thank You to rapidroll For This Useful Post:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •